整体式无接触热阻散热器传热元件的研究

介绍了国内首次研制成功的Al质整体式无接触热阻散热器翅片管传热元件的结构与特点 ,对整体式无接触热阻散热器与管带式散热器进行了对比试验 ,并对试验所得的传热与阻力进行了分析。试验结果表明 ,无接触热阻散热器传热性能和可靠性优于管带式散热器 ,且体积小 ,质量轻 ,工序少 ,是目前车用管带式散热器理想的替代产品     

LZH-25C沥青混合料转运车的应用研究

介绍了LZH-25C沥青混合料转运车在杭州—千岛湖高速公路上的应用，通过室内试验和现场检测．阐述了该型转运车的使用效果，证明了其能有效减小沥青混合料的级配离析和温度离析，提高沥青路面的均匀性。     

利用物理模型研究热扩散问题

山东威海华能电厂循环冷却水正态物理模型试验的目的是研究电厂设备冷却水排入海中后对海域及取水口的热污染问题,本文剖析了试验过程,内容包括电厂附近海域的自然条件分析、热扩散理论在模型中的应用、模型设计思想、试验设备量测系统与试验方法以及模型试验中需要探讨的问题。     

Global cutting-path optimization considering the minimum heat effect with microgenetic algorithms

This article considers microgenetic algorithms (GAs), which explore in a small population with a few genetic operators, for cutting-path optimization problems. The major difference between GAs and simple genetic algorithms (SGAs) is how to make a reproductive plan for an improved searching technique because of population choice. It is shown that GAs implementation reaches the near-optimal region much earlier than the SGAs approach, and the GAs give a better solution than simulated annealing (SA). The main objective was to determine what temperature distribution can be obtained from the solution of a travelling distributed heat source. The solution of the travelling heat source on nested raw plate provides information about the vertices of each nested part of the raw plate. From the fact that the initial temperature at a piercing point strongly depends on the heat flow which stems from the previous cutting contour, the temperature of all piercing points must be lower than the critical temperature after each cutting of the components of a part. The critical temperature is identified as the mechanical melting temperature of steels. A heuristic back-tracking method is introduced to find the near-optimum cutting path considering the minimum heat effect on deformation. The heuristic back-tracking method is incorporated with the GAs.     

A pseudofield model approach to simulate compartment-fire phenomena for marine fire safety design

In order to prevent the spread of marine compartment fires, it is necessary to understand the governing factors or characteristics of fire-spread phenomena. We present a pseudofield model approach to this problem. We first described a field model of turbulent heat convection based on a standard k – turbulence model. Two-dimensional numerical simulations of a two-linked compartment fire were carried out in order to predict the turbulent convection flow induced by the heat released from the fire. Then a more complicated fire-spread problem of multilinked compartment fires was analyzed by means of a zone model, in which the amounts of oxygen consumption and gas generation were solved by a gas-balance equations system. The effect of threshold conditions on fire propagation and the effect of the thickness of the heat insulation were investigated with numerical simulations.     

深圳地铁14号线黄木岗站三线换乘方案研究

深圳地铁14号线黄木岗站与既有7号线、近期规划24号线黄木岗站形成地下三线换乘车站，车站周边环境复杂。如何综合各种边界条件形成建筑功能完善，结构经济安全，同时又对周边环境影响最小的方案是本站研究的重点，特别是车站站位及换乘功能的研究。方案设计过程中，通过逐一梳理地面建筑、地下建(构)筑物、地面交通、片区规划、工程地质条件、客流预测、车站换乘功能等边界条件，总结黄木岗站立交桥安全、交通疏解、管线改迁、结构工法、施工器具选择、车站站位及换乘功能等重难点，采取逐项突破的方法，最终推演出“干”字形节点换乘方案，其中14号线采用地下3层双叠侧式车站，与7号线形成平行同台换乘，与24号线形成台-台换乘。     

水火弯板建模系统研究

以逐步回归分析和改进的Ｂ－Ｐ神经网络两种方法为算法,基于Ｍｉｃｒｏｓｏｆｔ Ｖｉｓｕａｌ Ｂａｓｉｃ３．０软件平台,应用实船板样本数据,开发了水火弯板局部收缩量的建模系统。     

深长桩荷载-位移曲线计算研究

近年来，城市及交通建设发展迅速，随着上部结构荷载的增大及容许沉降的减小，深长桩的应用越来越广泛。深长桩的力学性态分析成为桩基础研究中一个非常重要的组成部分，桩顶荷载一位移曲线是桩基础设计的核心内容。     

有移动热源的海上大空间通风技术研究

由于有某种热源在海上大空间内移动,使得大空间通风系统也与其他一般大舱空间的通风系统不同.目前国内外对海上大空间通风系统尚无明确的规范及要求.在对大空间通风进行模型试验研究和相应的计算机模拟计算基础上,确定大空间通风系统初步方案,为大空间通风系统设计提供科学合理的试验和理论依据.     

型钢混凝土转换梁在城市轨道交通高架车站中的应用

城市轨道交通高架车站因受环境的制约和建筑设计的要求,常需采用转换梁结构。结合工程实例,介绍了型钢混凝土转换梁在某城市轨道交通高架车站中应用情况,对结构方案比选、构件截面设计、指导规程选择及施工措施等进行了论述,提出型钢混凝土转换梁能够提高高架车站复杂结构关键部位的受力性能,满足特殊的建筑功能和造型要求,可为类似工程提供参考。