湿陷性黄土地基强夯和冲击压实技术经济分析

0引言湿陷性是指土在自重或附加应力与自重共同作用下受水浸湿后产生急剧而大量的下沉。国标中规定:当sδ≥0.015时,为湿陷性黄土。通常湿陷性黄土地基较多采用强夯法处理,其主要特点是适应性强,经济简便;而冲击压实技术是20世纪90年代从南非蓝派公司引进,具有减少工后沉降效果     

影响沥青路面平整度因素分析及处治措施

从影响沥青路面平整度的各个方面查原因、找对策,总结对道路施工平整度的控制,特别是沥青路面施工平整度控制的经验,为公路设计和施工提供一定的参考.     

工程机械柴油机的匹配选择

为选择适应工程机械使用特点的柴油机，对工程机械配套的柴油机选型方式进行了概括分析，着重介绍在柴油机对比选择时的关键性能参数。说明了工程机械用柴油机抗过载能力的特殊要求，总结出通过性能参数和曲线的对比来匹配选择柴油机的方法。     

我国高速铁路速度目标值问题的研究

196 4年日本建成东海道干线时速 2 0 0 km/h的高速客运铁路 ,揭开了世界高速铁路发展的序幕。由于高速技术日趋成熟和它自身所具有的技术经济特征 ,适应了各国经济、社会发展的需要 ,世界各国竞相提高速度、修建高速客运铁路 ,至今已有 10个国家 (日本、法国、英国、美国、意大利、西班牙、荷兰、俄罗斯等 )建成时速 2 0 0 km/h以上的高速铁路。高速铁路的修建和发展标志着世界铁路已进入了向高速发展的新时代。本论文不涉及对高速铁路系统模式优劣的比选 ,仅就对已报国家审批的高中速共线方案的高速铁路中的有关问题进行研究和探讨。本文提出了我国发展高速铁路是当务之急 ,讨论了高速铁路目标值的确定 ,对于高中速共线运行方案下的有关部分参数选取 ,提出了优化方法 ,以期为高速铁路规划和建设作参考 ,为深化研究提供基础条件。     

复合材料圆柱壳的稳定性及其优化设计

本文分别利用一阶剪切理论和Reddy高阶剪切理论计算了考虑横向剪切变形影响的复合材料层会圆柱壳的线性失稳载荷和几何非线性失稳载荷。分析了壳体的几何参数、铺层数、铺层角、半径厚度比值对失稳临界行值的影响。铺层的优化设计中利用随机试验法与可变容差法相结合，计算了寻求临界行值最大的铺层角最优问题，并利用约束非线性混合离散变量优化程序对铺层角为离散值的情况进行了优化。碳纤维环氧树脂圆柱壳模型试验表明本文计算结果是可靠的。     

房室隔疏松组织间隙及其有关的组织结构

利用４例人心房室隔水平连续组织切片，观察了房室隔内的疏松组织间隙和与其有关的组织结构：包括心房肌至房室结的过渡性心肌纤维，冠状窦末段的形态结构以及冠状窦口后方的右房后窝等。并结合临床进行了讨论。     

略论施工机械的选型

施工机械的选型,是施工机械前期管理中的一个重要问题.本文就施工机械选型前的准备工作,选型的基本原则,选型的经济性评价等方面进行了阐述论证,提出了施工机械选型的十条基本原则和定量评估的方法.     

Reliability-based calibration of fatigue design guidelines for ship structures

A simple reliability-based framework is applied to calibrate a new set of fatigue design guidelines. This new guideline considers two different approaches for the assessment of both loads, stresses and local stress raising effects, and partial safety factors must be given for any combination of these approaches. For the calibration, the lognormal reliability format is adopted because the hereby-derived partial safety factors can be combined arbitrarily. This means that with a few basic partial safety factors, the combination of partial safety factors to be applied together with any combination of calculation approaches can be determined easily. In the present paper both the adopted reliability format, the applied modeling of uncertainties and the selected target safety index are explained. Based on this, a new guideline is calibrated and the derived partial safety factors are presented. Finally, the new guideline is applied through a numerical example in order to show the applicability of the calibrated partial safety factors, and satisfactory results are found.     

双线自动闭塞区段旅客列车扣除系数计算方法的探讨

本文对旅客列车影响区和非影响区进行了分析，进而确定了非影响区及影响区内可铺画的货物列车数，提出了双线自动闭塞区段旅客列车扣除系数的分析计算方法。     

Mobile phone use while driving: public opinions on restrictions

This paper reviews two road-user surveys on the use of mobile phones on the road in Finland where the mobile phone ownership rate is highest in the world (70% in August 2000). From 1998 to 1999 the proportion of drivers that chose to use a mobile phone while driving rose from 56% to 68%, while the proportion of phone using drivers who experienced dangerous situations due to phone use rose from 44% to 50%. The proportion of drivers who used their phones in some way to benefit safety on the road remained at about 55%. The youngest, novice drivers had the highest level of phone usage of all age categories. Over 48% of the interviewees believed that the government should ban the use of hand-held mobile phones while driving, and another 27% believed that all types of mobile phone use should be banned while driving. Those drivers who used their phones the most each day were more likely to want some form of restrictions, than those who had lower usage. This is a strong message to the elected lawmakers and raises the problem of exactly how regulatory bodies would go about controlling the future growth of new driver support and non-driving related communication devices in road vehicles. It was concluded that legislating for hands-free use only would be a reasonable course of action. Mandating that the current generation of equipment should be optimized for hands-free use should result in future generations of in-vehicle equipment also being optimized for hands-free use as a minimum criterion.