海上装配式混凝土石油平台设计

以渤海湾某油田为例,针对海油陆采一体化技术所需平台的功能要求,基于我国水运工程规范体系及现状技术水平,提出一种适用于油田开采的新型装配式混凝土平台结构方案,并对平台的结构设计理念、规范适应性研究、设计方案、施工船机配置、平台弃置等进行研究,可为类似海上大型平台结构提供借鉴。     

基于CBM的船舶设备健康管理系统

结合分析基于CBM的船舶设备健康管理系统及其国内外研究现状,设计了系统实施流程、技术和功能架构；通过开展状态监控技术、综合诊断技术以及健康评估技术的研究,进行综合状态评估，实现船舶设备健康管理。最后,从数据采集、状态评估、性能预测和维修决策支持等方面对实现系统的关键技术进行论述。基于CBM的船舶设备健康管理系统实现了对船舶设备健康状态及趋势的实时知悉,并对使用、维修活动的决策提供了辅助支持功能,从而降低设备维修费用,提高船舶设备使用效能。     

考虑横向漂移的船舶路径跟踪自抗扰控制

针对船舶运动系统中内部动态不确定和外部干扰等问题,进行了欠驱动船舶路径跟踪的自抗扰方法研究。利用Backstepping设计参考航向角,并通过线性扩张状态观测器对流干扰和横向运动引起的横向漂移进行估计。其次,根据自抗扰算法对航向进行控制,采用线性扩张状态观测器对外界干扰及内部不确定项进行估计。最后仿真结果表明,在风流干扰下所设计的控制器仍能使船准确地跟踪上参考路径,验证了所提控制方案的有效性。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

西津水利枢纽二线船闸下游引航道右岸支流汇入口消能设施设计

西津水利枢纽二线船闸工程是建设"西江亿吨级黄金水道"的重要举措之一。为研究二线船闸下引航道停泊段右岸西竹坑支流的汇入对二线船闸下引航道内通航水流条件的影响,通过水工模型试验研究在支流沟内布置消能设施对支流入汇口处流速、流态的影响,提出斜向导流坝、消力墩和消力池的工程措施,为类似工程提供借鉴。     

基于任务需要的海警大型舰艇基本需求建模与分析

以线性和非线性需求结合方式建立了以满足任务需要为条件的海警大型舰艇基本需求组合模型,预测计算了多个样本国海警大型舰艇基本需求数,结果表明该模型有一定的实用性.据此对中国海警大型舰艇基本需求进行预测,预测结果可对中国海警大型舰艇发展规划提供参考.     

船型参数对骑浪/横甩薄弱性衡准影响研究

骑浪/横甩是IMO船舶第二代完整稳性的五种失效模式之一,是一种基于概率的稳性衡准,制定规范的目的是更有效地保障船舶在实海域中的航行安全,确保不发生稳性失效情况.本研究中,以IMO有关成员国提出的最新版骑浪/横甩薄弱性衡准草案为基础,基于自主开发的骑浪/横甩薄弱性衡准校核软件,针对围网渔船开展了样船计算和比较分析,研究IMO正在制定的骑浪/横甩薄弱性衡准方法对该类船型的适用情况,分析船型参数对骑浪/横甩薄弱性衡准的影响,为我国参与国际法规制定,提出针对骑浪/横甩薄弱性衡准的提案提供技术支撑和依据.     

船舶机舱含油污水用膨胀石墨/活性炭复合吸附剂试制

以蔗糖为碳源,以磷酸为活化剂,在浸渍比(磷酸质量/蔗糖质量)2.5、活化温度550℃下制备活性炭,在膨化温度900℃和膨化时间25s下制备膨胀石墨,复合膨胀石墨/活性炭吸附剂,并测试膨胀石墨密度0.02g/cm3～0.05g/cm3、乳化油流率0.07mL/s～0.6mL/s、吸附柱高度10mm～30mm时的吸油效果。结果表明:在吸附柱高度20mm、乳化油流率小于0.4mL/s时,0.1‰的乳化油经膨胀石墨成型密度为0.03g/cm3的复合吸附剂过滤后的含油量可低于0.005‰;膨胀石墨成型密度0.03g/cm3、乳化油流率0.4mL/s时,吸附柱高度20mm的处理污水含油量小于0.015‰的总处理量为10.35L,即单位体积吸附剂的乳化油处理量为0.3255L/cm3。因此,应根据船舶机舱油水分离器的技术要求,优化复合吸附剂含油污水处理流程。     

Studies on emergency evacuation management for maritime transportation

Marine transportation is a vital component of the world’s economy and transportation network. The number of people using passenger ships around the globe is increasing worldwide. Similar to other transportation systems, passenger safety is critical in maritime shipment. As emergency evacuation processes for ships are highly different from and more complicated than those for buildings and other vehicles, many researchers have published a vast range of documents related to this peculiar research area. However, there is a tangible lack of sufficient literature review studies that investigate marine emergency evacuation (MEE). That being the case, the potential of marine transportation and the effect of emergency evacuation operation on life safety have inspired the proposal of this study. This paper offers a review of the available literature on MEE modelling, analysis and planning during the period from 1973 to 2017 using a systematic approach. After reviewing relevant academic journals, peer-reviewed conference papers, and technical reports of agencies, relevant literature is analysed. In addition, the literature review is extended by means of proposing a framework methodology which considers different possible conditions and situations during MEE. Finally, insights for ship managers and policymakers are discussed and potential future research directions are identified.     

基于插补原理的船体复杂曲面加热线布置方法

船体曲面成形技术是船舶加工过程中重要的环节。如何更好更快实现船体复杂曲面加工,一致以来备受国内外学者的关注。本文借鉴插补原理,对传统船体复杂曲面加热线布置进行了优化设计,得到了圆弧形板、s形板、帆形板和马鞍板的加热线。采用COMSOL Multiphysics多物理场仿真软件,分析四种加热线下钢板变形情况,并通过实验检验了插补形式下的船体曲面成形效果。结果表明：(1)插补算法得到的船体曲面加热线路程比传统加热线路程节约75%以上。(2)对有限元计算位移进行曲面拟合,得到的预测模型与实际船体曲面基本一致。(3)实验了四种曲面加热线,并将有限元预测位移与实验进行对比,二者误差在6%以内,有限元计算与实验结果基本吻合。该方法降低加工时间,提高加工效率。