Dynamic response of a SWATH vessel for installing pre-assembled floating wind turbines

New and efficient installation concepts which can reduce the cost of developing an offshore wind farm are of particular interest. This paper explores a promising concept using the small water-plane area twin-hull vessel (SWATH) to install pre-assembled wind turbines (OWT) onto floating spar foundations. A focus is placed on the hydrodynamic performance of the SWATH and the response analysis of the coupled SWATH-spar system. Firstly, the numerically calculated difference-frequency wave force effect and damping forces of the original SWATH were verified with experimental data. Secondly, the original SWATH was modified to satisfy the criteria of weight-carrying capacity and hydrostatic stability. Thirdly, a multibody numerical model for the SWATH-spar system was developed, in which the hydrodynamic and mechanical couplings between the SWATH and a spar were considered. The SWATH is equipped with a dynamic positioning system to counteract the slow-drift wave force effects. The nonlinear time-domain simulations were carried out for the mating stage when a wind turbine is lifted above the spar foundation. Based on the analysis of statistics of the relative displacement and velocity of the tower bottom and the spar top, the installation concept with SWATH is found to be of decent performance. Finally, recommendations are provided for future research on this concept, which contributes to developing next-generation installation concepts for bottom-fixed and floating wind farms.     

Validation of earthquake analysis methodology of a suction-caisson foundation-structure through model testing

Suction caissons are one of the most widely used foundation solutions for subsea structures and wind farms. Seismic response of subsea structures is however seldom documented properly, often just treated as a foundation capacity issue applying a quasi-static acceleration and not considering the inertial interaction between the structure and the soil. The more relevant tasks to document are the motions of the unit and the response of the externally connected flowlines and equipment/systems on the unit.Based on a case study located in the Shah Deniz field in the Caspian Sea, model centrifuge tests and numerical modelling were carried out to validate the global response of a 4-caisson supported manifold structure subject to seismic motions in soft clay. The centrifuge tests were carried out at 58 g at the centre for geotechnical modelling at UC Davis. To simulate the soil-structure interaction, a series of non-linear springs defined by kinematic hardening models were used in analyses with the ABAQUS software. This development includes the algorithms for determining the required model parameters. A very good agreement between recorded response from the centrifuge test and calculated response from the FE-analyses was achieved.The development and validation of the soil model presented in this paper is an improvement in design methodology for caisson foundations subjected to earthquake loading. The non-linear soil springs are well suited to incorporate in more detailed structural analyses where an accurate representation of the foundation response is required. The paper also briefly describes how the subsequent earthquake design analyses were performed for the Shah Deniz manifold structures making use of the validated soil spring model and the added value it gave to the project.     

Review of the uncertainties associated to hull girder hydroelastic response and wave load predictions

This paper reviews the importance of uncertainties in hull girder loads influenced by flexible fluid structure interactions. The focus is on developments in the field of hydroelastic modelling, simulation and model tests of practical relevance to the prediction hull girder wave load predictions and their validation. It is concluded that whereas hydroelastic methods for use in design development and assessment become increasingly useful, challenges in realizing and modelling uncertainties can be attributed to: (1) the limitations of numerical methods to suitably model nonlinearities; (2) the ambiguity of model tests; and (3) the systematic use of data emerging from computational, model- or full-scale methods. An approach is recommended to assess the uncertainty in the hydroelastic responses to wave loading and an example is provided to demonstrate the application of the procedure.