考虑游览船运营特征的航道通过能力评价方法

为构建客货船舶协同动态运行控制技术体系，以经典航道通过能力模型为基础，构建基于游览船运营特征(发船高峰性和航线集中度)的航道通过能力模型.根据黄浦江游览核心区船舶自动识别系统(AIS)数据，对所提出的航道通过能力模型进行实证分析.研究结果表明，本文航道通过能力模型能够较为准确地评价研究区域的实际航道通过能力.游览船发船高峰时期与现有航线规划条件下，黄浦江游览核心区航道通过能力(76艘/h)趋近饱和状态；当过境船到达超过69艘/h时，建议海事相关部门采取“错峰”航行等相关政策.     

Airport capacity increase via the use of braking profiles

Many airports are encountering the problem of insufficient capacity, which is particularly severe in periods of increased traffic. A large number of elements influence airport capacity, but one of the most important is runway occupancy time. This time depends on many factors, including how the landing roll procedure is performed. The procedure usually does not include the objective to minimize the runway occupancy time. This paper presents an analysis which shows that the way of braking during landing roll has an essential impact on runway throughput and thus on airport capacity. For this purpose, the landing roll simulator (named ACPENSIM) was created. It uses Petri nets and is a convenient tool for dynamic analysis of aircraft movement on the runway with given input parameters and a predetermined runway exit. Simulation experiments allowed to create a set of nominal braking profiles that have different objective functions: minimizing the runway occupancy time, minimizing noise, minimizing tire wear, maximizing passenger comfort and maximizing airport capacity as a whole. The experiments show that there is great potential to increase airport capacity by optimizing the braking procedure. It has been shown that by using the proposed braking profiles it is possible to reduce the runway occupancy time even by 50%.     

A capacity maximization scheme for intersection management with automated vehicles

With the advent of connected and automated vehicle technology, in this paper, we propose an innovative intersection operation scheme named as MCross: Maximum Capacity inteRsection Operation Scheme with Signals. This new scheme maximizes intersection capacity by utilizing all lanes of a road simultaneously. Lane assignment and green durations are dynamically optimized by solving a multi-objective mixed-integer non-linear programming problem. The demand conditions under which full capacity can be achieved in MCross are derived analytically. Numerical examples show that MCross can almost double the intersection capacity (increase by as high as 99.51% in comparison to that in conventional signal operation scheme).     

车辆牌照信息调查法在公路OD调查中的应用

分析停车问询调查法和车辆牌照信息调查法在公路OD调查中的优缺点,结合浙江省两次全省公路OD调查的实际经验,指出公路OD调查自动化和常态化的发展方向.     

铁路货物追踪系统的构建

铁路货物运输组织是铁路工作的一个核心内容,铁路货物追踪系统的设计与实现能够为货主提供更好、更快的服务,同时加快和保障铁路货运工作的组织。通过对铁路整车货物运输的流程分析,制定货物追踪系统的目标,分析系统功能。通过数据的采集和信息共享平台的建立,提出货物追踪系统的实现途径。     

基于信息熵的频谱感知方法

频谱感知是认知无线电的关键技术之一。讨论了一种利用信息熵的频谱感知方法,并以IEEE 802.22的一种主用户信号对算法性能进行了仿真分析。仿真结果表明这种方法能够克服噪声功率不确定性的影响,而且对信息熵估计时的参数选择不敏感,在低信噪比下能够获得较好的检测性能。     

VTS中雷达信息与AIS信息融合的探讨

文章对VTS中雷达信息与AIS信息的来源、种类与特点进行了比较,论证了两者信息融合的可行性与必要性,同时给出了信息的融合模型与方法,也提出信息融合需要进一步解决的问题.     

泥浆悬浮砂粒能力分层测定试验研究

为实现泥浆悬浮砂粒能力的量化分析,提出一种分层测定方法,选取12%、15%和18%3种质量分数的试验泥浆,通过自行设计的分层取样装置进行试验研究,获取不同泥浆质量分数、沉降时间和砂粒粒径条件下的10个深度分段的砂粒质量分布,分析各参数影响下的砂粒沉降变化规律。结果表明:1)该分层测定方法可较好地获取不同深度分段的砂粒质量,弥补现有测定方法只能获取底层砂粒沉降质量的不足;2)试验所采用的3种质量分数的泥浆对0.1 mm以上粒径的砂粒悬浮能力均较差。根据砂粒沉降曲线分布特征,提出一种用于判别泥浆悬浮砂粒能力的方法,即砂粒沉降曲线越平缓,各层质量差异性越小,底层质量无明显拐点,不同沉降时间曲线越紧密,则泥浆悬浮砂粒能力越强。     

我国商业银行信息化建设研究综述

我国商业银行信息化建设已走过近20年的路程,在取得巨大业绩的同时也存在若干不足之处．文章在总结我国商业银行信息化建设经验的基础上,对其信息化建设的现状进行了深入的分析,同时指出了我国商业银行信息化建设的总体规划方向,以期大幅度提高我国商业银行的信息化建设绩效。     

公交通行能力约束的智能调度优化模型

公交通行能力是解决城市交通拥堵问题、促进城市公共交通系统高效运行的要素之一。介绍了公交通行能力的计算要素,并针对目前我国城市由于盲目调度造成的公交系统运营效率、服务水平下降的问题,提出将公交通行能力作为约束条件对公交调度进行优化。鉴于公交企业制订调度方案时需兼顾公交服务水平和企业效益,将智能调度的目标确定为候车时间满意度、候车空间满意度、车内舒适满意度和企业满意度加权平均值最大,并给出了相应的计算方法。最后讨论了利用遗传算法对模型进行求解的过程。