Optimal selection of suspension parameters in large scale vehicle models

Optimum values are selected for the suspension damping and stiffness parameters of complex car models, subjected to road excitation, by applying suitable numerical methodologies. These models result from a detailed finite-element discretisation and possess a relatively large number of degrees of freedom. They also involve strongly nonlinear characteristics, due mostly to large rigid body rotation of some of their components and the properties of the connection elements. First, attention is focused on gaining some insight into the dynamics of the mechanical models examined, resulting when the vehicle passes over roads involving typical geometric profiles. Then, the emphasis is shifted to presenting results obtained by applying appropriate optimisation methodologies. For this purpose, three classes of design criteria are first set up, referring to passenger ride comfort, suspension travel and car road holding and yielding the most important suspension stiffness and damping parameters. Originally, the optimisation is performed by forming a composite cost function and employing a single-objective optimisation method. Since the design criteria are conflicting, a multi-objective optimisation methodology is also set up and applied subsequently.     

天然气爆炸对盾构隧道的作用机制及工后修复

为了使爆炸灾害后的盾构管片得到合理的修复方案,以某地铁盾构施工过程中挖破天然气管道导致爆炸事故为背景,通过介绍爆炸的基本特性、冲击波的传播特点及火焰波的伴生关系,归纳在天然气爆炸过程中,爆炸火焰和冲击波是决定事故危害程度的2个主要因素,同时这些因素中最危险、破坏力最强、破坏区域最大的是冲击波的破坏效应。通过计算隧道内满布天然气时的TNT当量,以及采用拟静力法模拟管片内部的超压分布并计算得到管片的变形,与第三方检测数据中的管片变形指标进行耦合,证明模拟的准确性,为提出合理的区间修复方案提供依据,同时也为类似工程事故的处理和预案提供经验。     

Assessment of the volume of fluid method for free-surface wave flow

This study was concerned with the free-surface wave flow around a surface-piercing foil. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code was employed. Three widely used discretization schemes for the volume of fluid method were assessed for a test case that involved general ship waves, spilling breaking waves in front of the leading edge, and bubbly free surfaces in separated regions. A single computational approach was selected for the comparison, and a grid-dependence study was carried out. The computational results were validated against existing experimental data, showing good agreement. The validation results suggest that all three discretization schemes perform well, but the best and most efficient results were obtained using the high-resolution interface capturing scheme.     

Liner ship route schedule design with port time windows

This paper examines a practical tactical liner ship route schedule design problem, which is the determination of the arrival and departure time at each port of call on the ship route. When designing the schedule, the availability of each port in a week, i.e., port time window, is incorporated. As a result, the designed schedule can be applied in practice without or with only minimum revisions. This problem is formulated as a mixed-integer nonlinear nonconvex optimization model. In view of the problem structure, an efficient holistic solution approach is proposed to obtain global optimal solution. The proposed solution method is applied to a trans-Atlantic ship route. The results demonstrate that the port time windows, port handling efficiency, bunker price and unit inventory cost all affect the total cost of a ship route, the optimal number of ships to deploy, and the optimal schedule.     

路网环境下考虑大型车混入率的事故疏散诱导模型

大型车的混入对高速公路交通流产生了较大的影响，尤其是在交通事故情景下。为了引导事故条件下驾驶人和组织者做出高效准确的决断，将考虑了大型车混入率的动态空间占有率模型引入到交通波模型，构建干涉与非干涉情景下的交通事故影响模型。以郑尧高速为例，对模型的准确性和可行性进行了验证，分别对干涉情景下的疏散时间、疏散量以及事故发生的位置，车辆数等指标与事故影响程度的指标（包含事故最远排队长度，事故持续时间）关系进行分析。研究结果表明：疏散时间与事故影响程度成正相关关系，疏散量与事故影响程度成负相关关系，而事故发生点与上游匝道之间的距离与其关系不大；道路服务水平为0.456，车辆数为1 321 veh·h^-1时，为了使得分合流区不受影响，在不采取任何措施的情景下，应将大型车混入率控制在50.1%以下，使得最远排队长度在10 km内；当大型车混入率大于58%时，将很难通过干涉引导避免对上游分合流区产生影响；在35 min以内采取干涉措施的效果最为明显，而大于35 min时，事故持续时间会发生一个急剧的增加，不利于路网恢复，之后事故恢复时间将趋于平稳；对道路交通量进行模拟可知交通量每增加50 veh，疏散时间和距离增加的范围为[1.5 min，3.6 min]和[1.209 km，1.543 km]。研究结果可为高速公路事故诱导策略制定和疏散效果提升提供参考。     

隧道下穿运营机场跑道的爆破振动安全判据研究

以我国第一座采用钻爆法下穿运营机场跑道的隧道恩施金凤大道许家坪隧道工程为依托,开展对机场跑道的爆破动力安全判据的研究。首先基于应力波传播理论及极限拉应力准则,对爆炸应力波传播至机场跑道上表面(即自由面)处发生的反射进行理论分析,建立基于混凝土跑道结构安全的爆破振动速度判据模型,并提出跑道的爆破振动速度安全阈值;同时,基于数值模拟,从统计角度建立拉应力峰值与质点振动速度峰值之间的函数关系,求解得到机场跑道的爆破振动速度安全阈值。最后,将理论分析结果、数值计算分析与《爆破安全规程》进行对比分析,最终确定机场跑道的爆破振动速度安全判据,为在隧道下穿机场跑道爆破施工提供了依据。     

Investigation of ship waves in a narrow channel

This paper presents a discussion of the characteristics of ship waves in a narrow channel restricted by vertical walls, based on observed data and the results computed by a 2-D model. In the numerical model, the propagation of waves generated by a moving ship is simulated by solving 2-D depth-integrated Boussinesq equations. To get the boundary conditions at the location of the ship, the slender-ship approximation is employed. A field observation was carried out at a straight length of navigation channel. The ships targeted in the observations are two kinds of waterbuses with lengths of 28 and 24 m. The relative depth Froude number for the river current, an appropriate parameter for assessing the influence of the current on ship wave characteristics in a navigation channel, ranged from 0.47 to 0.76. The observed maximum wave height varied between 0.13 and 1.26 m. The maximum wave height of the wave train is sharply increased when the relative depth Froude number exceeds 0.6. The results computed by the present model agree fairly well with the observed data.     

欺骗干扰机载预警雷达的辅助决策研究

针对欺骗干扰装有副瓣对消系统的机载预警雷达,分别给出了干扰站一线配置时欺骗干扰信号从雷达主瓣、副瓣进入的兵力部署和兵力需求优化决策方法,推导了在一定战术要求下的指挥辅助决策计算公式。     

浅谈青岛港集装箱码头轮胎吊自动纠偏技术

为了提高效益,确保安全,青岛港集装箱码头进行了轮胎吊大车行走纠偏技术攻关,对几种自动纠偏方式进行了分析比较,选择超声波技术作为最佳方案。具体介绍了超声波技术方案的实施步骤及出现的几种工况,该方案取得了良好的效果。     

船舶主机数字调速仿真训练器的研制

为了研究船舶主机调速系统的特性和控制算法,将船舶主机调速系统的性能要求转化为复合PID控制算法的问题,研制基于Nabtesco MG-800Ⅲ的数字调速仿真器。非线性PID实现主机转速控制,其比例增益、微分增益和积分增益分别是控制偏差的非线性函数。模糊自整定PID实现主机油门的位置控制,其PID的3个参数随着偏差和偏差变化速度,根据模糊控制原理进行在线修改。物理仿真结果表明,数字调速器的非线性模糊自适应PID算法能提高调速系统的动态精度和抑制扰动的能力。