Non-stationary random vibration analysis of three-dimensional train–bridge systems

The quarter car model has been used extensively to study the benefits of active, semi-active and passive suspensions. Despite the evident simplicity of the model, the insights obtained from this model have been found to have counterparts in half- and full-car suspension models. Among the most interesting results of the analysis of the quarter car are the relationships among certain transfer function and invariant points in the frequency response functions. These results are of great interest for the application of linear control techniques to the design of active suspensions and the optimisation of linearised passive suspensions. This paper attempts to show why some of the limitations implied by the model are less absolute than they at first seem.     

A closed-loop dynamic simulation-based design method for articulated heavy vehicles with active trailer steering systems

This paper presents a closed-loop dynamic simulation-based design method for articulated heavy vehicles (AHVs) with active trailer steering (ATS) systems. AHVs have poor manoeuvrability at low speeds and exhibit low lateral stability at high speeds. From the design point of view, there exists a trade-off relationship between AHVs’ manoeuvrability and stability. For example, fewer articulation points and longer wheelbases will improve high-speed lateral stability, but they will degrade low-speed manoeuvrability. To tackle this conflicting design problem, a systematic method is proposed for the design of AHVs with ATS systems. In order to evaluate vehicle performance measures under a well-defined testing manoeuvre, a driver model is introduced and it ‘drivers’ the vehicle model to follow a prescribed route at a given speed. Considering the interactions between the mechanical trailer and the ATS system, the proposed design method simultaneously optimises the active design variables of the controllers and passive design variables of the trailer in a single design loop (SDL). Through the design optimisation of an ATS system for an AHV with a truck and a drawbar trailer combination, this SDL method is compared against a published two design loop method. The benchmark investigation shows that the former can determine better trade-off design solutions than those derived by the latter. This SDL method provides an effective approach to automatically implement the design synthesis of AHVs with ATS systems.     

基于多电平变频器的有源电力滤波器

含独立电源的级联H桥多电平变频器具有每个H桥单元结构相同、易于实现模块化设计等优点，因而在无功补偿和有源电力滤波器等领域有广泛的应用前景。在并联有源电力滤波器（APF）系统中，由于直流侧不需要提供有功功率，可充分利用级联多电平变频器的优势及载波相移PWM技术良好的谐波传输特性。提出了一种基于多电平变流器的并联APF系统的电路拓扑结构，并在交直流控制策略和系统参数设计方面进行了分析。仿真和实验结果表明，此系统动态响应速度快、补偿性能良好，验证了理论分析的正确性和实验系统的可行性。     

牵引供电系统混合有源电力滤波器的仿真研究

为了抑制电气化铁道产生的谐波污染,本文采用了一种新型混合有源电力滤波器的拓扑结构,并分析了这种新型拓扑结构的工作原理及滤波特性.通过MATLAB仿真,验证了新型混合有源电力滤波器的滤波特性.仿真结果表明这种新型混合有源电力滤波器具有优良的滤波性能.     

京沪线南翔牵引变电所有源无源混合补偿方案

介绍了采用低压侧两相式有源与无源混合补偿方案，可以有效降低补偿装置的补偿容量，减小补偿装置的体积，并将该方案实际应用于工程实践，仿真结果验证了补偿方案的正确性与有效性，该装置已投入运行，为新补偿方案在国内推广应用奠定了基础。     

岩溶区不同含水率破碎围岩地质雷达波形特征研究

为研究岩溶区裂隙块状结构破碎灰岩在不同含水率时的地质雷达波形特征,以广西六寨至宜州高速公路40座公路隧道为依托,进行大量现场实测.对裂隙块状结构破碎灰岩的实测数据进行筛选,并基于被选数据,采用SIR-3000地质雷达RADAN后处理软件分析不同含水率情况下的线测、点测反射强弱定性特征,同时采用对MATLAB分析软件进行数据接口语言汇编的方法,研究不同含水率情况下回波中心频率值及其分布范围,结果表明:当含水率分别小于26％、介于26％ ～42％和大于42％时,线测、点测反射强弱变化较大,回波中心频率以低频为主,分别在85,80 MHz和53 MHz附近波动,且分布范围依次减小,分别为21～105 MHz,12.5 ～ 102 MHz和11 ～ 77 MHz.     

基于量子技术的目标探测研究

通过模拟人类视觉成像原理,将量子探测方法与技术,用于雷达探测,提出了量子雷达的概念。特别是提出利用激光的原理,用于雷达信号的接收与识别。量子雷达不仅克服了现有雷达功耗大,抗干扰性能差的弱点,而且探测距离更大,分辨率高且便于成像。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

基于模糊综合函数的飞行计划与雷达航迹关联

文章针对飞行计划航迹准确推算的困难和传统飞行计划关联算法的缺陷,利用飞行计划、起飞报、位置报等报文较为准确的推算出计划航迹,并根据关联特点,运用模糊综合函数航迹关联算法的思想,建立了仿真模型,解决了关联问题。仿真结果验证了该算法的科学性、可行性。     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.