城市轨道交通车辆受电弓弓头安全宽度的计算

分析了城市轨道交通车辆在直线段和曲线段中受电弓弓头的偏移影响因素以及接触线的受风偏移现象.根据比较车辆处于直线段和曲线段时的受电弓与接触线之间相对距离来确定受电弓弓头宽度的合理安全宽度,并设计了“城市轨道交通车辆受电弓宽度参数计算软件”.     

快速脱缆应用技术

针对快速脱缆钩存在的钩体使用角度超范围和单钩承受拉力超安全工作负荷的设计问题,对快速脱缆钩如何保证船舶系泊安全进行研究。从船舶系缆方式、码头靠泊船舶吨级、新旧码头依据规范内容3个方面分析快速脱缆钩使用角度超范围的原因,从风力和涌浪作用及船舶装卸和涨落潮作用2个方面分析快速脱缆钩单钩拉力超负荷的原因,提出加强快速脱缆钩使用管理、升级更新快速脱缆钩、定期检测和设置码头导缆孔的解决问题方法。     

Dynamic stride length adaptation according to utility and personal space

Pedestrians adjust both speed and stride length when they navigate difficult situations such as tight corners or dense crowds. They try to avoid collisions and to preserve their personal space. State-of-the-art pedestrian motion models automatically reduce speed in dense crowds simply because there is no space where the pedestrians could go. The stride length and its correct adaptation, however, are rarely considered. This leads to artefacts that impact macroscopic observation parameters such as densities in front of bottlenecks and, through this, flow. Hence modelling stride adaptation is important to increase the predictive power of pedestrian models. To achieve this we reformulate the problem as an optimisation problem on a disk around the pedestrian. Each pedestrian seeks the position that is most attractive in a sense of balanced goals between the search for targets, the need for individual space and the need to keep a distance from obstacles. The need for space is modelled according to findings from psychology defining zones around a person that, when invaded, cause unease. The result is a fully automatic adjustment that allows calibration through meaningful social parameters and that gives visually natural results with an excellent fit to measured experimental data.     

多车道高速公路出口开口段安全特性分析

为研究不同断面形式下的多车道高速公路出口影响区开口长度及流量与交通安全的关系，针对2种断面形式的高速公路出口，分别设计了3种不同的开口长度，结合3种不同流量条件设计了18个不同的驾驶模拟场景。实验招募30名被试者开展模拟驾驶实验，提取不同开口长度及流量条件下各断面形式高速公路出口的车辆行驶轨迹、换道间隙的选择、减速度、最小 TTC (Time to Collision)等驾驶行为特性参数，综合分析基于驾驶行为数据对不同开口长度的行车风险。结果表明：两种断面形式下，开口长度对于车辆在开口段上的换道点选择存在显著影响；两种断面形式下，1500 m的开口长度能够满足绝大多数驾驶人的换道需求；在换道间隙选择中，大都集中在5~6 s，分离式断面下的开口长度对于低于临界间隙的换道间隙出现的频次具有显著影响；流量及开口长度对于最大减速度及TTC最小值和分布位置均不存在显著性影响，但分离式断面下的最大减速度和最小TTC相较于整体式断面更小；此外，整体式断面中内侧3车道的行车风险低于分离式断面，分离式断面中外侧车道的行车风险低于整体式断面。     

路侧公交专用车道模式下右转交织长度建模

在设置路侧公交专用道的交叉口处,可通过划定交织区的方式允许右转车辆借用一定长度的公交专用道通行.合理规划公交车与右转车的交织区长度有利于提高借道右转的通行效率,减少在交织区前的排队车辆数从而降低道路混乱程度,保障公交车的专用路权.本文分析了公交站点影响下的公交车车头时距分布,建立了右转车穿越交织区长度计算模型,并结合实际调查数据进行了算例分析和模型验证.研究成果可为公交优先条件下的交叉口空间优化设计提供理论参考.     

基于计算机自动控制技术的多探头测深系统研制与改造

通过加装控制盒的方式,实现单探头测深仪与自动控制探头之间的流畅切换,将传统单探头测深仪改造成具有多探头功能的高效水下测量仪器系统,主要用于航道和码头基床等的水下扫测。利用该系统进行的码头基床扫测已经取得成功,可为同类测量设备的改造提供全新的思路。     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

带卸荷板的方块码头墙身位移对墙后土压力的影响

土压力与挡土墙体的位移密切相关,现行规范中采用主动土压力理论计算带卸荷板的方块码头墙后土压力是不完全准确的。根据此类码头结构特点,对地基条件好、基床厚度薄的方块码头墙身位移特性进行论述,对规范方法提出修正意见。依托于某工程实例,采用数值分析方法对码头墙身位移和墙后土压力进行模拟,并与规范公式计算结果进行对比,得出墙底处修正系数可取1.84,卸荷板处可取1.34,可为类似特点的工程土压力计算提供参考。     

高桩码头施工对内河航道通航安全的影响

针对高桩码头施工对内河航道通航安全的影响问题,以江苏响水高桩码头工程为依托,结合工程所在水域的通航情况,分析探讨高桩码头在挖泥、打桩、预制构件吊装施工期间相应施工船舶占用水域情况。根据内河航道的船舶流量分析,提出相应的航道通航安全保证措施,确保内河航道在高桩码头施工期间航道的通畅与通航安全。     

无梁板式高桩码头温度效应分析

气温的年变化会引起结构内温度的均匀变化,从而使得结构内部产生变形和内力,在高桩码头工程中温度作用往往会引起不利影响。为了研究无梁板式高桩码头的温度效应,基于无限板的热传导规律,以工程实例为依托,利用有限元软件ABAQUS建立三维模型。结合杭州地区的逐时气象资料,研究了气温变化特征、面板温差场以及结构变形与位移的变化规律,并对基本气温的选取进行讨论。结果表明:气温在无梁面板中呈现以厚度方向为主的一维传热特征,温度场在水平向分布均匀;气温年变幅在面板内几无衰减,日变幅对面板温度影响不可忽略;面板的整体温差与竣工时气温和年平均气温差,以及年变幅、日变幅的衰减值有关;无梁板码头基桩的温度响应受面板的整体温差控制,两者瞬时同步变化。