迎浪规则波中小水线面双体船纵向运动及波浪载荷非线性特性数值分析

基于RANS方程和VOF模型求解船体粘性兴波流场,开展了小水线面双体船(Small Waterplane Area Twin Hulls,SWATH)迎浪规则波中纵向运动及波浪载荷的非线性特性研究.通过数值计算结果与模型试验结果的对比分析,验证了文中方法的有效性;在此基础上,较为系统地分析了SWATH船的垂荡及纵摇运动响应、垂向加速度和波浪载荷的一阶及二阶量随入射波高的变化规律,指出SWATH船的运动响应及载荷与波高存在非线性的关系,尤其体现在响应共振区附近;相比于船体垂荡和纵摇运动,垂向加速度及波浪载荷的非线性特性更为显著.     

Changes in fuel economy: An analysis of the Spanish car market

This paper estimates the role that technological change and car characteristics have played in the rate of fuel consumption of vehicles over time. Using data from the Spanish car market from 1988 to 2013, we estimate a reduced form equation that relates fuel consumption with a set of car characteristics. The results for the sales-weighted sample of vehicles show that energy efficiency would have improved by 30% and 42% for petrol and diesel cars respectively had car characteristics been held constant at 1988 values. However, the shift to bigger and more fuel-consuming cars reduced the gains from technological progress. Additionally, using the results of the fuel equation we show that, besides a natural growth rate of 1.1%, technological progress is affected by both the international price of oil and the adoption of mandatory emission standards. Moreover, according to our estimations, a 1% growth in GDP would modify car characteristics in such a way that fuel consumption would increase by around 0.23% for petrol cars and 0.35% for diesel cars.     

海流能轮机叶片翼型的水动力学特性模拟

基于卧式海流能发电装置,采用雷诺平均N-S方程,对来流攻角从0°~26°情形下的叶片翼型进行数值模拟,分析比较不同攻角下水动力学特性的变化规律。结果表明:一定范围内增加攻角可有效提高升阻比,但升力系数最大时,升阻比、水翼捕能效率不一定最高,失速角也不一定是最佳攻角,验证了水翼失速的根本原因是边界层的分离;水翼吸力面与压力面的压差较大,此压差为水翼提供较高的升力系数,主要来自于水翼的前半部。此外,还分析了水翼周围流场的速度分布、压力分布等水动力特性与攻角的关系,为设计高效的海流能转换叶片提供了理论参考。     

基于碳化硅器件的高频化高效率船用变频器

碳化硅器件的应用能够显著减小电力电子变换器的重量、体积、成本,大幅提升电力电子系统的性能。本文基于碳化硅器件的高频化高效率船用变频器设计,采用电压源型双PWM交-直-交变频器系统拓扑结构,前级整流部分和后级逆变均使用最新一代碳化硅器件,提出有源前端(AFE)变频器系统拓扑结构、整流与逆变系统控制策略,以及主电路参数计算方法。系统仿真和试验结果表明,该设计方式是实现船用变频器高性能、小型化的有效技术途径。     

Driving cycle prediction model based on bus route features

Bus fuel economy is deeply influenced by the driving cycles, which vary for different route conditions. Buses optimized for a standard driving cycle are not necessarily suitable for actual driving conditions, and, therefore, it is critical to predict the driving cycles based on the route conditions. To conveniently predict representative driving cycles of special bus routes, this paper proposed a prediction model based on bus route features, which supports bus optimization. The relations between 27 inter-station characteristics and bus fuel economy were analyzed. According to the analysis, five inter-station route characteristics were abstracted to represent the bus route features, and four inter-station driving characteristics were abstracted to represent the driving cycle features between bus stations. Inter-station driving characteristic equations were established based on the multiple linear regression, reflecting the linear relationships between the five inter-station route characteristics and the four inter-station driving characteristics. Using kinematic segment classification, a basic driving cycle database was established, including 4704 different transmission matrices. Based on the inter-station driving characteristic equations and the basic driving cycle database, the driving cycle prediction model was developed, generating drive cycles by the iterative Markov chain for the assigned bus lines. The model was finally validated by more than 2 years of acquired data. The experimental results show that the predicted driving cycle is consistent with the historical average velocity profile, and the prediction similarity is 78.69%. The proposed model can be an effective way for the driving cycle prediction of bus routes.     

散杂码头设计中节能增效措施的应用

针对码头工程中如何多方位将节能增效措施融入到设计中的问题,以长江江苏段某散杂码头及其堆场的设计为例,在工艺、结构、电气等方面采用多方位比较的方法,工艺采用装船机、取料机和皮带机变频联动系统、旋转式过渡皮带车以及三工位头部伸缩装置等措施,结构方面陆域轨道基础采用新型专利,电气方面采用风光互补路灯及岸电系统等不同的节能增效措施,使项目更经济合理、效益显著。     

上游静止柱体对圆柱体结构尾激振动的影响

文章运用半隐式特征线分裂算子有限元算法对串列布置的静止上游柱体和下游圆柱的尾激振动问题进行了数值模拟研究。数值结果表明:上游柱体结构的形状、尺寸比(d/D)和折减速度(Ur)三个参数对下游圆柱体结构的动力响应、运动轨迹与涡脱落模态有着显著的影响,且与单圆柱工况相比存在明显区别;随着尺寸比的增大,上/下游柱体结构之间的互扰作用会由流致效应逐渐转变为尾流效应,使得频率特性发生变化,并会导致下游圆柱体结构的振动响应增强;当d/D=0.5和1.0时,下游圆柱体结构的运动轨迹主要为“8”字形;当d/D=1.5时,除了“8”字形外,运动轨迹还会呈现双弯刀形、“双8”字形和不规则形状。通过对流体力系数与位移时程曲线及位移PSD曲线特性进行分析,揭示了其相互作用的内在机理。另外,下游圆柱体结构的尾流场特性也会随参数的变化而变化,其涡脱落模态主要为2S、P+S和2P三种。     

海上风机支撑结构的时域和频域疲劳对比研究

对海上风机支撑结构进行动力响应分析,求出结构危险节点的载荷谱和功率谱密度函数,结合疲劳损伤模型和Dirlik概率模型,分别在时域和频域内对支撑结构进行疲劳寿命分析.由于时域法计算疲劳寿命需进行应力循环计数,这一过程需处理的数据庞大,耗时长.频域法省去应力循环计数,代之以概率密度函数,可相对准确、快速地计算结构的疲劳寿命.分析结果表明,采用Dirlik概率模型的频域分析法能较准确地反映海上风机支撑结构在随机载荷作用下的疲劳损伤情况,计算结果误差在可接受范围内.     

基于概率密度演化的斜拉索多级变幅时变疲劳可靠度分析

拉索是斜拉桥的主要受力构件,在车辆、风等交变荷载作用下易发生多级变幅疲劳损伤,而经典可靠度方法预测多级变幅时变疲劳可靠度难度大且计算效率低。针对这一问题,提出一种高效的多级变幅斜拉索时变疲劳可靠度预测方法。基于Miner累积损伤理论,建立同时考虑荷载和材料随机性的变幅疲劳损伤概率演化模型;构建应力幅出现频率指标,解决多级变幅疲劳损伤演化过程中偏微分方程难以确定问题,通过概率密度演化方法精确计算多级变幅时变疲劳可靠度,并采用五级变幅材料试验数据和某桥梁斜拉索的模拟数据验证所提方法的可行性。结果表明:所提方法的计算效率远高于蒙特卡洛方法;在小概率失效时,其计算精度高于蒙特卡洛方法。     

基于KENTRACK的铁路沥青混凝土底砟层疲劳特性评价

重复动载疲劳损伤是沥青混凝土底砟层的破坏形式之一。本文建立了沥青混凝土底砟层的三维有限元分析模型,分析其在列车荷载作用下的受力变形特性。采用KENTRACK设计方法分析了沥青混凝土底砟层的疲劳寿命。结果表明:沥青混凝土底砟层等厚度替代基床表层的路基结构形式在列车荷载作用下基床表层的竖向动变形和振动加速度明显减小;沥青混凝土底砟层的层底拉应变在10×10^-6~90×10^-6,处于较低水平;沥青混凝土底砟层具有良好的疲劳耐久性,可用于工程实践。