Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

柴油闪急沸腾喷雾的试验研究

通过对柴油机高压油管进行外加热源加热热，在Ｅ１５０柴油机上实现柴油的闪急沸腾喷雾，并对柴油机的性能及排放进行了试验研究。结果表明，采用闪急沸腾喷雾，柴油机油耗可降低８ｇ／ｋＷ．Ｈ，烟度下降０．４ＢＳＵ，ＮＯＸ排放略有升高，ＣＯ，ＨＣ排放均降低。     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

同步发电机参数辨识的相关方法探讨

随着电网安全及稳定运行问题的重要性日益突出,基于获得准确的系统模型和参数辨识方法,优化同步发电机相关参数将是十分有意义的。本文针对当今几种比较典型的参数辨识方法做了系统的介绍,通过比较得出何种方法对于同步电机的参数辨识是最适合的。     

盐渍土地基处理的浸水试验研究

盐渍土作为一种不良土体,由于它的盐溶特性严重影响置于其上的建筑物。采用何种有效的处理方法来降低溶陷沉降量将至关重要。文中以西北某盐渍土机场的地基处理为例,采用浸水预溶的处理方法,在现场分别进行了深层浸水试验、直接浸水试验、浸水后晾晒试验,并对施工工艺、浸水控制、渗水速度确定做了研究。通过试验后检测,浸水预溶试验取得了良好的效果,为指导大面积地基处理施工提供了可靠参数。     

基于虚交偏角法的圆曲线特殊情况的测设

通过对多种圆曲线（包含缓和曲线）测设方法的比较，提出用虚变偏角法配合自行编制的CASIO-fx4500pA计算器程序来解决测设圆曲线特殊情况的方法，与传统的测设方法相比，可取得更高的精度。     

港口腹地划分的两种新方法探讨--以大连国际航运中心为例

引入经济地理学的新理论成果———圈层结构法和点轴法,提出了圈层结构划分法和点轴结构划分法两种新的港口腹地划分方法,并应用这两种新方法对大连国际航运中心港口腹地范围的界定与划分进行实例分析。与以往的行政区划法、经济区域法等港口腹地划分方法相比,这两种方法更加注重对港口原有腹地的细分,更接近于港口腹地的实际状况,进而有利于港口企业的经营发展。     

组合结构力法分析

本文应用集合概念，对组合结构作了形式化描述。通过矩阵分析，导出了力法方程的统一列式。给出了算法实施的流程框图和具体算例。