集装箱专用平车加装承载板实现滚装运输技术研究

为弥补应急情况下滚装运输所需平车数量缺口,同时为完善车辆自身应急保障能力,分析集装箱专用平车用于滚装运输需求,针对集装箱专用平车用于滚装运输存在的主要问题,提出在不改变车体结构前提下,通过加装承载板实现滚装运输的解决思路。结合集装箱专用平车结构特点,分析承载板的数量、尺寸、材质,设计承载板由承载面、横支撑架、渡板、斜支腿、受力面、绳拴构成,给出加装改造方法,并通过校核承载能力和研究适运范围,研究加装改造后的集装箱专用平车滚装运输能力,得出改造后的集装箱专用平车可以满足大部分滚装运输货物运输需要。     

基于信令数据的出行强度影响因素分析模型

为探究城市交通出行强度影响因素及不同因素的影响程度，本文从土地利用与交通基础设施建设两方面出发，分析包括土地利用混合指数，职住混合率熵指数，公共交通站点 500 m覆盖率，路网可达性等17个指标与出行强度的相关关系；基于相关系数和拟合优度分析，提取7个与出行强度强相关指标，基于所识别指标构建北京市中心城区出行强度多元回归模型.模型结果表明，职住混合率熵指数对出行强度的影响最为显著，公共交通站点覆盖率对出行强度的影响比道路网密度和可达性更为明显.此外，给出单一土地利用/交通基础设施指标对出行强度拟合结果的离群特征分析方法，用于评估不同区域基础设施供给与交通出行需求之间的平衡关系.     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

车路协同下考虑绿波协调的公交优先控制

在绿波协调控制交叉口群中,为分析公交优先控制对后续交叉口群的扰动,基于车流运行时间偏移分布,以概率期望描述了交叉口各相位绿时左端和右端时长变化引起的后续交叉口群在绿波带内、绿波带间的延误变化;采用组合优化的方法,以交叉口群在车速引导下的公交通行效益优化为上层模型,以交叉口群在公交优先控制下的延误优化为下层模型,对公交引导车速和信号控制参数进行协同优化.通过算例分析表明,公交优先控制模型有效提升了交叉口整体通行效益,最大化减小了对周边交叉口群的不利影响.     

提高八钢专用铁路货运量的对策

优化调整货物运输结构、提高铁路发运占比是落实"蓝天保卫战"的一项具体举措。为了满足宝钢集团新疆八一钢铁有限公司生产规模的不断扩大、外运需求旺盛的实际,在对其铁路运输现状和需求,以及存在的线路质量较差、装卸效率较低、运输组织衔接弱等问题进行剖析的基础上,提出提高铁路货运量对策,即:推进路企直通战略合作、升级改造设备设施、构建调度全程统一指挥模式、优化货流源头组织,以加快调整运输结构,增加铁路货运量,推动铁路高质量发展。     

基于超融合基础架构的铁路云数据中心建设方案

在充分研究铁路信息化发展现状、演进困境以及云计算平台技术的基础上,结合中国国家铁路集团有限公司对于信息化的总体规划,提出铁路云数据中心的总体技术架构,详细阐述基于云计算技术的铁路数据中心平台优势。对涉及到的关键技术:超融合技术和网络拓扑技术展开说明。立足铁路云数据中心规划建设角度,重点从IaaS层资源规划、云管平台建设、网络架构设计和云平台双活灾备建设4个方面进行详细论述。为铁路云数据中心规划、设计、建设提供理论基础和技术支撑,也为后续工程现场实施提供重要的建设思路支撑和实验室数据支撑。     

Heterogeneous hazard model of PEV users charging intervals: Analysis of four year charging transactions data

Public charging infrastructure represents a key success factor in the promotion of plug-in electric vehicles (PEV). Given that a large initial investment is required for the widespread adoption of PEV, many studies have addressed the location choice problem for charging infrastructure using a priori simple assumptions. Ideally, however, identifying optimal locations of charging stations necessitates an understanding of charging behavior. Limited market penetration of PEV makes it difficult to grasp any regularities in charging behavior. Using a Dutch data set about four-years of charging transactions, this study presents a detailed analysis of inter-charging times. Recognizing that PEV users may exhibit different charging behavior, this study estimates a latent class hazard duration model, which accommodates duration dependence, unobserved heterogeneity and the effects of time-varying covariates. PEV users are endogenously classified into regular and random users by treating charging regularity as a latent variable. The paper provides valuable insights into the dynamics of charging behavior at public charging stations, and which strategies can be successfully used to improve the performance of public charging infrastructure.     

Predicting market potential and environmental benefits of deploying electric taxis in Nanjing,China

This paper investigates the market potential and environmental benefits of replacing internal combustion engine (ICE) vehicles with battery electric vehicles (BEVs) in the taxi fleet in Nanjing, China. Vehicle trajectory data collected by onboard global positioning system (GPS) units are used to study the travel patterns of taxis. The impacts of charger power, charging infrastructure coverage, and taxi apps on the feasibility of electric taxis are quantified, considering taxi drivers’ recharging behavior and operating activities. It is found that (1) depending on the charger power and coverage, 19% (with AC Level 2 chargers and 20% charger network coverage) to 56% (with DC chargers and 100% charger network coverage) of the ICE vehicles can be replaced by electric taxis without driving pattern changes; (2) by using taxi apps to find nearby passengers and charging stations, drivers could utilize the empty cruising time to charge the battery, which may increase the acceptance of BEVs by up to 82.6% compared to the scenario without taxi apps; and (3) tailpipe emissions in urban areas could be significantly reduced with taxi electrification: a mixed taxi fleet with 46% compressed-natural-gas-powered (CNG) and 54% electricity-powered vehicles can reduce the tailpipe emissions by 48% in comparison with the fleet of 100% CNG taxis.     

Integrating mesoscopic dynamic traffic assignment with agent-based travel behavior models for cumulative land development impact analysis

A number of approaches have been developed to evaluate the impact of land development on transportation infrastructure. While traditional approaches are either limited to static modeling of traffic performance or lack a strong travel behavior foundation, today’s advanced computational technology makes it feasible to model an individual traveler’s response to land development. This study integrates dynamic traffic assignment (DTA) with a positive agent-based microsimulation travel behavior model for cumulative land development impact studies. The integrated model not only enhances the behavioral implementation of DTA, but also captures traffic dynamics. It provides an advanced yet practical approach to understanding the impact of a single or series of land development projects on an individual driver’s behavior, as well as the aggregated impacts on the demand pattern and time-dependent traffic conditions. A simulation-based optimization (SBO) approach is proposed for the calibration of the modeling system. The SBO calibration approach enhances the transferability of this integrated model to other study areas. Using a case study that focuses on the cumulative land development impact along a congested corridor in Maryland, various regional and local travel behavior changes are discussed to show the capability of this tool for behavior side estimations and the corresponding traffic impacts.     

The vulnerability of the environment to spills of dangerous substances on highways: A diagnosis based on multi criteria modeling

Highways and freeways are the main infrastructure channel used to transport cargo in Brazil. This cargo often includes dangerous chemical products which can, in the event of an accident, negatively impact the environment. The development and implementation of tools for the rapid diagnosis of environmental vulnerability in the transportation of dangerous goods has been studied. However, for highways and freeways there is a lack of studies based on environmental attributes, and not just based on statistical data which demands a specific period for collection and analysis and only after that the implementation of preventive measures. Thus, evaluation grounded on multiple criteria embedded in Geographic Information System (GIS) has significant potential for the practical implementation of risk management of road transportation of dangerous goods. This study has determined the environmental vulnerability of route BR 050, specifically the segment between the cities of Uberlândia and Uberaba in the state of Minas Gerais, where multi criteria analysis has been efficient in determining the most vulnerable areas. The main attributes analyzed were the drainage density, soil type and geology, determining that in case of an accident with dangerous substances the regional environment would be immediately affected, and so endorsing the use of this tool in many segments involved in environmental management of highway enterprises.