直升机舰上起降安全的影响因素研究

舰载直升机的起降安全涉及到舰机两方面,且影响因素较多。本文首先对舰载直升机起降安全因素进行了系统分析,梳理了其关键影响因素舰船空气流场中各特性参数对直升机操作性能的影响。然后介绍了用于舰船空气流场测量的三种典型方法,对舰船空气流场的深入研究有重要指导意义,并可为机舰动态配合研究提供参考。     

Tyre/road noise damping characteristics using nomographs and fundamental vibroacoustical relationships

Several studies have successfully developed laboratory and field measurement techniques to estimate tyre/road noise damping characteristics. However, laboratory–field noise correlations of pavement types in the form of nomographs is essential to cognize the pavements’ acoustical properties from a practical perspective. A toolkit that readily provides field tyre/road noise intensity of different pavement materials is needed. Thus, the main objective of this study was to develop nomographs with relationships for tyre/road noise versus pavement materials’ viscoelastic–vibroacoustical properties. Isothermal and isochronal nomographs of phase angle–tyre/road noise as toolkits were developed based upon well-established phase angle and noise intensities typical of mixtures, making the nomograph correlations very authentic, realistic, and novel along with benefit to predict tyre/road noise at any desired temperature and traffic speed (or frequency) combination. This study is envisaged to benefit in the discernment of road materials’ damping capabilities from vibroacoustical and field noise–viscoelastic relation aspects.     

Emission rates of intermodal rail/road and road-only transportation in Europe: A comprehensive simulation study

Intermodal rail/road transportation combines advantages of both modes of transport and is often seen as an effective approach for reducing the environmental impact of freight transportation. This is because it is often expected that rail transportation emits less greenhouse gases than road transportation. However, the actual emissions of both modes of transport depend on various factors like vehicle type, traction type, fuel emission factors, payload utilization, slope profile or traffic conditions. Still, comprehensive experimental results for estimating emission rates from heavy and voluminous goods in large-scale transportation systems are hardly available so far. This study describes an intermodal rail/road network model that covers the majority of European countries. Using this network model, we estimate emission rates with a mesoscopic model within and between the considered countries by conducting a large-scale simulation of road-only transports and intermodal transports. We show that there are high variations of emission rates for both road-only transportation and intermodal rail/road transportation over the different transport relations in Europe. We found that intermodal routing is more eco-friendly than road-only routing for more than 90% of the simulated shipments. Again, this value varies strongly among country pairs.     

Dynamic demand estimation and prediction for traffic urban networks adopting new data sources

Nowadays, new mobility information can be derived from advanced traffic surveillance systems that collect updated traffic measurements, both in fixed locations and over specific corridors or paths. Such recent technological developments point to challenging and promising opportunities that academics and practitioners have only partially explored so far.The paper looks at some of these opportunities within the Dynamic Demand Estimation problem (DDEP). At first, data heterogeneity, accounting for different sets of data providing a wide spatial coverage, has been investigated for the benefit of off-line demand estimation. In an attempt to mimic the current urban networks monitoring, examples of complex real case applications are being reported where route travel times and route choice probabilities from probe vehicles are exploited together with common link traffic measurements.Subsequently, on-line detection of non-recurrent conditions is being recorded, adopting a sequential approach based on an extension of the Kalman Filter theory called Local Ensemble Transformed Kalman Filter (LETKF).Both the off-line and the on-line investigations adopt a simulation approach capable of capturing the highly nonlinear dependence between the travel demand and the traffic measurements through the use of dynamic traffic assignment models. Consequently, the possibility of using collected traffic information is enhanced, thus overcoming most of the limitations of current DDEP approaches found in the literature.     

Dynamic activity-travel assignment in multi-state supernetworks

The integration of activity-based modeling and dynamic traffic assignment for travel demand analysis has recently attracted ever-increasing attention. However, related studies have limitations either on the integration structure or the number of choice facets being captured. This paper proposes a formulation of dynamic activity-travel assignment (DATA) in the framework of multi-state supernetworks, in which any path through a personalized supernetwork represents a particular activity-travel pattern (ATP) at a high level of spatial and temporal detail. DATA is formulated as a discrete-time dynamic user equilibrium (DUE) problem, which is reformulated as an equivalent variational inequality (VI) problem. A generalized dynamic link disutility function is established with the accommodation of different characteristics of the links in the supernetworks. Flow constraints and non-uniqueness of equilibria are also investigated. In the proposed formulation, the choices of departure time, route, mode, activity sequence, activity and parking location are all unified into one time-dependent ATP choice. As a result, the interdependences among all these choice facets can be readily captured. A solution algorithm based on the route-swapping mechanism is adopted to find the user equilibrium. A numerical example with simulated scenarios is provided to demonstrate the advantages of the proposed approach.     

表面强化后的柴油机汽缸套/活塞环配副性试验分析

为提高柴油机汽缸套/活塞环摩擦副的耐磨减摩性能,延长其使用寿命,文中对经表面强化后的汽缸套、活塞环进行配副,组成9对摩擦副,通过试验,分析比较各摩擦副的摩擦系数、磨痕宽度、失重3个参数,得出最佳配副性组合为:气环镀CrTiAlN/缸套激光淬火+渗硫.     

R407C在客车空调中的应用技术

介绍R407C与R134a理论热力循环计算方法;对R407C客车空调系统性能的变化、零部件和材料的选用进行技术分析;为R407C客车空调器的研发设计提供参考。     

基于Isight和AMESim的液压减振器关键参数集成优化

在AMESim中搭建了某乘用车前悬架双筒充气式液压减振器的仿真模型。以 Isight 为平台集成AMESim,对减振器模型参数进行DOE分析,提取对减振器性能影响较大的参数,作为优化的设计变量。利用Isight中的Pointer智能求解器进行优化。结果表明,经过集成优化后的减振器阻尼力曲线与目标曲线吻合较好,符合工程实际的需要。与传统方法相比,该方法缩短了时间,提高了设计效率,可用于指导减振器阀系参数的设计与性能预测。     

基于 M/G/1模型的停车场出口排队延误

通过对大型停车场高峰时段出口车辆行驶特性的调查研究,选取了车辆排队的出口车头时距以及出口服务时间两个指标。基于两个指标实测特性和 M/G/1排队模型的分析,计算了停车场出口理论平均排队时间。通过实测车辆平均排队时间,对理论模型计算的平均排队时间进行了修正。实例分析表明：排队时间修正模型能够准确地估计排队时间。提出了基于驾驶员容忍度的排队延误分级标准。     

插电式混合动力汽车高电压部件设计及布置

根据整车设计要求,建立插电式双电机MG1/MG2+行星轮系混合动力汽车高电压系统方案模型。通过理论计算及工程分析确定高压电池组、高电压线缆、双电机MG1/MG2、变频器(转换器/逆变器)、空调压缩机等高电压部件的结构及关键参数。针对高电压部件布置的安全及可靠性提出建议。