基于粒子群算法的水下多元线阵阵形有源校正方法

针对存在阵元位置误差的水下多元线阵,提出一种基于粒子群优化算法的远场有源阵形校正方法.该方法选用2个辅助源分时工作方式,利用无条件最大似然方位估计算法构建目标函数,并通过粒子群算法对阵元位置进行寻优.利用该方法对均匀线阵进行性能仿真实验.结果表明:该方法稳健性好、校正精度高,具有一定的应用前景.     

基于OpenStreetMap的城市自行车网建模与多判据路径规划

自行车交通是一种健康、绿色、环保的交通出行方式,合理地规划自行车出行路线对于满足骑行者多元化出行需求、构建安全规范的城市交通出行环境具有重要的意义.在对真实骑行者路径选择行为深入分析的基础上,提出了基于Open Street Map的城市自行车网络的构建方法及基于其上的多判据自行车路径优化的数学模型,并给出了求解该模型的一种基于聚类的最优多判据路径规划方法.实验仿真结果表明,该模型及方法能够生成满足骑行者真实需求的多判据路线方案.     

Privacy-preserving MaaS fleet management

On-demand traffic fleet optimization requires operating Mobility as a Service (MaaS) companies such as Uber, Lyft to locally match the offer of available vehicles with their expected number of requests referred to as demand (as well as to take into account other constraints such as driver’s schedules and preferences). In the present article, we show that this problem can be encoded into a Constrained Integer Quadratic Program (CIQP) with block independent constraints that can then be relaxed in the form of a convex optimization program. We leverage this particular structure to yield a scalable distributed optimization algorithm corresponding to computing a gradient ascent in a dual space. This new framework does not require the drivers to share their availabilities with the operating company (as opposed to standard practice in today’s mobility as a service companies). The resulting parallel algorithm can run on a distributed smartphone based platform.     

Strain prediction for critical positions of FPSO under different loading of stored oil using GAIFOA-BP neural network

FPSO (floating, production, storage and offloading) units are widely used in the offshore oil and gas industry. Generally, FPSOs have excellent oil storage capacity owing to their huge oil cargo holds. The volume and distribution of stored oil in the cargo holds influence the strain level of hull girder, especially at critical positions of FPSO. However, strain prediction using structural analysis tools is computationally expensive and time consuming. In this study, a prediction tool based on back-propagation (BP) neural network called GAIFOA-BP is proposed to predict the strain values of concerned positions of an FPSO model under different oil storage conditions. The GAIFOA-BP combines BP model and GAIFOA which is a combination of genetic algorithm (GA) and an improved fruit fly optimization algorithm (IFOA). Results from three benchmark tests show that the GAIFOA-BP model has a remarkable performance. Subsequently, a total of 81 sets of training data and 25 sets of testing data are obtained from experiment using fiber Bragg grating (FBG) sensors installed on the surface of an FPSO model. The numerical results show that the GAIFOA-BP is capable of predicting the strain values with higher accuracy as compared with other BP models. Finally, the reserved GAIFOA-BP model is utilized to predict the strain values under the inputs of a 10-day time series of volume and distribution of stored oil. The predicted strain results are further used to calculate the fatigue consumption of measurement points.     

横梁端部节点优化

通过有限元计算,对比几种常见的横梁端部连接方式,综合考虑结构整体强度、钢材使用量、舱室空间利用率、施工便利性等方面的影响因素,确定较优的连接过渡方式和过渡结构的参数尺寸,为船舶设计横梁端部节点形式的确定提供参考。     

智能网联车环境下高速匝道汇入车流轨迹优化模型

为了解决传统匝道控制车流汇入时车辆需要减速至停止，从而造成延误时间过长的问题，提出了一种智能网联车环境下的高速匝道汇入车辆轨迹优化的两阶段优化模型，其中，第1 阶段优化车辆进入匝道口的时序；第2 阶段基于第1 阶段的最优时序，优化车辆轨迹. 根据所构建的模型设计了一种启发式算法优化车辆通过匝道冲突区域的时序，然后结合 GPOPS工具优化车辆的轨迹.为了验证所提出方法的有效性，将所提出的方法应用到20 min 随机到达的车流，进行仿真实验.实验结果表明，与先进先出的方法相比，本文所提出的方法能够使总延误减少59.7%，总油耗减少10.5%，说明该方法能够实现车辆以较高的速度通过匝道冲突区域，有效地减少了车辆汇入延误，同时也节约了油耗.     

A real-time adaptive signal control in a connected vehicle environment

The state of the practice traffic signal control strategies mainly rely on infrastructure based vehicle detector data as the input for the control logic. The infrastructure based detectors are generally point detectors which cannot directly provide measurement of vehicle location and speed. With the advances in wireless communication technology, vehicles are able to communicate with each other and with the infrastructure in the emerging connected vehicle system. Data collected from connected vehicles provides a much more complete picture of the traffic states near an intersection and can be utilized for signal control. This paper presents a real-time adaptive signal phase allocation algorithm using connected vehicle data. The proposed algorithm optimizes the phase sequence and duration by solving a two-level optimization problem. Two objective functions are considered: minimization of total vehicle delay and minimization of queue length. Due to the low penetration rate of the connected vehicles, an algorithm that estimates the states of unequipped vehicle based on connected vehicle data is developed to construct a complete arrival table for the phase allocation algorithm. A real-world intersection is modeled in VISSIM to validate the algorithms. Results with a variety of connected vehicle market penetration rates and demand levels are compared to well-tuned fully actuated control. In general, the proposed control algorithm outperforms actuated control by reducing total delay by as much as 16.33% in a high penetration rate case and similar delay in a low penetration rate case. Different objective functions result in different behaviors of signal timing. The minimization of total vehicle delay usually generates lower total vehicle delay, while minimization of queue length serves all phases in a more balanced way.     

Robust weekly aircraft maintenance routing problem and the extension to the tail assignment problem

In this paper, we study two closely related airline planning problems: the robust weekly aircraft maintenance routing problem (RWAMRP) and the tail assignment problem (TAP). In real life operations, the RWAMRP solution is used in tactical planning whereas the TAP solution is implemented in operational planning. The main objective of these two problems is to minimize the total expected propagated delay (EPD) of the aircraft routes. To formulate the RWAMRP, we propose a novel weekly line-of-flights (LOF) network model that can handle complex and nonlinear cost functions of EPD. Because the number of LOFs grows exponentially with the number of flights to be scheduled, we propose a two-stage column generation approach to efficiently solve large-scale real-life RWAMRPs. Because the EPD of an LOF is highly nonlinear and can be very time-consuming to accurately compute, we propose three lower bounds on the EPD to solve the pricing subproblem of the column generation. Our approach is tested on eight real-life test instances. The computational results show that the proposed approach provides very tight LP relaxation (within 0.6% of optimal solutions) and solves the test case with more than 6000 flights per week in less than three hours. We also investigate the solutions obtained by our approach over 500 simulated realizations. The simulation results demonstrate that, in all eight test instances, our solutions result in less EPDs than those obtained from traditional methods. We then extend our model and solution approach to solve realistically simulated TAP instances.     

How the environmental impact affects the design of logistics networks based on cost minimization

The degree of centralization of the logistics network is one of the important strategic decisions to take. This issue has often been studied but mainly from a cost minimization focus. This research studies the influence of incorporating the environmental impact in logistics network design models, comparing the results with those obtained considering cost minimization only. A fuzzy biobjective optimization model is used to carry out a number of experiments. By weighting the relative importance of the two objectives, the differences with respect to the base cost minimization solution can be ascertained. Our results show that in general more material is moved through warehouses when the environmental impact is considered and more decentralized facilities are opened.     

基于一个二维水弹塑性方法和极限强度评估的集装箱船结构优化研究

海上极端波过去常常导致船舶结构的极限破坏,而船舶的极限崩溃涉及到船体结构的动态极限强度和结构非线性.该文通过二维的水弹塑性方法研究了集装箱船在极端波中的非线性动态强度,该方法考虑了船体的极限强度以及船体结构的非线性和波浪之间的耦合.并通过该二维水弹塑性方法和极限评估方法研究了船体结构的结构优化.文中还通过二次规划法(SQP)来优化基于非线性的动态强度的集装箱船体结构.最少的结构成本是本优化的目标函数,约束条件保证船体的强度要小于结构的极限强度,并且结构设计尺寸要满足规范的要求.随着设计波高的变化,这些优化的设计变量的变化趋势得以发现,一些研究的结论可用于船舶规范的参考.