铁路枢纽折角车流数值变化的动态模拟

以解编车流作业规则和系统资源限制为约束,构造不同目标函数下铁路枢纽编组站作业分工数学模型,给出折角车流理论最大值和最小值及相应编组站作业分工方式及车流条件。基于折角车流变化的复杂性和多样性,将外部车流环境视为一个动态的随机输入,以特定铁路枢纽为背景用计算机模拟技术和遗传算法计算不同条件下折角车流数值解。通过对模拟数据趋势变化比较分析,提出铁路枢纽运输组织不应过分追求折角车流最小等结论。     

内破裂的数值模拟与分析

应用气—波两相流理论，引入计算流体动力学方法中的SIMPLE（Semi—ImplictMethodforPressure－LinkedEquations）方程，并在此基础上进行改进，对压力筒内的内破裂现象进行了系统的研究。本文发展了一套不依赖于试验结果的预报方法，较之以前的理论研究结果有了长足的进展，所采用的模型与假设能用于多种内破裂状况的模拟与预报。本文对一典型的内破状态进行了数值模拟，结合物理现象对模拟结果进行了分析，并与试验作比较。分析结果以一组计算机所绘图形表示，输出结果可作为压力筒结构动力分析的基础，所研制的程序也可作为内破裂问题流—固耦合研究的一大模块。     

多值非线性系统的自适应控制

提出了带有多值非线性环节的线性离散系统的自适应控制算法，仿真实验的结果表明：该算法简单易行具有明显的优点，跟踪误差比采用一般的自适应控制算法时要小得多，且能保证闭环系统大范围近收敛。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

机车车辆滚动振动试验台和试验方法

本文阐述了机车车辆室内试验台试验的优点，系统介绍了我国自行研制的机车车辆整车滚动振动试验台，从运动自由度、机械结构到系统的组成，并给出试验台的主要功能参数、试验能力，最后介绍了机车车辆动力学试验台试验方法和试验过程。     

桑塔纳轿车座椅总成模拟碰撞数值分析及试验研究

本文应用Ｌｓ－Ｄｙｎａ３ｄ非线性有限元软件和ＳＧＩ Ｐｏｗｅｒ－Ｃｈａｌｌｅｎｇｅ计算机，对桑塔纳轿车前座椅总成进行了碰撞模拟数值分析。为验证分析结果的可靠性，进行了模拟碰撞试验。数值分析和实际的模拟碰撞试验数据比较表明，两者之间具有很强的相关性。     

弹性船体波激响应时域过程的数值模拟

本文从入射波的波浪现实出发，用非线性水弹性积分─微分法进行船体运动和结构动响应的时间历程模拟，直接将试验测量结果与理论计算在时域内作比较，这有利于揭示砰击和上浪等非线性瞬态作用导致冲荡响应的力学机理。这种模拟及其验证方法避免了对理论和试验结果的统计特性进行比较时，因子样长度的限制和数据处理过程所带来的不确定性，比峰值比较更能说明波激响应数学模型的精确性和可靠性。     

模似器在港口航道设计中的应用

阐述船舶操纵模拟器在港口航道设计中的应用情况。通过上海港外高桥挖入式港池设计研究的实例说明模拟器的成功运用。这些模拟技术和方法对于降低航道费用、增强船舶营运安全和提高港口生产效率都有较大作用。     

三点式四象限变流器的计算机仿真设计

阐述了三点式四象限变流器的性能、特点及ＰＷＭ调制波的形成，提出了系统的微机控制方案，建立了系统的数学模型，最后给出了仿真波形。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.