Effects of perceived safety,involvement and perceived service quality on loyalty intention among ride-sourcing passengers

Transportation - Ride-sourcing services are increasingly popular since they were first introduced in the last decade. Particularly in developing countries where public transport systems have...     

Experimental study on piston- and sloshing- mode moonpool resonances

An experimental study was performed on the piston- and sloshing-mode moonpool resonances of offshore structures. Two different geometries were considered to investigate the flow characteristics in a plain moonpool and a moonpool with a cofferdam. To examine the efficiency of a cofferdam for reducing the flow in a moonpool, three cofferdam geometries were tested. The plain moonpool presented violent flows as a result of the piston- and sloshing-mode resonances. However, the moonpool with the cofferdam introduced violent sloshing waves instead of the ascent and descent of the water column in the piston-mode moonpool resonance. Among three different cofferdam geometries, the model with a right triangle facing to the left on the top of the cofferdam was most effective in reducing the flow in the moonpool when compared with the other models.     

Robust optimization for emergency logistics planning: Risk mitigation in humanitarian relief supply chains

This paper proposes a methodology to generate a robust logistics plan that can mitigate demand uncertainty in humanitarian relief supply chains. More specifically, we apply robust optimization (RO) for dynamically assigning emergency response and evacuation traffic flow problems with time dependent demand uncertainty. This paper studies a Cell Transmission Model (CTM) based system optimum dynamic traffic assignment model. We adopt a min–max criterion and apply an extension of the RO method adjusted to dynamic optimization problems, an affinely adjustable robust counterpart (AARC) approach. Simulation experiments show that the AARC solution provides excellent results when compared to deterministic solution and sampling based stochastic programming solution. General insights of RO and transportation that may have wider applicability in humanitarian relief supply chains are provided.     

Drivers' route choice and learning mechanism under bounded information environment

In this paper, we propose the theory of Rational Beliefs as the model of expectations that extends the theory of rational expectations to the postulated environments. Under the rational beliefs paradigm, drivers do not have structural knowledge of traffic conditions and they choose their routes based only on personal experiences and decision‐making rules. We found that if drivers have different decision‐making rules and experiences, then they form different beliefs of traffic conditions (e.g. average travel time) even though they have the same public information and use the same routes. Under the rational beliefs model, drivers are not motivated to renew their beliefs because the beliefs are compatible with their experiences. Therefore, the heterogeneity of beliefs does not disappear even though they have long‐term learning. In order to investigate how drivers form their beliefs of traffic conditions under bounded information environments, numerical experiment is carried out.     

叉车液压转向系统的改造

在现代港口中,叉车数量多.应用广,是装卸机械的主力.叉车的转向系统直接影响到叉车使用的灵活性和安全性.     

耦合非线性三维海洋立管的边界控制(英文)

This paper presents a design of boundary controllers implemented at the top end for global stabilization of a marine riser in a three dimensional space under environmental loadings. Based on the energy approach, nonlinear partial differential equations of motion, including bending-bending and longitudinal-bending couplings for the risers are derived. The couplings cause mutual effects between the three independent directions in the riser’s motions, and make it difficult to minimize its vibrations. The Lyapunov direct method is employed to design the boundary controller. It is shown that the proposed boundary controllers can effectively reduce the riser’s vibration. Stability analysis of the closed-loop system is performed using the Lyapunov direct method. Numerical simulations illustrate the results.     

Effect of various LPG supply systems on exhaust particle emission in spark-ignited combustion engine

The particle size distribution and particle number (PN) concentration emitted by internal combustion engine are a subject of significant environmental concern because of their adverse health effects and environmental impact. This subject has recently attracted the attention of the Particle Measurement Programme (PMP). In 2007, the UN-ECE GRPE PMP proposed a new method to measure particle emissions in the diluted exhaust of automotive engines and a regulation limit (<6.0×10¹¹ #/km, number of particles). The specific PN regulation of spark-ignited combustion engine will be regulated starting on September 1, 2014 (EURO 6). In this study, three types of LPG supply systems (a mixer system and a multi-point injection system with gas-phase or liquid-phase LPG fuel) were used for a comparison of the particulate emission characteristics, including the nano-sized particle number density. Each of the three LPG vehicles with various LPG injection systems contained a multi-cylinder engine with same displacement volumes of 2,000 cm³ and a three-way catalytic converter. The test fuel that was used in this study for the spark-ignited combustion engine was n-butane basis LPG fuel, which is primarily used for taxi vehicles in Korea. The characteristics of nano-particle size distribution and number concentration of particle sizes ranging from 20 to 1,000 nm (aerodynamic diameter) that were emitted from the three LPG vehicles with various LPG supply systems were investigated by using a condensation particle counter (CPC), which is recommended by the PMP under both the NEDC and FTP-75 test modes on a chassis dynamometer. The experimental results indicate that the PN emission characteristics that were obtained by the CPC system using the PMP procedure are sufficiently reliable compared to other regulated emissions. Additionally, the sources of PN emissions in ascending order of magnitude are as follows: mixer type, gas-phase LPG injection (LPGi) and liquid-phase LPG injection (LPLi) passenger vehicles. The liquid-phase LPG injection system produced relatively large particle sizes and number concentrations compared to the gaseous system, regardless of the vehicle driving cycle. This phenomenon can be explained by unburned micro-fuel droplets that were generated due to a relatively short homogeneous fuel-air mixture duration in the engine intake manifold. Also the particle number emissions from the LPG vehicle were influenced by the vehicle driving cycle.     

Cross-sector Analysis of Four Renegotiated Transport PPPs in Portugal

Abstract

This paper uses the Fertagus renegotiation results as a reference and explores the features that made it such a widely commended case, aiming to identify the best practice to be followed in other cases. The two main questions that this paper aimed to respond were: Was the success of the renegotiation process in the Fertagus contract due to mode-specific factors? Are those factors (mode specific or not) transferable to other modes under public private partnership (PPP) contracts and if so, to what extent? Regarding the mode specificity and transferability analysis, it can be noticed that much of the features were not mode specific in theory, however for the successful transferability to other transport modes, some changes should be made to the PPP model taking into account modal specificities and national contexts.     

Drivers' perceptions regarding speeding and driving on urban residential streets with a 30 km/h speed limit

Previous studies have shown very little information regarding drivers' opinions, attitudes and behaviours with respect to speeding and driving on urban residential streets with a 30 km/h speed limit. The present research aims to address this issue by conducting a questionnaire study with a sample of 367 Japanese drivers. The results showed that drivers tended to have positive beliefs about complying with the 30 km/h speed limit and understand the negative consequences of speeding; however, a majority of the drivers considered breaking the speed limit as a way to reduce their travel time. While the extent of speeding was found to be very serious, a number of drivers still supported the use of a 30 km/h speed limit on residential streets and favoured protecting the right of vulnerable street users. The logistic regression models developed in this study identified that the drivers who did not support the 30 km/h speed limit were associated with those who had committed traffic-law violations, who had negative beliefs about complying with the speed limit, who did not consider residents' opinions, who believed it is acceptable for them to drive at a high speed, and who felt it difficult to refrain from speeding. With regard to anti-speeding countermeasures, under drivers' point of view, streets should be designed to make the 30 km/h speed limit more credible, although this study also showed evidence supporting the application of public awareness programmes and social campaigns as speeding interventions. In addition, this research investigated drivers' speed choices in various specific driving circumstances, and six underlying factors affecting drivers' speed choices were determined. On the basic of the findings, the implications and suggestions for speeding interventions were also discussed.     

Global robust and adaptive output feedback dynamic positioning of surface ships

A constructive method was presented to design a global robust and adaptive output feedback controller for dynamic positioning of surface ships under environmental disturbances induced by waves, wind, and ocean currents. The ship’s parameters were not required to be known. An adaptive observer was first designed to estimate the ship’s velocities and parameters. The ship position measurements were also passed through the adaptive observer to reduce high frequency measurement noise from entering the control system. Using these estimate signals, the control was then designed based on Lyapunov’s direct method to force the ship’s position and orientation to globally asymptotically converge to desired values. Simulation results illustrate the effectiveness of the proposed control system. In conclusion, the paper presented a new method to design an effective control system for dynamic positioning of surface ships.