Organic carbon budget for the Gulf of Bothnia

We calculated input of organic carbon to the unproductive, brackish water basin of the Gulf of Bothnia from rivers, point sources and the atmosphere. We also calculated the net exchange of organic carbon between the Gulf of Bothnia and the adjacent marine system, the Baltic Proper. We compared the input with sinks for organic carbon; permanent incorporation in sediments and mineralization and subsequent evasion of CO₂ to the atmosphere. The major fluxes were riverine input (1500 Gg C year^− 1), exchange with the Baltic Proper (depending on which of several possible DOC concentration differences between the basins that was used in the calculation, the flux varied between an outflow of 466 and an input of 950 Gg C year^− 1), sediment burial (1100 Gg C year^− 1) and evasion to the atmosphere (3610 Gg C year^− 1). The largest single net flux was the emission of CO₂ to the atmosphere, mainly caused by bacterial mineralization of organic carbon. Input and output did not match in our budget which we ascribe uncertainties in the calculation of the exchange of organic carbon between the Gulf of Bothnia and the Baltic Proper, and the fact that CO₂ emission, which in our calculation represented 1 year (2002) may have been overestimated in comparison with long-term means. We conclude that net heterotrophy of the Gulf of Bothnia was due to input of organic carbon from both the catchment and from the Baltic Proper and that the future degree of net heterotrophy will be sensible to both catchment export of organic carbon and to the ongoing eutrophication of the Baltic Proper.     

Maritime accident investigation and temporal determinants of maritime accidents: A case study

This paper presents the results of an investigation into temporal determinants of maritime accidents based on a data-set obtained from the proceedings of formal inquiries in the former German Democratic Republic (GDR). The results show that there is no statistically significant outcome between the probability for an accident and the time of watch. Thus the results do not confirm previous studies, which reported significant time of day effects.The outcome of this study indicates that marine inquiries can provide useful data for an analysis of underlying causes of maritime accidents. It is suggested that accident inquiries should be extended into the area of watch systems employed and should record the hours of work and of rest of the officers on the watch involved in a maritime accident.     

Improving automobile insurance ratemaking using telematics: incorporating mileage and driver behaviour data

Transportation - We show how data collected from a GPS device can be incorporated in motor insurance ratemaking. The calculation of premium rates based upon driver behaviour represents an...     

Mooring line tension observed through a maximum entropy spectrum

A method for measuring mooring line tension is proposed based on observation of the natural frequencies of the mooring line segment between the winch and the fairlead. The anchor line tension is observed through the string equation where an analytical expression for the line's eigen-frequencies is obtained. The tension is observed on line by utilizing a nonparametric system identification approach in which the peaks of a maximum entropy spectrum of the transverse acceleration measures of the vibrating string are automatically identified. The method is verified against full-scale data from the Troll B floating concrete oil production platform operating in the North Sea. Received for publication on Feb. 24, 1999; accepted on July 26, 1999     

Out-of-home activities,daily travel,and subjective well-being

It is argued that utility theory that underpins current cost-benefit analyses of daily travel needs to be complemented. An alternative theoretical framework is to this end proposed which applies subjective well-being (SWB) to travel behaviour analysis. It is posited in this theoretical framework that participation in goal-directed activities, facilitated or hindered by travel, contributes to SWB, that the degree of travel-related stress in participating in these activities reduces SWB, and that positive affect associated with travel in itself has an impact on SWB.     

Modelling nutrient fluxes from sub-arctic basins: Comparison of pristine vs. dammed rivers

The deterministic Riverstrahler model of river functioning is applied for the first time to sub-arctic catchments. Seasonal nutrient (N, P, Si) deliveries to the coastal zone are simulated, and nutrient annual fluxes are established for the nearly pristine river Kalix (hereafter called Kalixälven) and the heavily dammed river Lule, (hereafter called Luleälven) both located in Northern Sweden and draining into the Bothnian Bay, Baltic Sea.For Kalixälven simulations are performed with a runoff calculated from precipitation, evapo-transpiration and temperature data for the period 1990–1999, using a hydrological model calibrated on observed monthly discharges at the river outlet. The same hydrological parameters are used to calculate specific runoff for the Luleälven basin in absence of dam regulation. Reservoir filling and emptying are simulated using a simplified representation of their management rules. Diffuse sources of nutrient are evaluated according to land cover of the catchment. The simulated seasonal trends are within the range of the observed data, in particular for discharge, dissolved silica, total phosphorus, inorganic nitrogen and total organic carbon. Specific runoff is 50% higher in the Luleälven than in the Kalixälven watershed due to higher altitudes and precipitations. Average silica, nitrate and phosphorus concentrations are much lower in Luleälven than in Kalixälven. Comparison of model results for the Luleälven with and without dams shows a reduction of respectively 25% and 30% in silica and phosphorus fluxes delivered at the outlet, while nitrogen delivery is increased by 10% in the dammed vs. undammed river system. The model allows assessing the respective role of reservoir trapping of nutrient in the reservoir through algal uptake and sedimentation, and of changes in the vegetation induced by flooding the valley formerly covered by forests and wetlands.     

Participating mass in colliding risers

One of the main challenges in estimating impact energy in collisions between marine risers is the assessment of the riser mass involved in the collision. Evidently the entire riser mass does not contribute to the collision. Hence, the question is: What is the equivalent riser mass which contributes to the impact energy? This article presents three different ways of estimating the riser mass participating in the collision energy. The first method is strictly experimental. The second method uses a numerical experiment together with system identification techniques. The third method is a strictly analytical method, which results in an asymptotically upper bounded estimate of the participating mass. Two risers are examined as case studies. The first riser is a 1 : 100 model scale riser used in collision experiments carried out at Marintek's towing tank in Trondheim, Norway. The second case uses a real world riser in use on the Troll B oil production platform operating in the North Sea. The proposed methods yield consistent and comparable results. Received for publication on Feb. 1, 1999; accepted on July 8, 1999     

Rigid moorings in shallow water: A wave power application. Part I: Experimental verification of methods

Experimental work carried out at 1:60 scale in a wave flume assessed the pitch motion and anchor loading of 3 articulated tower installations in 50 m water depth while being exposed to north Atlantic storms with H_s of 15.2 m and T_p of 18.4 s. The three installations differ only in that their mass and buoyancy characteristics provide a natural period in pitch at equilibrium of 13 s, 20 s and 34 s respectively. It is verified that the dominant behaviour can be simulated by a relatively simple mathematical model, allowing the critical parameters of peak anchor loads and pitch angles to be calculated and extrapolated to full scale. It is demonstrated from the experimental and simulation results that the mass characteristics of a non surface piercing tower can be used to offset some of the challenges of moving to shallow water. If done correctly, it is possible to keep horizontal anchor loads under control and reduce vortex-induced transverse loading at the expense of increased pitch motions. Overall, the use of articulated tower installations in water depths of 50 m would appear to be technically feasible, even in exposed areas. The limitations on the size of such structures and the consequences of the resulting pitch accelerations and induced anchor loads are the subject of further study. It is proposed that the model verified herein can be used to further assess their potential at delivering viable wave power position mooring systems.     

“Local background” levels of carbon monoxide in an urban area

The objective of this study was to obtain a better understanding of carbon monoxide (CO) concentrations immediately upwind of urban roadways, the “local background” values, and how these concentrations depend upon the surrounding traffic and the general meteorology. Measurements were made at seven sites in Seattle, WA during the winter of 1993. Local background CO concentrations were characterized by an absence of short term fluctuations, a steady buildup during the 3 p.m. to 11 p.m. period, and a lack of spatial gradients in the 8-h average values. Distinctly different log-normal distributions of the 8-h averages were observed for “trafficked” sites versus “urban park” sites, with mean values of 1.6 and 1.0 ppm respectively. A simple regression model was developed to predict the local background CO that includes distance from roadway, average daily traffic of nearby roadways, and the frequency of occurrence of low wind speeds (R² = 0.74; F = 170).     

Train-Track Interaction and Mechanisms of Irregular Wear on Wheel and Rail Surfaces

Summary High-frequency train-track interaction and mechanisms of wheel/rail wear that is non-uniform in magnitude around/along the running surface are surveyed. Causes, consequences and suggested remedies to relieve the problems are discussed for three types of irregular wheel/rail wear: (1) short-pitch rail corrugation on tangent tracks and large radius curves, (2) wheel corrugation as caused by tread braking, and (3) wheel polygonalisation. The state-of-the-art in modelling of dynamic train-track interaction in conjunction with prediction of irregular wear is reviewed.