排序方式: 共有12条查询结果,搜索用时 46 毫秒
1.
2.
采用CFD分析法,对弓头及其支架连接区域的涡流结构和噪声源结构进行了分析,指出改进型支架与最佳型弓头组合对降低受电弓的空气动力噪声非常有效. 相似文献
3.
In the present paper, a new trimaran Pure Car Carrier (PCC) is proposed and a feasibility study on the ship is carried out.
In this study, first, the effective horse power (EHP)/car of the PCC running in still water is predicted. By comparing the
predicted EHP/car with that of a conventional mono-hull PCC, it is found that the trimaran PCC is superior to the conventional
mono-hull PCC at rather higher speed. As ship speed increases, the reduction of the resistance of the trimaran is bigger.
It is also found that at common service speed of PCCs, the EHP/car of a small PCC is lower than that of a conventional PCC.
Secondly, the optimal L/B of a main-hull of the trimaran PCC in still water is determined. The optimal L/B of the main-hull varies with ship speed and size because the wave resistance decreases but the frictional resistance increases
as L/B of the hull increases. As ship size increases, the optimal L/B of the main-hull of the trimaran PCC decreases. 相似文献
4.
Ships which have large structures above water surface, such as pure car carriers (PCCs) and container vessels, have large
speed reduction by wind pressure. In the present study, the running speed of a large PCC with two or more sails for using
wind power is simulated. The simulated results demonstrate that the ship can keep a constant service speed even in winds of
20m/s except head and bow winds. This sail system can shorten annual average navigation time by about 4 hours per voyage. 相似文献
5.
Mitsuru Ikeda 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2015,53(3):357-369
Gasen-do FE is a simulation software for pantograph/catenary dynamic interaction analysis. Gasen-do FE is based on the non-linear finite element method, and its code is implemented in Matlab. This program corresponds to 2D and 3D models of simple and compound catenaries. Steady arms and catenary suspension equipments such as droppers and hangers are modelled as bar elements taking into consideration the tangential stiffness due to their geometrical non-linearity. It is possible to simulate the effect of slackening of droppers and hangers. This paper will introduce the computational algorithm of this program and the validation result by comparing with experimental data. 相似文献
6.
In this paper, added resistances acting on a hull of non ballast water ship(NBS) in high waves is discussed. The non ballast water ships were developed at the laboratory of the authors at Osaka Prefecture University, Japan. In the present paper, the performances of three kinds of bow shapes developed for the NBS were theoretically and experimentally investigated to find the best one in high waves. In previous papers, an optimum bow shape for the NBS was developed in calm water and in moderated waves. For a 2 m model for experiments and computations, the wave height is 0.02 m. This means that the wave height is 15% of the draft of the ship in full load conditions. In this paper, added resistances in high waves up to 0.07 m for a 2 m model or 53% of the full load draft are investigated. In such high waves linear wave theories which have been used in the design stage of a ship for a long time may not work well anymore, and experiments are the only effective tool to predict the added resistance in high waves. With the computations for waves, the ship is in a fully captured condition because shorter waves, λ/Lpp0.6, are assumed. 相似文献
7.
To study the effect of different transport policies on reducing the average comprehensive travel cost (CTC) of all travel modes, by increasing public transport modal share and decreasing car trips, an optimization model is developed based on travel cost utility. A nested logit model is applied to analyze trip modal split. A Genetic Algorithm is then used to determine the implementation of optimal solutions in which various transport policies are applied in order to reduce average CTC. The central urban region of Beijing is selected as the study area in this research. Different policies are analyzed for comparison, focusing on their optimal impacts on minimizing the average CTC utility of all travel modes by rationally allocating trips to different travel modes in the study area. It is found that the proposed optimization model provides a reasonable indication of the effect of policies applied. 相似文献
8.
In this research,a commercial CFD code "Fluent" was applied to optimization of bulbous bow shape for a non ballast water ships(NBS).The ship was developed at the Laboratory of the authors in Osaka Prefecture University,Japan.At first,accuracy of the CFD code was validated by comparing the CFD results with experimental results at towing tank of Osaka Prefecture University.In the optimizing process,the resistances acting on ships in calm water and in regular head waves were defined as the object function.Following features of bulbous bow shapes were considered as design parameters: volume of bulbous bow,height of its volume center,angle of bow bottom,and length of bulbous bow.When referring to the computed results given by the CFD like resistance,pressure and wave pattern made by ships in calm water and in waves,an optimal bow shape for ships was discovered by comparing the results in the series of bow shapes.In the computation on waves,the ship is in fully captured condition because shorter waves,λ/Lpp 0.6,are assumed. 相似文献
9.
In recent years, demands for car transportation by a ship have been increasing with favorable economic conditions in auto
sector, and the need of a pure car carrier (PCC) has grown quickly. A PCC needs huge parking space but smaller displacement
since a car is comparatively light for its volume. As a result, almost all PCCs have wide breadth, shallow draft and huge
structure above the water surface. These features cause some technical issues of a PCC, like lack of stability, effect of
strong winds on its resistance, difficulty of course keeping in rough seas, difficulty of berthing in strong winds, and so
on. To overcome these technical issues, one of the authors has proposed a new concept for a PCC. This is a trimaran PCC which
has very limited transverse bulkheads in the center hull by using two side hulls as fenders. In the present research, wind
forces acting on a scale model of the trimaran PCC were measured in the towing tank with a wind generator at Osaka Prefecture
University. Furthermore, in order to clarify the characteristics of wind pressure on the trimaran, height and width of tunnels
which are between a main hull and side hulls were changed. And then, in order to imitate a real ship, we used wind reduction
technology of corner-cut design for accommodation house of the ship. Moreover, the wind pressure acting on the trimaran was
compared with that on a mono-hull PCC. Using these experimental and theoretical results, an estimation method of wind pressure
acting on the trimaran PCC is deduced. 相似文献
10.
Stefano Bruni Jorge Ambrosio Alberto Carnicero Yong Hyeon Cho Lars Finner Mitsuru Ikeda 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2015,53(3):412-435
This paper describes the results of a voluntary benchmark initiative concerning the simulation of pantograph–catenary interaction, which was proposed and coordinated by Politecnico di Milano and participated by 10 research institutions established in 9 different countries across Europe and Asia. The aims of the benchmark are to assess the dispersion of results on the same simulation study cases, to demonstrate the accuracy of numerical methodologies and simulation models and to identify the best suited modelling approaches to study pantograph–catenary interaction. One static and three dynamic simulation cases were defined for a non-existing but realistic high-speed pantograph–catenary couple. These cases were run using 10 of the major simulation codes presently in use for the study of pantograph–catenary interaction, and the results are presented and critically discussed here. All input data required to run the study cases are also provided, allowing the use of this benchmark as a term of comparison for other simulation codes. 相似文献