Experimental study on piston- and sloshing- mode moonpool resonances

An experimental study was performed on the piston- and sloshing-mode moonpool resonances of offshore structures. Two different geometries were considered to investigate the flow characteristics in a plain moonpool and a moonpool with a cofferdam. To examine the efficiency of a cofferdam for reducing the flow in a moonpool, three cofferdam geometries were tested. The plain moonpool presented violent flows as a result of the piston- and sloshing-mode resonances. However, the moonpool with the cofferdam introduced violent sloshing waves instead of the ascent and descent of the water column in the piston-mode moonpool resonance. Among three different cofferdam geometries, the model with a right triangle facing to the left on the top of the cofferdam was most effective in reducing the flow in the moonpool when compared with the other models.     

Robust optimization for emergency logistics planning: Risk mitigation in humanitarian relief supply chains

This paper proposes a methodology to generate a robust logistics plan that can mitigate demand uncertainty in humanitarian relief supply chains. More specifically, we apply robust optimization (RO) for dynamically assigning emergency response and evacuation traffic flow problems with time dependent demand uncertainty. This paper studies a Cell Transmission Model (CTM) based system optimum dynamic traffic assignment model. We adopt a min–max criterion and apply an extension of the RO method adjusted to dynamic optimization problems, an affinely adjustable robust counterpart (AARC) approach. Simulation experiments show that the AARC solution provides excellent results when compared to deterministic solution and sampling based stochastic programming solution. General insights of RO and transportation that may have wider applicability in humanitarian relief supply chains are provided.     

Drivers' route choice and learning mechanism under bounded information environment

In this paper, we propose the theory of Rational Beliefs as the model of expectations that extends the theory of rational expectations to the postulated environments. Under the rational beliefs paradigm, drivers do not have structural knowledge of traffic conditions and they choose their routes based only on personal experiences and decision‐making rules. We found that if drivers have different decision‐making rules and experiences, then they form different beliefs of traffic conditions (e.g. average travel time) even though they have the same public information and use the same routes. Under the rational beliefs model, drivers are not motivated to renew their beliefs because the beliefs are compatible with their experiences. Therefore, the heterogeneity of beliefs does not disappear even though they have long‐term learning. In order to investigate how drivers form their beliefs of traffic conditions under bounded information environments, numerical experiment is carried out.     

叉车液压转向系统的改造

在现代港口中,叉车数量多.应用广,是装卸机械的主力.叉车的转向系统直接影响到叉车使用的灵活性和安全性.     

耦合非线性三维海洋立管的边界控制(英文)

This paper presents a design of boundary controllers implemented at the top end for global stabilization of a marine riser in a three dimensional space under environmental loadings. Based on the energy approach, nonlinear partial differential equations of motion, including bending-bending and longitudinal-bending couplings for the risers are derived. The couplings cause mutual effects between the three independent directions in the riser’s motions, and make it difficult to minimize its vibrations. The Lyapunov direct method is employed to design the boundary controller. It is shown that the proposed boundary controllers can effectively reduce the riser’s vibration. Stability analysis of the closed-loop system is performed using the Lyapunov direct method. Numerical simulations illustrate the results.     

Effect of various LPG supply systems on exhaust particle emission in spark-ignited combustion engine

The particle size distribution and particle number (PN) concentration emitted by internal combustion engine are a subject of significant environmental concern because of their adverse health effects and environmental impact. This subject has recently attracted the attention of the Particle Measurement Programme (PMP). In 2007, the UN-ECE GRPE PMP proposed a new method to measure particle emissions in the diluted exhaust of automotive engines and a regulation limit (<6.0×10¹¹ #/km, number of particles). The specific PN regulation of spark-ignited combustion engine will be regulated starting on September 1, 2014 (EURO 6). In this study, three types of LPG supply systems (a mixer system and a multi-point injection system with gas-phase or liquid-phase LPG fuel) were used for a comparison of the particulate emission characteristics, including the nano-sized particle number density. Each of the three LPG vehicles with various LPG injection systems contained a multi-cylinder engine with same displacement volumes of 2,000 cm³ and a three-way catalytic converter. The test fuel that was used in this study for the spark-ignited combustion engine was n-butane basis LPG fuel, which is primarily used for taxi vehicles in Korea. The characteristics of nano-particle size distribution and number concentration of particle sizes ranging from 20 to 1,000 nm (aerodynamic diameter) that were emitted from the three LPG vehicles with various LPG supply systems were investigated by using a condensation particle counter (CPC), which is recommended by the PMP under both the NEDC and FTP-75 test modes on a chassis dynamometer. The experimental results indicate that the PN emission characteristics that were obtained by the CPC system using the PMP procedure are sufficiently reliable compared to other regulated emissions. Additionally, the sources of PN emissions in ascending order of magnitude are as follows: mixer type, gas-phase LPG injection (LPGi) and liquid-phase LPG injection (LPLi) passenger vehicles. The liquid-phase LPG injection system produced relatively large particle sizes and number concentrations compared to the gaseous system, regardless of the vehicle driving cycle. This phenomenon can be explained by unburned micro-fuel droplets that were generated due to a relatively short homogeneous fuel-air mixture duration in the engine intake manifold. Also the particle number emissions from the LPG vehicle were influenced by the vehicle driving cycle.     

高速铁路与公路客运竞争的市场分担率模型研究

随着高速铁路的快速发展,高速铁路网络初步形成,对公路客运也产生了巨大的冲击。在原有由经济性、快速性、方便性、舒适性、安全性因素组成的传统Logit函数上,加入偏好性因素,构建了改进的Logit函数模型来分析竞争市场分担率。同时,基于运行时速和距离,构建了高速铁路与公路客运市场分担率演变模型并进行了敏感性分析。结果表明,从市场总份额和影响因素重要性角度来讲,高速铁路与公路客运市场份额分别为53.32%和46.8%;从不同距离上的竞争演变角度来讲,在高速铁路时速分别为200、250、300、350 km时,高速铁路与公路客运竞争的市场临界点分别为200、150、100、75 km,大于这些临界点时,高速铁路市场份额占优势;小于这些临界点时,公路客运市场份额占优势。     

Cross-sector Analysis of Four Renegotiated Transport PPPs in Portugal

Abstract

This paper uses the Fertagus renegotiation results as a reference and explores the features that made it such a widely commended case, aiming to identify the best practice to be followed in other cases. The two main questions that this paper aimed to respond were: Was the success of the renegotiation process in the Fertagus contract due to mode-specific factors? Are those factors (mode specific or not) transferable to other modes under public private partnership (PPP) contracts and if so, to what extent? Regarding the mode specificity and transferability analysis, it can be noticed that much of the features were not mode specific in theory, however for the successful transferability to other transport modes, some changes should be made to the PPP model taking into account modal specificities and national contexts.     

Global Inverse Optimal Tracking Control of Underactuated Omni-directional Intelligent Navigators (ODINs)

This paper presents a design of optimal controllers with respect to a meaningful cost function to force an underactuated omni-directional intelligent navigator (ODIN) under unknown constant environment...     

Large-scale network partitioning for decentralized traffic management and other transportation applications

For numerous large-scale engineering and science problems, domain decomposition (DD) has generally been accepted by research communities as among the most attractive methods to obtain solutions efficiently. As a prerequisite for the DD solution process, a large domain must be partitioned into several smaller subdomains, with the key to success (of any DD partitioning algorithm) being the number of system boundary nodes. The lower this number, the more efficiently the subdomains can be processed. Although various transportation researchers have hinted at the use of DD, for example, in intelligent transportation systems-enabled decentralized traffic management, it is assumed that the partition is given. This article presents a simple, efficient, and effective algorithm to decompose a transportation network into a predefined number of interconnected subdomains such that the number of system boundary nodes is small (first priority) and the number of nodes in each subdomain is of similar size (second priority). To assess the effectiveness (in terms of minimizing the number of system boundary nodes) of the proposed Shortest Distance Decomposition Algorithm, it is compared with METIS version 5.1.0, currently among the most widely used graph partitioning algorithms worldwide. Using large-scale, real-world transportation test networks, it was found that the Shortest Distance Decomposition Algorithm is better than METIS in 21 of the 27 examples tested; on average, it provided (approximately) 42.0% of the system boundary nodes (as compared to METIS results) in our large-scale examples.