Simulating ad-hoc demand-responsive transportation: a comparison of three approaches

Transport models are used to evaluate new infrastructure and public transport services, varied levels of demand, and new ideas for demand management. Exploring these proposals virtually is easier than implementation and testing in situ. However, existing models are based around traditional forms of transportation. As part of a feature analysis using a case study approach, three different simulation packages (a simple custom-developed package, traffic microsimulation, and agent-based simulation) are used to develop and demonstrate simulations of demand-responsive transportation (DRT) and analyze the advantages and disadvantages of each simulation approach for evaluating DRT. While the simulations display some relational replication (meaning they produce similar relational patterns with respect to certain variables), they do not show distributional replication (that is, the value of the results is not statistically similar), meaning that under- or over-estimation of predicted travel could occur. Recommendations for the application of each modeling approach are made.     

Traffic integration and environmental traffic management in Denmark

This paper assesses Danish experience in attempting to integrate traffic with its surroundings in existing areas. Rest and play areas, quiet roads with a 30 km/h speed limit, and major road schemes on urban shopping streets and through villages are all discussed; so too are policies seeking to create safe routes to school, the problems arising from the introduction of speed reduction measures on bus routes, and the merits of area‐wide as opposed to incremental approaches. Evaluations indicate that speed reductions to a maximum of 30 km/h are achievable on local roads, and that the quiet street approach represents a cost‐effective and popular means of achieving environmental improvements and safer, more liveable streets for residents. It is recommended as an appropriate model for Britain to follow. Incremental implementation risks being sub‐optimal in design terms but has distinct advantages in minimizing conflicts and enabling rapid implementation. Evaluations of shopping street and village schemes are incomplete but speed reductions and environmental gains have undoubtedly been achieved.     

缺失的环节

麦肯锡的研究表明：国际性的第三方物流公司也许拥有技术经验，但在当地缺少运输网络和与政府间的联系，而且也谈不上成本优势。     

The Effect of Topboxes on Motorcycle Stability

Hot wire anenometry measurements have been made in the wake of a model motorcycle and rider mounted in a windtunnel. Only in tests with a topbox present is there clear evidence of eddy shedding. Calculations have been performed on the corresponding full-scale motorcycle to determine the frequencies of the weave and wobble modes. Comparison with the wake frequencies extrapolated to full size show that at speeds of 31-34 m/s they coincide with those of the wobble mode which is found to be efficiently coupled to the aerodynamic excitation.     

A GIS‐based method to identify cost‐effective routes for rural deviated fixed route transit

Deviated fixed route transit (DFRT) service connecting rural and urban areas is a growing transportation mode in the USA. Little research has been done to develop frameworks for route design. A methodology to explore the most cost‐effective DFRT route is presented in this paper. The inputs include potential DFRT demand distribution and a road network. A heuristic is used to build possible routes by starting at urban cores and extending in all network directions in certain length increments. All the DFRT routes falling in the length range desired by the users are selected. The cost effectiveness of those routes, defined by operating cost per passenger trip, is compared. The most cost‐effective route is selected and presented in a GIS map. A case study illustrates the methodology in several Tennessee metropolitan regions. The most cost‐effective route length is case specific; some routes (e.g. those out of our Nashville case) are most cost effective when short, while others (e.g. those out of Memphis) are most cost effective when long. Government agencies could use the method to identify routes with the lowest operating cost per passenger given a route length or an operating cost budget. Copyright © 2016 John Wiley & Sons, Ltd.     

Scientists and Crew

This study reports on scientist/crew relations aboard research vessels at sea. It is a case study in a case study in a long-range project dealing with the relations of natural scientists in the U.S.A. to various segments of the lay population. An earlier paper dealt with the interaction of scientists and Government policy makers during the science-advisory process [1]. In that study we found that the frustration was reciprocal; scientists and policy makers were equally vocal on what was wrong with ‘ the other groups’. The present research, by comparison, focuses on scientists and members of ‘the working class’. Here we find the frustration rather one-sided, reflecting the differences in status and power of the two groups. On a research vessel, science and scientists control the lives and careers of the mariners. In the science-advising committee, members of both government and science meet as social equals.

In this paper elements of conflict between scientists and crew on a research vessel are described. It is suggested that conflict between these two groups is the inevitable result of extending the ‘intellectual’/‘worker’ class conflict of our society to a closed space at sea. The controlling mechanism of the conflict may be called ‘subcultural privacy’, a mechanism worked out by mariners to cope with the disrupting effects of a constant stream of strangers into their sea-going home. The mechanism takes the form of institutionalized ‘bitching’ and systematic physical separation of scientists and crew during critical periods of the day. It is suggested that attempts to create greater crew/scientist harmony by forcing by greater interaction (and thus a breakdown of subcultural privacy) will be counter productive.     

Independent control of all-wheel-drive torque distribution

The sophistication of all-wheel-drive (AWD) technology is approaching the point where the drive torque to each wheel can be independently controlled. This potentially offers vehicle handling enhancements similar to those provided by dynamic stability control, but without the inevitable reduction in vehicle acceleration. Independent control of AWD torque distribution would therefore be especially beneficial under acceleration close to the limit of stability. A vehicle model of a typical sports sedan was developed in Simulink, with fully independent control of torque distribution. Box-Behnken experimental design was employed to determine which torque distribution parameters have the greatest impact on the vehicle course and acceleration. A proportional-integral control strategy was implemented, applying yaw rate feedback to vary the front-rear torque distribution and lateral acceleration feedback to adjust the left-right distribution. The resulting system shows a significant improvement over conventional driveline configurations under aggressive cornering acceleration on a high-μ surface. The performance approaches the theoretical limit for these conditions. In the medium term, such a system is only likely to be economically viable for premium vehicles. However, a future revolution of powertrain technology towards, for example, wheel-mounted motors, could realize these handling benefits far more widely.     

Comparison of trends in tributyltin concentrations among three monitoring programs in the United States

The results of three national monitoring programs in the United States (U.S.) that measure concentrations of tributyltin (TBT) are compared. Regional and site comparisons are made of changes in TBT concentrations since passage of the Organotin Antifouling Paint Control Act (OAPCA) in 1988. The monitoring programs compared are the U.S. LongTerm Monitoring Program conducted by a consortium of tributyltin manufacturers, the National Oceanic and Atmospheric Administration's National Status and Trends Mussel Watch project, and the U.S. Navy's TBT monitoring program. All of the monitoring results demonstrate declining TBT concentrations over time. These declines have occurred rapidly (within a few years) and are considerable (56%–71% decrease in TBT concentrations in water, 47%–55% decrease in sediments, and 40%–82% decrease in bivalve tissues). Mean TBT concentrations in water are generally below the current U.S. Environmental Protection Agency marine chronic water quality criterion of 10ng/L. These results indicate that the OAPCA has been effective in reducing TBT concentrations in the aquatic environment.     

Adapting to Catch Shares: Perspectives of West Coast Groundfish Trawl Participants

Abstract

Catch share programs are used in fisheries management to meet goals such as species recovery, overcapacity reduction, and economic efficiency. Anticipated impacts include fleet consolidation, infrastructure reduction, and social disruption within communities. The Pacific Coast Groundfish Fishery Social Study (PCGFSS) aims to understand social changes related to the recently implemented West Coast Groundfish Trawl Catch Share Program. In this article, we use a subset of PCGFSS data to explore the ways remaining fishery participants have thus far adapted to catch shares. While some vessels have left the fishery, we found that many participants are adapting to this catch shares program despite challenges. Quota leasing strategies, fishery diversification, gear innovation, and community quota funds are some of the tools participants are using to continue operating under the catch shares program. These early challenges and adaptations to the catch share program are worthy of continued tracking, as researchers, managers, and fishing communities, would benefit by considering first-hand perspectives of the on-the-ground realities of harvesting groundfish in the rationalized fishery.     

Driver recruitability for advanced traveler information system experiments

A number of Advanced Traveler Information System (ATIS) field experiments are being undertaken to study the effectiveness of the ATIS concept in ameliorating traffic congestion and reducing delays. Many of these experiments require the participation of private drivers willing to allow in-vehicle navigation units to be installed in their vehicles over an extended period of time. A critical part of any ATIS field experiment is the selection or recruitment of private drivers to fulfill the multi-purpose participation needs of the ATIS experiment. To provide an informed basis for designing such a driver recruitment effort, it is important to understand the factors affecting driver recruitability or “willingness to participate.” This research presents the results of a quantitative analysis of driver recruitability conducted to aid in the design of recruitment procedures for ADVANCE (Advanced Driver and Vehicle Advisory Navigation Concept), the largest ATIS field experiment of its kind. The approach used a telephone survey to assess driver willingness to participate in the ADVANCE field experiment and to explore variations in that willingness among different drivers and across characteristics of the ADVANCE system and experimental design. The results indicate that the willingness to participate in the ADVANCE field test is greater for men, persons who hold executive or managerial occupations, individuals who drive extensively, persons who use electronic devices such as personal computers and car phones regularly, and persons who have positive beliefs regarding the usefulness of the ADVANCE concept. The result also suggest that drivers' willingness to participate is not strongly affected by monitoring/reporting requirements such as responding to surveys, mailing electronically stored records of system operation, and periodic service requirements. However, the willingness decreases considerably if drivers have to bear the financial responsibility for damage of the navigation equipment and any equipment-caused electrical failures to the car. Finally, the incentive of a lottery prize raises the level of participation willingness. These results have important implications for the recruitment effort, both in terms of recruiting drivers for participation in the demonstration and specifying the operational details of the field test.