Estimating potential reductions in externalities from rail-road substitution in Trans-European freight transport corridors

This paper develops a method for analysing and estimating savings in externalities that could be achieved by substituting truck with rail freight services in a given Trans-European freight transport corridor. The externalities affected include energy consumption, emissions of greenhouse gases, noise, congestion, and traffic incidents/accidents. The European Commission transport policy aims to provide an institutional framework for the medium- to long-term sustainable development of the transport sector. An important aspect of this policy is to stimulating the modal shift from truck to rail freight transport in inland Trans-European corridors.     

A practical capacity model of a single track line

The paper presents a model for determining the practical capacity of a single track line, i.e. the maximum number of trains which can be run along it in a time unit under the condition that each train enters its bottleneck segment with a definite delay.

The input data used in the model are: geometrical characteristics of the bottleneck segment of the line under study, the intensity and structure of demand expressed by a number of trains which are run over the line in a given time unit, the scenario of traffic running over the line under study and the operational tactics of individual train categories processing on the bottleneck segment.

(Two tactics can be applied in the train processing on the line under study; first, the trains of individual categories are given different priorities in the processing, and second, all the trains have the same priority).

The output results of the model are average delays of trains of each category occurring within the train processing performed on the bottleneck segment of the line under study in a given time unit.     

An assessment of the performance of the European long intermodal freight trains (LIFTS)

Intermodal rail/road freight transport has always been considered as a competitive alternative to its road freight counterpart in the European medium- to long-distance corridors (markets). Such consideration has been based on the increasing competitiveness of some innovative rail services and the existing and prospective performance of both modes in terms of the full social – internal or operational and external – costs. The most recent innovation of rail technologies and related services launched by some European railway companies, still at the conceptual level, is the Long Intermodal Freight Train (LIFT). This is supposed to be a block train operating in long-distance corridors (markets) with a substantial and regular freight demand.This paper develops analytical models for assessing the performance of the LIFTs, the already-operating Conventional Intermodal Freight Trains (CIFTs), and their road counterpart as well. The performance consists of the full – internal (private) and external – costs of the door-to-door delivery of loading units – containers, swap-bodies, and semi-trailers. The internal costs embrace the operational costs of the transport (rail and road) and intermodal terminal operators. The external costs include the costs of the impacts of door-to-door delivery of loading units on society and the environment. These negative externalities include noise, air pollution, traffic accidents, and congestion.The models are applied to a simplified version of intermodal and road transport system using inputs from the European freight transport sector. The aims are to compare the full costs of particular modalities in order to investigate the potential of the LIFTs as compared with the CIFTs in improving the internal efficiency of the rail freight sector and its competitiveness with respect to its road counterpart. In addition, the paper attempts to assess some effects on the potential modal shift of EU (European Union) transport policies on internalizing transport externalities.     

Transient Properties of a Magnetorheological Damper - Discussion to the Paper by Seung-Bok et al.: "H∞ Control Performance of a Full-Vehicle Suspension Featuring Magnetorheological Dampers"

A discussion in terms of dynamic properties of a magnetorheological damper is lead to those in the denoted paper. Results of experimental evaluation of the properties of a commercially available magnetorheological damper are presented. A possibility of use of the damper in practical applications is also considered.     

Quantitative evaluation of passenger terminal orientation

When passenger terminal layout is being decided, one of the important aspects to consider is how the passenger orients himself during his visit to the terminal and his movements through it, i.e. terminal orientation. Among other things, this terminal characteristic results from visibility, or the visual connectivity between elements and spaces. The paper proposes an amendment and modification to the known method for the quantitative evaluation of terminal orientation which uses an oriented network to describe the connectivity of elements (terminal orientation). The amendment and modification of the method consists of proposing that during evaluation only visual connections that have functional meaning should be considered, rather than all visual connections. A further modification is the introduction of different weights for different connections. The example presented in the paper considers an airport terminal building.     

Light Rail Rapid Transit systems for more sustainable ground accessibility of airports

This paper investigates the potential of Light Rail Rapid Transit (LRRT) to mitigate the environmental and social burden of ground access systems of an airport. This implies, on the one hand, LRRT's capability in mitigating externalities in terms of noise, air pollution/climate change, traffic incidents/accidents and congestion of airport ground access systems and, on the other, the provision of sufficient capacity to accommodate generally increasing volumes of both air passenger and airport employee demand by connecting the airport to its core catchment area. A methodology for assessing the capability of LRRT operating as an airport ground access system is developed. This methodology consists of models to analyze and predict demand and capacity for an LRRT system and models to quantify the externalities of particular airport ground access systems as well as assessing their prospective savings thanks to the introduction of an LRRT system. The methodology is applied to a large European airport – Amsterdam Schiphol (the Netherlands) – using a ‘what-if?’ scenario approach.     

A GIS‐based traffic analysis zone design: implementation and evaluation

The purpose of this paper is to implement an efficient method for GIS‐based traffic analysis zone (TAZ) design in order to evaluate and validate such a method. The method was developed by the authors.

Moran's I spatial autocorrelation coefficient and sample variance are used for evaluating the generated TAZs using the Champaign‐Urbana, IL region as a case study. Sensitivity analysis is also conducted to explore the fluctuations in TAZ generation outcomes. The evaluation, the validation as well as the TAZ design have been implemented with ARC/INFO GIS software on a UNIX workstation platform.     

Assigning fighter plane formations to enemy aircraft using fuzzy logic

Fighter aircraft protect specific facilities on alert in the air by patrolling expectation zones. These zones are located in the direction from which enemy aircraft attacks are expected; fighter formations are sent from them to intercept enemy aircraft. The problem considered in this paper is to determine the optimum assignment of fighter plane formations to enemy formations. The proposed solution is based on fuzzy logic and integer linear programming. A numerical example is given to illustrate the application possibilities of the proposed solution.     

Monolithic coupling of the pressure and rigid body motion equations in computational marine hydrodynamics

In Fluid Structure Interaction(FSI) problems encountered in marine hydrodynamics, the pressure field and the velocity of the rigid body are tightly coupled. This coupling is traditionally resolved in a partitioned manner by solving the rigid body motion equations once per nonlinear correction loop, updating the position of the body and solving the fluid flow equations in the new configuration. The partitioned approach requires a large number of nonlinear iteration loops per time–step. In order to enhance the coupling, a monolithic approach is proposed in Finite Volume(FV) framework,where the pressure equation and the rigid body motion equations are solved in a single linear system. The coupling is resolved by solving the rigid body motion equations once per linear solver iteration of the pressure equation, where updated pressure field is used to calculate new forces acting on the body, and by introducing the updated rigid body boundary velocity in to the pressure equation. In this paper the monolithic coupling is validated on a simple 2D heave decay case. Additionally, the method is compared to the traditional partitioned approach(i.e. "strongly coupled" approach) in terms of computational efficiency and accuracy. The comparison is performed on a seakeeping case in regular head waves, and it shows that the monolithic approach achieves similar accuracy with fewer nonlinear correctors per time–step. Hence, significant savings in computational time can be achieved while retaining the same level of accuracy.     

Small Vibrations of Nonlinear Dynamic Systems Containing Non-Rigid Bodies Excited by Stationary Stochastic Processes

From a vibrational point of view, real vehicles form dynamic systems containing non-rigid bodies and nonlinear two-force elements, often excited by stationary random processes. Their theoretical investigation in a broader frequency range is practically possible in the frequency domain only. In the treatment of nonlinearities second-order stochastical linearization methods can be used advantageously. The amount of necessary computations can be vastly reduced by using known receptance matrices of all bodies in the system in its equations of motion after Fourier transformation. The article describes the receptance properties of non-rigid bodies, their use for the determination of the dynamic system's transfer functions and the determination of the output processes' spectral density matrix under stationary random external excitation using stochastical second-order linearization of the nonlinearities.