The use of gait parameters to evaluate pedestrian behavior at scramble phase signalized intersections

Pedestrian scramble phasing is usually implemented to reduce pedestrian‐vehicle conflicts and therefore increase the safety of the intersection. However, to adequately determine the benefits of scramble phasing, it is necessary to understand how pedestrians react to such an unconventional design. This study investigates changes in pedestrian crossing behavior following the implementation of a scramble phase by examining the spatiotemporal gait parameters (step length and step frequency). This detailed microscopic‐level analysis provides insight into changes in pedestrian walking mechanisms as well as the effect of various pedestrian and intersection characteristics. The study uses video data collected at a scramble phase signalized intersection in Oakland, California. Gait parameters were found to be influenced by pedestrian gender, age, group size, crosswalk length, and pedestrian signal indications. Both average step length and walking speed were significantly higher for diagonally crossing pedestrians compared with pedestrians crossing on the conventional crosswalks. Pedestrians were found to have the tendency to increase their step length more than their step frequency to increase walking speed. It was also found that, compared with men, women generally increase their walking speed by increasing their step frequency more than step length. However, when in non‐compliance with signal indications, women increase their walking speed by increasing their step length more than step frequency. It was also found that older pedestrians do not significantly change their walking behavior when in non‐compliance with signal indications. Copyright © 2014 John Wiley & Sons, Ltd.     

Operational performance comparison of four unconventional intersection designs using micro‐simulation

Several unconventional intersection designs have been proposed as an innovative approach to mitigate congestion at heavily congested at‐grade signalized intersections. Many of these unconventional designs were shown to outperform conventional intersections in terms of the average control delay and the overall intersection capacity. Little research has been conducted to compare the performance of these unconventional intersections to each other under different volume conditions. This study evaluated and compared the operational performance of four unconventional intersection schemes: the crossover displaced left‐turn (XDL), the upstream signalized crossover (USC), the double crossover intersection (DXI) (i.e., half USC), and the median U‐turn (MUT). The micro‐simulation software vissim (PTV Planung Transport Verkehr AG, Karlsruhe, Germany) was used to model and analyze the four unconventional intersections as well as a counterpart conventional one. The results showed that the XDL intersection constantly exhibited the lowest delays at nearly all tested balanced and unbalanced volume levels. The operational performance of both the USC and the DXI was similar in most volume conditions. The MUT design, on the other hand, was unable to accommodate high approach volumes and heavy left‐turn traffic. The capacity of the XDL intersection was found to be 99% higher than that of the conventional intersection, whereas the capacity of the USC and the DXI intersections was about 50% higher than that of the conventional intersection. The results of this study can provide guidance on choosing among alternative unconventional designs according to the prevailing traffic conditions at an intersection. Copyright © 2012 John Wiley & Sons, Ltd.     

Upwelling mechanisms in the northwestern Alboran Sea

From April 1996 to July 1997, a series of hydrographic surveys were carried out in the Northwestern part of the Alboran Sea to investigate the upwelling that is an almost permanent feature in this area. Simultaneously a mooring line was deployed in the north part of the eastern section of the Strait of Gibraltar to monitor the variability of the Atlantic Jet (AJ). Two mechanisms are shown to be relevant for the upwelling dynamic in the region: the southward drifting of the AJ and wind stress. A linear relation between the angle under which the Jet enters the Alboran Sea and the distance from the coastline to the front associated with the Jet has been found. This angle that has been estimated from the low passed time series of current velocity measured by the uppermost instrument of the moored line has been then used to identify the onshore–offshore excursions of the Jet. Both upwelling mechanisms are identified from hydrographic data, because each of them has associated a different type of water mass, and they take place in different locations. Wind-driven upwelling dominates in coastal zones, on the shelf, while upwelling associated with southward drifting of the AJ prevails further offshore. The amount of sub-surface water brought up to the surface by each one is of the same order. However, wind-driven upwelling contributes to the fertilization of this region in a major extent because water upwelled by wind is richer in nutrient concentration.     

NUMERICAL AND EXPERIMENTAL SURVEY OF CENTRIFUGAL MACHINE COMPONENTS

IntroductionCentrifugal machines are used in a wide vari-ety of products ranging from conventional waterpumps to blood pumps and space shuttle main en-gine fuel and oxidizer pumps,from squirrel cagefans to high pressure ratio gas turbine compres-sors,from tiny cryo- cooler compressors to largeindustrial petrochemical compressor stations.Thefirst centrifugal impeller with ten wooden doublecurved blades and dating back to the fifth centurywas found in 1 772 in an abandoned Portuguesecopper mine …     

A comparison between PARAMICS and VISSIM in estimating automated field‐measured traffic conflicts at signalized intersections

The main objective of this study is to investigate the relationship between field‐measured conflicts and simulated conflicts estimated from microsimulation model (PARAMICS) using the surrogate safety assessment model. An urban signalized intersection was selected for analysis. Automated video‐based computer vision techniques were used to identify field conflicts. The applicability of a two‐step model calibration procedure applied to VISSIM in a recent study was investigated using PARAMICS. In the first calibration step, the PARAMICS model was calibrated to ensure that the simulation gives reasonable results of average delay times. The second calibration step used a genetic algorithm procedure to calibrate PARAMICS parameters to enhance the correlation between simulated and field‐measured conflicts. Finally, the results obtained from PARAMICS were compared with results obtained from VISSIM. The comparison included three aspects: (i) the car‐following model and safety‐related parameters; (ii) the correlation between simulated and field‐measured conflicts; and (iii) the conflict spatial distributions. The results show that the default simulation model parameters give poor correlation with the field‐measured data, and therefore, using simulation models without a proper calibration should be avoided. Overall, good correlation between field‐measured and simulated conflicts was obtained after calibration for both models, especially at higher time‐to‐collision (TTC) values. At TTC threshold of 1.5 s, PARAMICS overestimates the number of conflicts and VISSIM underestimates it. Both models overestimated the number of conflicts at TTC threshold of 3.00 s. There were major differences between field‐measured and simulated conflicts spatial distributions for both simulation models. This indicates that despite the good correlation obtained from the calibration process, both PARAMICS and VISSIM do not capture the actual conflict occurrence mechanism. Copyright © 2016 John Wiley & Sons, Ltd.     

Developing evasive action‐based indicators for identifying pedestrian conflicts in less organized traffic environments

There has been a growing interest in using surrogate safety measures such as traffic conflicts to analyse road safety from a broader perspective than collision data alone. This growing interest has been aided by recent advances in automated video‐based traffic conflict analysis. The automation enables accurate calculation of various conflict indicators such as time‐to‐collision and post‐encroachment time. These indicators rely on road users getting within specific temporal and spatial proximity from each other and therefore assume that proximity is a surrogate for conflict severity. However, this assumption may not be valid in many driving environments where close interactions between road users are common. The objective of this paper is to investigate the applicability of time proximity conflict indicators for evaluating pedestrian safety in less‐organized traffic environments with a high mix of road users. Several alternative behavioural conflict indicators based on detecting pedestrian evasive actions are recommended to better measure traffic conflicts in such traffic environments. These indicators represent variations in the spatio‐temporal gait parameters (step length, step frequency and walk ratio) immediately before the conflict point. A highly congested shared intersection in Shanghai, China, with frequent pedestrian conflicts is used as a case study. Traffic conflicts are analysed with the use of automated video‐based analysis techniques. The results showed that evasive action‐based indicators have higher potential to identify pedestrian conflicts and measure their severity in high mix less organized traffic environments than time proximity measures such as time‐to‐collision and post‐encroachment time. Copyright © 2016 John Wiley & Sons, Ltd.     

Validation of an agent-based microscopic pedestrian simulation model in a crowded pedestrian walking environment

This study validates a recently developed agent-based pedestrian micro-simulation model in a crowded walking environment. The model is applied to simulate pedestrian movements at a major street in the downtown Vancouver area. The street was closed for traffic to allow people attending a social event to leave the area safely. The calibration of model parameters is conducted using a Genetic Algorithm that minimizes the error between simulated and actual trajectories, acquired by means of computer vision. Validation results confirm the accuracy of the simulated trajectories, as the average error between the actual and simulated trajectories is found to be 0.28?m, and the average error in walking speed is just 0.06 m/s. Furthermore, results show that the model is capable of reproducing the actual behavior of pedestrians during different interactions with high accuracy (more than 94% for most interactions).     

Unconventional USC intersection corridors: evaluation of potential implementation in Doha,Qatar

Unconventional intersection designs have been recently proposed as a new approach to deal with heavy left turns at signalized intersections. One of these unconventional schemes, the Upstream Signalized Crossover (USC) intersection, was shown to significantly reduce average vehicle delays; particularly when the volumes entering the intersection are relatively high. The Ministry of Public Works of Qatar is considering the implementation of the USC intersection on three signalized intersections along a major urban corridor in Doha. This paper investigates the potential improvements associated with the USC implementation. VISSIM was used to analyze the proposed USC intersections and the existing conventional intersections. Analyses were carried out for AM , Midday, and PM peak hours. The results showed that most of the travel time measurement sections experienced lower delays in the USC configuration for the three peak periods. As well, the total system delay, in hours, for the USC configuration was less than that of the conventional configuration by 19.4, 14.8, and 13.6% for the AM , Midday, and PM peaks, respectively. The average control delay for each single USC intersection was lower than its conventional counterpart by between 7.6 and 22.9%. Copyright © 2010 John Wiley & Sons, Ltd.     

Computer vision approach for the classification of bike type (motorized versus non‐motorized) during busy traffic in the city of Shanghai

This article describes a novel approach for the binary classification of two‐wheeler road users in a dense mixed traffic intersection. The classification is a supervised procedure to differentiate between motorized and non‐motorized (human‐powered) bikes. Road users were first detected and tracked using object recognition methods. Classification features were then selected from the collected trajectories. The features include maximum speed, cadence frequency in addition to acceleration‐based parameters. Experiments were conducted on a video data set from Shanghai, China, where cyclists as well as motorcycles tend to share the main road facilities. A sensitivity analysis was performed to assess the quality of the selected features in improving the accuracy of the classification. A performance analysis demonstrated the robustness of the proposed classification method with a correct classification rate of up to 93%. This research contributes to the literature of automated data collection and can benefit the applications in many transportation‐related fields such as shared space facility planning, simulation models for two‐wheelers, and behavior analysis and road safety studies. Copyright © 2015 John Wiley & Sons, Ltd.     

About the seasonal variability of the Alboran Sea circulation

Data from a mooring line deployed midway between the Alboran Island and Cape Tres Forcas are used to study the time variability of the Alboran Sea from May 1997 to May 1998. The upper layer salinity and zonal velocity present annual and semiannual cycles characterised by a minimum in spring and autumn and a maximum in summer and winter. Temperature has the opposite behaviour to that of salinity indicating changes in the presence of the Atlantic water within the Alboran Passage. A large set of SST images is used to study these cycles. The decrease of salinity and velocity in our mooring location in spring and autumn seems to be related to the eastward drifting of the Western Alboran Gyre (WAG). The increase of salinity and velocity is caused by the Atlantic current flowing south of the Alboran Island and its associated thermohaline front. Conductivity–temperature–depth (CTD) data from two cruises along the 3°W are coherent with current meters and SST interpretations.During the period analysed, summer months are characterised by the stability of the two-gyre system, while in winter, the circulation is characterised by a coastal jet flowing close to the African shore. We use sea level differences across the Strait of Gibraltar for studying the variability of the Atlantic inflow. We discuss the changes in the Alboran Sea circulation and its relation with the variability of the inertial radius of the Atlantic inflow. Though our results are speculative, we find a possible relation between the disappearance of the two-gyre system and a reversal of the circulation in Gibraltar. Longer time series are needed to conclude, but comparison with previous works makes us think that the seasonal cycle described from May 1997 to May 1998 could be the most likely one for the Alboran Sea upper layer.