Certification criteria in type I ecolabelling related to metals for sustainable materials management

A sustainable materials management for metals should be achieved to conserve resources of metal minerals. For the sustainable materials management, material flows through the whole life cycle of materials have been recognized by material flow analysis (MFA) studies. Former MFA studies pointed out that cyclic use of metals could be enhanced not only by increasing quantity of recovered scrap but also by upgrading quality of the scrap. In general, the quality is degraded by contaminants which commingle at disassembling processes. The mixture of contaminants depends on usage of materials in products. Here, Type I ecolabelling has a potential to convey messages for avoiding mixture of contaminants to the producers of finished products. In this study, on the basis of a survey on existing certification criteria related to metals in the world, a general concept of certification criteria on sustainable materials management for metals in Type I ecolabelling system is proposed. Finally, we propose six criteria in the form of certification criteria in Type I ecolabelling system.     

Evaluation of expected maximum values of forces acting on containers and lashing rods on a container ship

The appearance of a number of large container ships in the 8000 TEU range raises the importance of a plan for container lashing arrangements on deck in relation to the design of the ship. Therefore, it is expected that a new method for evaluating the lashing arrangements on deck will be introduced which is applicable regardless of the ship's size and the lashing pattern, instead of using the standards of several different societies, as happens at present. To evaluate the lashing arrangements on deck, the expected maximum values of the forces acting on the containers and lashing rods should be evaluated. This paper presents a new method of evaluating the container lashing arrangements on a container ship using an "acceleration ellipsoid." The applicability of the acceleration ellipsoid to an evaluation of the expected maximum values of the forces was examined by comparing the expected maximum values of the forces calculated by the long-term distribution calculation known as the "Fukuda method," to those calculated using the acceleration ellipsoid. By comparing these results, it was confirmed that the expected maximum values of the forces calculated using the acceleration ellipsoid were not less than those calculated through by the long-term distribution calculation. It is concluded that the acceleration ellipsoid can be used to evaluate the expected maximum values of the forces acting on containers and lashing rods. Received: December 14, 2000 / Accepted: March 22, 2001     

Environmental factors which affect growth of Japanese common squid, Todarodes pacificus, analyzed by a bioenergetics model coupled with a lower trophic ecosystem model

Bioenergetics model is applied to Japanese common squid, Todarodes pacificus. The temporal change of wet weight of common squid, which migrates in the Sea of Japan, is simulated. The time dependent horizontal distribution of prey is calculated a priori by 3-D coupled physical–biological model. The biological model NEMURO (North Pacific Ecosystem Model for Understanding Regional Oceanography) is used to simulate the lower-trophic ecosystem including three kinds of zooplankton biomass two of which is used as prey of common squid. A bioenergetics model reproduced appropriate growth curve of common squid, migrating in the North Pacific and the Sea of Japan. The results show that the wet weight of common squid in the northern Sea of Japan is heavier than that migrating in the central Sea of Japan, because prey density of the northern Sea of Japan is higher than that of the central Sea of Japan. We also investigate the wet weight anomaly for a global warming scenario. In this case, wet weight of common squid decreases because water temperature exceeds the optimum temperature for common squid. This result indicates that migration route and spawning area of common squid might change with global warming.     

Prediction of Rain Groove Wandering

Summary A new theory to predict rain groove wandering was proposed in which the effect of pattern geometry, sipes, tread stiffness and pitch length on rain groove wandering could be predicted. The mechanism of rain groove wandering was explained by the residual lateral force generated at the interface of tire and road due to rain groove. The peak to peak value of the residual force F pp was found out as the criteria of rain groove wandering and the correlation of F pp and subjective feeling was 0.9, even though complicated practical patterns were included in this correlation study.     

Analysis of hydrodynamic characteristics for arbitrary multihull ships advancing in waves

Multihull vessels have emerged as popular alternatives to conventional monohull ships for high-speed crafts. However, the bridging structures connecting the hulls are vulnerable to various wave actions and the wave impact on the bottom of them is the most serious problems associated with multihulled vessels. In this study, prediction of relative wave elevations under the bridging structures is investigated for multihull ships traveling with forward speed in waves. A computer code YNU-SEA using the three-dimensional (3D) Green function method with forward speed has been developed and used to analyze the hydrodynamic radiation and diffraction forces and motion responses for high-speed catamarans in waves. The results of the present calculations are compared with those of previous calculations as well as with experimental results. The numerical results reveal that the present computer code can be used as a powerful tool for the accurate numerical computation of seakeeping problems for multihull ships advancing in waves. Numerical calculations of wave pattern are also carried out including wave interactions between the hulls to analyze the effects of hull form on the free surface flow around catamarans advancing in waves. The analysis of the wave pattern allows the determination of relative wave height including radiation and diffraction waves. Finally, some discussions are included based on these numerical results which may be helpful for the accurate prediction of relative wave height and wave breaking load on the deck associated with multihull ships.     

EXPRESSION OF PCNA，P53，KI－67，EGFR AND ONCOGEN CerbB－2 IN HUMAN SUPERFICIAL SQUAMOUS CELL CARCINOMA OF ESOPHAGUS

ＥＸＰＲＥＳＳＩＯＮＯＦＰＣＮＡ，Ｐ５３，ＫＩ－６７，ＥＧＦＲＡＮＤＯＮＣＯＧＥＮＣｅｒｂＢ－２ＩＮＨＵＭＡＮＳＵＰＥＲＦＩＣＩＡＬＳＱＵＡＭＯＵＳＣＥＬＬＣＡＲＣＩＮＯＭＡＯＦＥＳＯＰＨＡＧＵＳＺｈａｎｇＪｕｎ（张军）ＨｉｒｏｙａｓｕＭａｋｕｕｃｈ...