Wave impact on a horizontal elastic plate

The objective is to find slamming-induced local stresses in the steel or aluminum wetdeck of a multihull vessel. This is studied theoretically by representing the wetdeck as a beam model and accounting for dynamic hydroelastic effects. Two numerical methods are used, one being a simplified asymptotic solution. Satisfactory agreement between the two methods is reported. Experimental drop tests of horizontal elastic plates of steel and aluminum are also reported, and the results from the experiments agree well with the numerical computations. This study reveals, both numerically and experimentally, that slamming-induced local stresses are strongly influenced by dynamic hydroelastic effects. The maximum bending stresses are insensitive to where waves hit, the curvature of the waves, and maximum pressures. Measured maximum pressures are very sensitive to external conditions, and cannot be used as a measure of maximum local bending stresses. A simple procedure for local design stresses due to wetdeck slamming is outlined.     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Using multiple hybrid spatial design network analysis to predict longitudinal effect of a major city centre redevelopment on pedestrian flows

Transportation - Predicting how changes to the urban environment layout will affect the spatial distribution of pedestrian flows is important for environmental, social and economic sustainability....     

Impacts of urban built environment on empty taxi trips using limited geolocation data

This study identifies the determinants of the empty taxi trip duration (ETTD) by combining three high-resolution databases—geolocation data in New York City, geodatabase of urban planning data, and transportation facilities data. Considering the nature of duration data, hazard-based duration model is proposed to explore the relationships between causal factors and ETTD, coupling with three variations of baseline hazard distribution, i.e., Weibull distribution with heterogeneity, Weibull distribution, and log-logistic. Furthermore, the likelihood ratio test is presented to implement comparisons of three baseline hazard distributions, as well as spatial and temporal transferability of causal factors. The results show significant complementary effects by subway system and competitive effects by city bus and bicycling system, as well as significant impacts of trip length, airport trip, average annual income, and employment rate. Urban built environment, for instance, density of road, public facilities, and recreational sites and ratio of green space, has various impacts on ETTD. The elasticity estimations confirm significant spatial and temporal heterogeneity in impacts on ETTD. In addition, the analysis on elasticity also reveals the considerable impacts of severe traffic congestion on ETTD within Manhattan. The modeling can assist stakeholders in understanding empty taxi movements and measuring taxi system efficiency in urban areas.     

Urban sports anglers and Lake Michigan fishery policies

Abstract

Over the past few years an unusually intense struggle over the future of the Lake Michigan fishery has occurred in the coastal communities of Racine and Kenosha. This struggle has engaged participants on the local, state, and national levels in the debate over the fishery as it is potentially impacted by the presence of environmental toxins, the rising cost of fish stocking and management, and conflicting user group demands. We describe three cases where urban sports anglers, with the assistance of university based social scientists, participated in state and city public policy decisions. After discussing this research and its policy implications, we propose a general public participation paradigm termed the Reciprocal Development Model.     

In situ colonization of marine biofilms on UNS S32760 duplex stainless steel coupons in areas with different water qualities: Implications for corrosion potential behavior

In the presence of biofilms, stainless steels （SS） exhibits an increase in corrosion potential, called ennoblement. In the present study, the corrosion potential （Eco,） behavior of the duplex SS UNS S32760 was recorded simultaneously with the in situ marine biofilm formation in two areas at Arraial do Cabo, Southeastern Brazil. The biofilm at Forno Harbor （an anthropogenically disturbed area） was characterized by higher relative abundances of Bacteria at day 2, followed by diatoms （especially Navicula sp.） on day 10 and dinoflagellates on day 18, whereas no clear trend was recorded at Cabo Frio Island （an undisturbed area）. The ennoblement of Ecor values was site-dependent. In a complementary laboratory assay, biofilms were removed and the Eco values registered in sterile conditions for the subsequent 10 days and corroborated in situ results. Understanding biofilms and SS interactions has important implications for materials science and engineering decisions as well as helping to fill in imnortant gaps in this knowledge.     

Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

Model-based analysis of the mechanical subsystem of an air brake system

Most commercial vehicles such as buses and trucks use an air brake system, often equipped with an S-cam drum brake, to reduce their speed and/or to stop. With a drum brake system, the clearance between the brake shoe/pad and the brake drum may increase because of various reasons such as wearing of the brake shoe and/or brake drum and drum expansion caused by high heat generation during the braking process. Hence, to ensure proper functioning of the brake system, it is essential that the clearance between the brake shoe and the brake drum is monitored. In this paper, we present a mathematical model for the mechanical subsystem of the air brake system that can be used to monitor this clearance. This mathematical model correlates the push rod stroke transients and the brake chamber pressure transients. A kinematic analysis and a dynamic analysis of the mechanical subsystem of the air brake system were performed, and the results are corroborated with experimental data.     

Finite element modeling of static tire enveloping characteristics

To investigate static tire enveloping characteristics, a three dimensional (3-D) finite element model is proposed. The vertical stiffness of the tire is studied on a flat surface with and without cleat. Tire rubber materials and cord layers are represented independently using “rebar” elements available in MSC Marc Mentat. Comparisons of numerical and experimental results are given to show the validity of the proposed model. It is shown that after a certain displacement, the results of the proposed model agree well with experimental results. In addition, the model results show that regardless of the type of the cleat placed under the rim center (hub center), all vertical force curves intersect after a certain displacement, which indicates typical static enveloping characteristics. Moreover, another typical characteristic of the radial tires that is unlike those of bias-ply constructions confirms that the contact patch does not expand laterally after a level vertical load is applied to the tire, which is directly related to fuel consumption and tire tread life.