Fuzzy Logic Active and Semi-Active Control of Off-Road Vehicle Suspensions

For off-road vehicles, minimizing the absorbed power is the main objective of suspension control. The primary cause of increase in the absorbed power in off-road vehicles driven at high speeds on harsh courses is the exhaustion of the suspension travel. Fuzzy-logic approach to active and semi-active off-road vehicle suspension control, with the goal of improving the speed of the vehicle over rough terrains are developed. The ride metric used for quantifying improvements is the absorbed power of the sprung mass. Particular attention is paid to the proper modeling of the suspension using both the full kinematic constraints and the more convenient two degree of freedom linear model of the quarter vehicle suspension. The nonlinearities due to the kinematic constraints on motion are accounted for by modifying the stiffness and damping coefficients of the suspension spring and dashpot in the linear model. The control laws are developed using the less complex model and demonstrated in the fully constrained environment. Nonlinearities of the suspension, including tire stiffness/damping and bumpstops are included at all stages of controller development.     

Response spectrum method for extreme wave loading with higher order components of drag force

Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass attached to a light cantilever cylinder and their corresponding deformation response spectra are estimated by utilizing a generalized single degree of freedom system. Based on the wave data recorded in the Persian Gulf region, extreme wave loading conditions corresponding to different return periods are exerted on the offshore structures. Accordingly, the effect of the higher order components of the drag force is considered and compared to the linearized state for different sea surface levels. When the fundamental period of the offshore structure is about one third of the main period of wave loading, the results indicate the linearized drag term is not capable of achieving a reliable deformation response spectrum.     

A parametric study on water-entry of a twin wedge by boundary element method

High speed catamarans are used for pleasure, racing as well as passenger transportations. Optimal design of these crafts requires knowledge of sea loads exerted on their structures. The total load may be estimated by integration of loads exerted on a series of two-dimensional sections along the hull. In order to access the cross-sectional loads, the problem may be simplified to solve the water-entry problem of a twin hull. In this paper, water-entry problem of a twin wedge at constant vertical water-entry speed is studied. The problem is solved in the framework of potential theory using boundary element method where gravity effect on the flow is neglected. A simplified model based on Wagner theory is employed. Free surface elevation and pressure distribution on the body in different deadrise angles have been evaluated. A parametric study has been done to investigate effects of deadrise angle, distance between demi-hulls and free surface elevation on maximum pressure coefficient. Finally, a regression formula for maximum pressure coefficient has been proposed. Results of parametric study reveal that as time advances the interaction between two demi-hull gets more severe, besides the interaction effect on pressure coefficient is nonlinear.     

Vehicle mass as a determinant of fuel consumption and secondary safety performance

One interaction between environmental and safety goals in transport is found within the vehicle fleet where fuel economy and secondary safety performance of individual vehicles impose conflicting requirements on vehicle mass from an individual’s perspective. Fleet characteristics influence the relationship between the environmental and safety outcomes of the fleet; the topic of this paper. Cross-sectional analysis of mass within the British fleet is used to estimate the partial effects of mass on the fuel consumption and secondary safety performance of vehicles. The results confirmed that fuel consumption increases as mass increases and is different for different combinations of fuel and transmission types. Additionally, increasing vehicle mass generally decreases the risk of injury to the driver of a given vehicle in the event of a crash. However, this relationship depends on the characteristics of the vehicle fleet, and in particular, is affected by changes in mass distribution within the fleet. We confirm that there is generally a trade-off in vehicle design between fuel economy and secondary safety performance imposed by mass. Cross-comparison of makes and models by model-specific effects reveal cases where this trade-off exists in other aspects of design. Although it is shown that mass imposes a trade-off in vehicle design between safety and fuel use, this does not necessarily mean that it imposes a trade-off between safety and environmental goals in the vehicle fleet as a whole because the secondary safety performance of a vehicle depends on both its own mass and the mass of the other vehicles with which it collides.     

Post-buckling behaviour and strength of multi-stiffened aluminium panels under combined axial compression and lateral pressure

This paper presents the results of complementary numerical study done in the continuation of the activities carried out by the Committee III.1 “Ultimate Strength” of ISSC'2003 (Ref. [28] ).The main focus of the paper concerns the post-buckling behaviour and strength characteristics of the aluminium multi-stiffened panels under combined axial compression and lateral pressure.The finite element model proposed by the Committee III.1 “Ultimate Strength” of ISSC'2003 is used in the present investigation. Material is aluminium alloy AA6082-T6 and the multi-stiffened panel is a triple-span structure. Stiffeners are of either extruded or non-extruded angle-bar profiles. An initial deflection is imposed on the model in a procedure similar to that applied by the Committee III.1. General purpose finite element code ANSYS is used for non-linear elastic–plastic analyses.Main objectives are to study the influence of initial deflections and also HAZ on the post-buckling behaviour and collapse characteristics of aluminium stiffened panels under combined axial compression and lateral pressure. Different values of lateral pressure are exerted on the model in a systematic manner to simulate various levels of lateral pressure loading on multi-stiffened aluminium panels used in the construction of high-speed crafts.     

A multiobjective land development optimization model: the case of New Castle County,Delaware

This paper develops a multiobjective optimization model to consider transportation impacts of the future development of land. The output of the model is the best location and type of land use that has minimal negative transportation effects and uses the maximum available public transportation infrastructure. It provides tools for both planners and transportation engineers and enables them to consider different scenarios of possible policies and land development. Since multiple objectives and their nonlinear structures are considered, the model is solved using mixed integer nonlinear programming. The final results are shown in both tabular and graphical format. The effectiveness of the model is applied to the northern part of New Castle County, Delaware. The results show that the model successfully finds the best locations for both residential and commercial land uses in order to meet several criteria discussed in the paper.     

Epistemic-based investigation of the probability of hazard scenarios using Bayesian network for the lifting operation of floating objects

Owing to the increase in unprecedented accidents with new root causes in almost all operational areas, the importance of risk management has dramatically risen. Risk assessment, one of the most significant aspects of risk management, has a substantial impact on the system-safety level of organizations, industries, and operations. If the causes of all kinds of failure and the interactions between them are considered, effective risk assessment can be highly accurate. A combination of traditional risk assessment approaches and modern scientific probability methods can help in realizing better quantitative risk assessment methods. Most researchers face the problem of minimal field data with respect to the probability and frequency of each failure. Because of this limitation in the availability of epistemic knowledge, it is important to conduct epistemic estimations by applying the Bayesian theory for identifying plausible outcomes. In this paper, we propose an algorithm and demonstrate its application in a case study for a light-weight lifting operation in the Persian Gulf of Iran. First, we identify potential accident scenarios and present them in an event tree format. Next, excluding human error, we use the event tree to roughly estimate the prior probability of other hazard-promoting factors using a minimal amount of field data. We then use the Success Likelihood Index Method (SLIM) to calculate the probability of human error. On the basis of the proposed event tree, we use the Bayesian network of the provided scenarios to compensate for the lack of data. Finally, we determine the resulting probability of each event based on its evidence in the epistemic estimation format by building on two Bayesian network types: the probability of hazard promotion factors and the Bayesian theory. The study results indicate that despite the lack of available information on the operation of floating objects, a satisfactory result can be achieved using epistemic data.     

Experimental study on reflection coefficient of curved perforated plate

A set of experiments is carried out in a towing tank to study the effects of the curvature of perforated plates on the wave reflection coefficient (C _r ). The curvature of a perforated plate can be changed by rotating a reference perforated plate aboutits origin according to the parabolic equation y=?x ². A plunger-type wave maker is used to generate regular waves. The reflection coefficients are calculated using Goda and Suzuki’s (1976) method. The results are compared with those of vertical or sloped passive wave absorbers. The comparison shows that a perforated plate with a curved profile is highly efficient in terms of reducing the wave reflection coefficient. A correlation is established to estimate the reflection coefficient of curved perforated plates as a function of both flow and geometry characteristics.     

带有挡板的注液舱室地震响应分析（英文）

In thispaper, the effects of a rigid baffle on the seismic response of liquid in a rigid cylindrical tank are evaluated. A baffle is an annular plate which supplies a kind of passive control on the effects of ground excitation. The contained liquid is assumed incompressible, inviscid and has irrotational motion. To estimate the seismic response, the method of superposition of modes has been applied. To analyze the rigid tank response, Laplace's equation is considered as the governing equation of the fluid domain, in both time and frequency domains. The boundary element method(BEM) is employed to evaluate the natural modes of liquid in a cylindrical tank. To gain this goal, the fluid domain is divided into two upper and lower parts partitioned by the baffle. Linearized kinematic and dynamic boundary conditions of the free surface of the contained liquid have been considered.     

Ship Roll Analysis Using CFD-Derived Roll Damping:Numerical and Experimental Study

This study investigates the roll decay of a fishing vessel by experiments and computational fluid dynamics (CFD) simulations. A fishing vessel roll decay is tes...