Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

Strong bottom–up effects on phytoplankton community caused by a rainfall during spring and summer in Sagami Bay,Japan

To assess the consequences of bottom-up effects on phytoplankton community composition during the rainy season, phytoplankton levels and environmental factors were monitored daily from 12 April to 22 July 2003 in Sagami Bay, Japan. The relevant environmental factors were analyzed using cross-correlation analyses. Based on time-series analysis, low surface salinity conditions lasting 0 or 2 days after heavy rainfalls resulted in significant nutrient loading, such as dissolved inorganic nitrogen (DIN), into the coastal area. Also, Chlorophyll-a (Chl-a) concentration frequently increased 2 and 6 days after rainfall. Based on the high total Chl-a concentration, the time was divided into three periods, from 1 to 11 May (Period A), 26 May to 9 June (Period B) and 30 June to 22 July (Period C). The phytoplankton assemblages during Period A were dominated by two dinoflagellates, Ceratium furca and Ceratium fusus. Prior to these species blooming, the heterotrophic dinoflagellate Noctiluca scintillans was dominant. During Period B, the phytoplankton communities were dominated primarily by the diatoms Rhizosolenia delicatula, Hemiaulus sinensis and Navicula spp. Finally, Cerataulina dentata, Rhizosolenia spp., Lauderia borealis and Neodelphineis pelagica were dominant during Period C. After increases in phytoplankton abundance, available nitrogen (N) and phosphorous (P) were consumed and exhausted, which were considered a potential cause of the shift in the dominant organisms from large diatoms to pico- and nano-plankton in the low Chl-a environment. In particular, silicate (Si) was not a major limiting factor for phytoplankton production, since the Si:DIN and Si:P ratios clearly demonstrated that there were no any potential stoichiometric Si limitations, and almost all silicate concentrations were > 2.0 µM during this study. Our results reveal that nutrient sources supplied by river discharge are a main cue for strong bottom–up effects on algal bloom succession during the early summer season in Sagami Bay.     

Passengers' perceptions and effects of bus‐holding strategy using automatic vehicle location technology

This study reports bus passengers' behavior and perceptions related to the use of potential features of an automatic vehicle location (AVL) system in bus transit through conducting an attitudinal on‐board survey in Bangkok. A passenger waiting‐time survey conducted as part of this study revealed that passengers perceive waiting‐time at bus stops to be greater than actually experienced. The other aim of this study is to examine the potential benefits of bus‐holding using an AVL technology, in terms of waiting‐time, through minimizing bus bunching under different congestion levels. The results are obtained using PARAMICS, and reveal a significant reduction in average waiting‐time.     

Traffic conflict assessment for non-lane-based movements of motorcycles under congested conditions

Traffic conflict under congested conditions is one of the main safety issues of motorcycle traffic in developing countries. Unlike cars, motorcycles often display non-lane-based movements such as swerving or oblique following of a lead vehicle when traffic becomes congested. Very few studies have quantitatively evaluated the effects of such non-lane-based movements on traffic conflict. Therefore, in this study we aim to develop an integrated model to assess the traffic conflict of motorcycles under congested conditions. The proposed model includes a concept of safety space to describe the non-lane-based movements unique to motorcycles, new features developed for traffic conflict assessment such as parameters of acceleration and deceleration, and the conditions for choosing a lead vehicle. Calibration data were extracted from video clips taken at two road segments in Ho Chi Minh City. A simulation based on the model was developed to verify the dynamic non-lane-based movements of motorcycles. Subsequently, the assessment of traffic conflict was validated by calculating the probability of sudden braking at each time interval according to the change in the density of motorcycle flow. Our findings underscore the fact that higher flow density may lead to conflicts associated with a greater probability of sudden breaking. Three types of motorcycle traffic conflicts were confirmed, and the proportions of each type were calculated and discussed.     

A simulation model of train travel on a rail transit line

A simplified simulation model for the operational analysis of a rail rapid transit train is presented. The model simulates the movement of a train along a route, and develops the relationships of time—distance, time—speed and distance—speed. The inputs to the model are the profile of speed limits and the dynamic characteristics of the train. Without the information on the track geometry and tractive effort, the model determines the speed of the train at a location based on the previous and future speed limits relative to the location. It was found that the model can fairly accurately simulate the relationship between travel time and distance. A comparison of the train travel times between the actual and simulated runs is presented. Because of the simplicity of input and calculation method, the model can be a useful tool for the “desk-top” analysis of frequently occurring planning problems of a commuter rail or rail rapid transit line, such as the impacts of changes in speed limits, station locations, station stopping policy, addition/elimination of stations, and types of rail cars.     

Low-cost carriers in Asia: Deregulation, regional liberalization and secondary airports

While the demand for low-cost air transportation is potentially huge in Asia, development of low-cost carriers (LCCs) lags behind the region's overall aviation development, and certainly lags behind the LCC development in North America and Europe. It has been noted that market conditions and the regulatory environment of Asia are different from those of North America and Europe. What are the main differences here; and how do these differences impact market entry and success of Asian LCCs? This paper describes salient features of Asian LCCs and their developments. It examines the impact of Asia's domestic and international airline regulations and airport infrastructure on the performance of its LCCs. We find that the “Southwest effect” may also exist in Asia and that the development of low-cost terminals may compensate, at least partly, the scarcity of secondary airports in the region. The experiences of Thailand and China are investigated as case studies.     

Monorail development and application in Japan

The monorail has emerged recently as a serious mode for transit use in Japan. Three monorail lines are operational, and three more are being constructed. Approximately thirty other cities in Japan are considering the introduction of the monorail. This paper reviews the recent development of the monorail in Japan, examines its components, compares its performance with other transit modes, and assesses its potential in the context of the family of urban transit modes. This examination and comparison will be based on the features of the monorail designs recently adopted in Japan.     

A method to estimate trip O‐D patterns using a neural network approach

This paper proposes a method which identifies the trip origin‐destination (O‐D) matrix when many pairs of values for the right hand side column (B) and the bottom row (A) of the matrix are given. The method considers B and A as the cause (input) and effect (output) of a system, respectively, and that the O‐D matrix represents the relationship between the cause and the effect. The relationship which satisfies all pairs of the cause and the effect data exactly may not be identified, but, should a general pattern of the relationship exist, it should emerge when many data sets of B and A are given. Two steps are involved in the method: the first step examines if a consistent O‐D pattern exists; if a pattern is found to exist, the second step identifies the values of the elements of the O‐D matrix. The first step is based on the shape of the possibility distributions of the values of the matrix elements. The second step uses a simple back‐propagation neural network. The method is useful to problems that require identification of the cause‐effect relationship when many sets of data for the cause and effect are available, for example, the station‐to‐station travel pattern on a rapid transit line when the total entering and exiting passengers are known at each station for many different days. The model can also be applied to other transportation problems which involve input and output relation.     

Cost analysis of bulk cargo containerization

ABSTRACT

Bulk cargo containerization (BCC) involves changes in the transportation mode of container shipping for cargo that uses bulk carriers without packing. This topic has recently attracted considerable attention as an alternative transportation method for container cargo. BCC is advantageous because it can address imbalances in the amount of cargo conveyed between the main and back hauls, thereby improving efficiency. A previous survey among companies involved in cargo shipping revealed that in addition to ocean freight, vanning and devanning, and customs clearance costs, consignees’ decisions were the key factor in selecting transport modes. The present study aims to clarify the cost competitiveness of container shipping and identify cost reductions that may increase the use of BCC. To quantitatively check the results of the survey employed in this study, we constructed a model based on consignees’ and container shipping companies’ costs to determine the choice of transport mode for back-haul trade, then examined the incentives for consignees and shipping companies. We found that BCC can be realized by cost reduction on the part of the consignee and profit improvement on the part of the container shipping company for some routes and goods. Although reducing the freight rate would effectively promote BCC, reducing other costs would not have the same effect.