A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

灌注桩深基坑的有限元计算及影响因素分析

对苏州市轨道交通2号线金民东路站深基坑使用灌注桩作为支挡结构的开挖、支护施工进行了有限元数值模拟,据此分析了灌注桩内力、水平侧移等随施工过程的变化以及主体结构的内力情况,并研究了灌注桩刚度、地基土刚度对支护结构侧移和弯矩的影响,对实际施工起到一定的指导作用。     

舰船复合材料结构物应用工程技术特点及内涵分析

针对舰船平台技术所面临的发展需求与挑战,从总体平台特性、综合隐身以及综合保障技术发展需求的角度,简要分析开展舰船复合材料结构物应用工程的必要性和紧迫性。以西方国家潜艇应用为例,梳理国外舰船复合材料结构物应用发展思路,提出并阐明舰船功能复合材料结构物应用工程的3个“一体化”技术特点,着重探讨总体/结构设计技术的定义、内涵及关键技术组成。最后,针对我国未来在该领域的发展需求,提出应在尽快制定顶层规划的同时,着力加强设计基础研究和规范体系性建设。     

高坝枢纽新建通航建筑物轴线及通航条件研究

针对山区已建高坝枢纽新建通航建筑物轴线布置受河道窄、水头高、电站泄流及已有建筑物影响等条件限制的问题,依托贵州清水江白市水电站枢纽新建通航建筑物工程,采用1∶100正态整体水工模型与自航遥控船模相结合的技术手段,对多条轴线布置方案进行通航水流条件及船舶航行操控研究与优化。试验结果表明,右岸轴线布置方案通航水流条件及船舶航行状态均较好,为推荐方案。研究成果解决了工程关键问题,可供类似已建高坝水利枢纽新建或扩建通航建筑物工程参考借鉴。     

铁路车站股道运用排序模型与算法

遵守车站股道运用条件,在引入时间窗、权重和有限度3个参数的基础上,利用排序理论构建车站股道运用排序模型。结合列车在车站的实际作业过程和进路编排,利用启发式算法对模型求解,得到股道运用初始方案。基于排序原则选择、进路编排方式和多方案选优3种解改进策略对股道运用初始方案进行改进,得到股道运用改进方案。利用现代柔性理论,设置1个人—机交互接口,以股道运用可行性为第1优化目标、均衡性为第2优化目标,建立股道运用的柔性模型,按照人—机交互会话的方式进行求解。采用该模型与算法编制的铁路车站股道运用自动编排系统,目前已在广州东站和韶关站初步运用。     

形状记忆合金对纤维增强聚合物梁驱动效应的分析

着重研究了形状记忆合金偏心埋置于树脂复合材料梁/板后,合金在逆相变过程中对梁弯曲变形的驱动效应。试验结果表明:合金在逆相变过程中能对树脂基复合材料梁产生很大的驱动力,可以按需要主动控制复合材料梁、柱的变形;合金的预应变值因素对于合金的驱动效应有较大影响,合金可以进行多次激励。     

海湾大桥北引道沥青混凝土罩面设计

结合广东省汕汾高速公路汕头海湾大桥北引道路面加铺工程,分析软基路段过渡性路面的病害,提出沥青混凝土路面罩面结构设计和施工中须注意的问题.     

基于柔性管线的Flex-Lay铺管船的发展

Flex-Lay铺管船是柔性管线铺设平台，通过分析全球Flex-Lay铺管船发展现状，Flex-Lay铺管船正向专业化和多功能化方向发展，为我国Flex-Lay铺管船发展提供借鉴。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

“s”型覆岩空间结构的冲击地压危险区预测

基于微地震监测和覆岩空间结构理论，以山东华丰矿1410工作面为例，分析了“s”型覆岩空间结构的形成，利用理论方法和微地震监测预测并圈定了华丰矿1410工作面发生冲击地压的危险区域，研究了“s”型覆岩空间结构的冲击地压危险区分布规律，为现场预测和控制冲击地压灾害提供了理论基础。