负荷对柴油机微粒排放特性及其组分的影响

分析了柴油机排气微粒 (PM)的组分及其生成机理 ,并通过试验研究了负荷对PM的排放特性及其组分的影响 ,指出了负荷与PM流量之间的指数函数关系以及PM中可溶性组分 (SOF)和不可溶性组分 (IOF)的含量随负荷的变化趋势     

Quasisteady theory for the hydrodynamic forces on a circular cylinder undergoing vortex-induced vibration

Vortex-induced vibrations of a rigid circular cylinder were studied by constructing a theory based on a wake oscillator model under quasisteady approximations, thereby evaluating vortex-induced hydrodynamic forces acting on the cylinder. A lock-in limit line representing the boundary for the occurrence of frequency lock-in was also theoretically derived. Hydrodynamic forces in forced oscillation problems estimated by the theory were compared with measured ones. Although some discrepancies were found, particularly in cases with high-frequency oscillations, good agreement was achieved in most cases. Accordingly, we conclude that the present theory captures well real phenomena in the wake downstream of a cylinder subjected to a flow.     

Reduction of skin friction by microbubbles and its relation with near-wall bubble concentration in a channel

Determination of the flow structure near the wall is essential for a clear insight into the phenomenon of skin friction reduction by microbubbles in a turbulent boundary layer. An important parameter, is the bubble concentration or void fraction in the wall region in drag-reducing conditions. The purpose of this paper is to show drag-reducing effects due to microbubbles in a water channel and, more importantly, to show the dependence of the drag-reduction values on the near-wall void fraction. A two-dimensional channel with an aspect ratio of 10 was specially built for this purpose with provisions for air injection through porous plates. Skin friction was directly measured by a miniature floating element transducer with a 5-mm circular sensing disk mounted flush on the top wall 67 channel-heights downstream of the injector. The wall friction in the presence of air bubbles was found to be reduced under the same bulk velocity when compared with the value without air. Detailed void fraction profiles across the channel were obtained by a sampling probe and a fiber-optic probe. Better collapse of the drag reduction data, independent of different profile shapes, was found when plotted against the near-wall void fraction than against a cross-sectional mean void fraction. While this dependence reconfirms that the phenomena are essentially inner-region dependent, the lack of influence of the bubble distribution patterns away from the wall implies lack of outer region influence.     

Three-dimensional vortex-induced vibrations of a circular cylinder predicted using a wake oscillator model

This paper reports a numerical study based on a wake oscillator model, to determine the three-dimensional vortex-induced vibration (VIV) responses on a flexible cylinder with pinned-pinned boundary conditions subjected to a uniform flow. Four different aspect ratios have been selected for the study. The coupling equations of the structural oscillator models and wake oscillator models in both the cross-flow (CF) and in-line (IL) directions have been solved using a standard central difference method of the second order. The structural displacement, structural frequency, response wave pattern, response trajectory, and lift force coefficient, for four aspect ratios, have been compared. The numerical results establish that, for a small aspect ratio, the CF displacements have absolute standing wave behaviors without travelling wave behaviors, and the IL displacements have dominant standing wave behaviors with slight travelling wave behaviors. Further, the VIV trajectory is repeatable and displays figure-eight shapes. However, for a large aspect ratio, the CF displacements display identical characteristics with the IL displacements for a small aspect ratio, and the IL displacements for a large aspect ratio are simultaneously dominated by standing and travelling wave behaviors. Moreover, the VIV trajectory is apparently aperiodic and shows chaotic shapes.     

不同沥青体分比环氧树脂沥青混合料的断裂性能研究

固化的环氧树脂沥青由树脂相与沥青相构成。该文介绍了其沥青混合料的断裂性能的试验研究。随着沥青用量的增加,则环氧树脂沥青基体逐渐从树脂相过渡到沥青相,相应其性能会发生很大变化。采用旋转压实成型半圆形试件,通过对0.250、0.400、0.500和0.571四种不同沥青体分比的环氧树脂沥青及AH-70普通沥青、SBS改性沥青混合料,进行-25℃、-15℃、-5℃和5℃四个温度下的三点弯曲对比试验研究,并通过扫描电镜(SEM)进行微观结构形态分析。研究表明,沥青体分比低于0.400时,环氧树脂沥青混合料的最大荷载、断裂能、断裂韧度与锯缝深度、与温度的关系的变化趋势均表现出与AH-70普通沥青及SBS改性沥青混合料较大差异,沥青体分比高于0.400,则环氧树脂沥青混合料的断裂性能变化趋势与AH-70普通沥青及SBS改性沥青混合料相似。SEM微观结构研究表明,沥青体分比为0.400时,环氧树脂沥青是以树脂相为基体,沥青为近似球形分散体,沥青体分比为0.500时,沥青相为基体,树脂为近似球形(胶团)分散体。沥青体分比为0.400到0.500为环氧树脂沥青的相逆转区间。     

肥大型船整流附体的性能研究

肥大型船从船舯到船艉,船体的横剖面形状及其面积变化剧烈,从而导致在桨盘面处产生"钩"状或"兔耳"状的舭涡,通过加装整流附体的方式来改善桨盘面处的伴流分布,对于螺旋桨的减震降噪、螺旋桨推进效率的提高是一种有效的措施。基于CFD技术,在准确预报了某肥大型船伴流场的基础上,参考流经桨盘面的三维流线绕船体分布的特点,分别设计了螺旋桨前置导管、补偿导管和整流鳍,预报并分析了各附体对船体尾流场的影响,分析了整流附体的工作机理,比较了工作于各附体伴流场中螺旋桨的效率。计算结果显示,加装整流附体后,桨盘面处的舭涡消失了,并且三种附体对螺旋桨的效率都有显著的提升。     

平台运动下悬链线立管涡激振动响应特性分析

悬链线立管会在半潜平台运动带动下出现涡激振动现象,对立管疲劳寿命造成影响.借助海工结构物动力分析软件Orcaflex建立立管模型,使用Iwan-Blevins尾流振子模型进行数值模拟.通过与试验结果对比验证了该方法的可行性.同时建立实尺度悬链线立管模型,并考虑背景海流的影响,分析平台垂荡、纵荡运动下的立管涡激振动响应和疲劳损伤.研究表明,平台运动产生的非定常流场将引起悬链线立管发生涡激振动现象,并在背景洋流激励的基础上增大疲劳损伤,在立管结构实际工程设计时应予以关注.     

Durability of concrete made with manganese slag as supplementary cementitious materials

This paper discusses mineral composition and pore microstructure characteristics of water-cooled manganese slag and its effects on durability of concrete. The Mn slag has an alveolate pore structure, and the ground Mn slag is characterized by multiangular shape which consists of α′-C₂S, C₃MS₂, CaO·MnO·2SiO₂ and C₂AS. Experimental results show that the Mn slag has potential hydraulic reactivity. Concrete made with Mn slag as supplementary cementitious materials (SCMs) exhibits very low strength loss and weight loss in the synthetic seawater corrosion and freezing-thawing cycle tests. The research provides useful reference for knowing about Mn slag and for applying Mn slag to improve the durability of concrete.     

不同路线国Ⅴ车用重型柴油机微粒物中SOF和PAHs的对比研究

采用AVL全流采样(CVS)系统,对2台国Ⅴ车用重型柴油机进行了ESC和ETC循环试验,并利用气相色谱—质谱联用仪等设备对颗粒物中的可溶性有机物(SOF)和多环芳烃(PAHs)进行了分析。通过对比采用DOC+DPF和SCR两种技术路线柴油机的SOF和PAHs及其组分,对它们的排放特性进行了研究。研究发现,无论是ESC循环下还是ETC循环下,DOC+DPF路线发动机PM排放中SOF含量以及PAHs排放总浓度都要明显低于SCR路线发动机,PM中菲和芘的浓度会降低一半以上。     

多桨船舶自航因子数值预报

以某四桨水面船舶为研究对象,基于RANS方法和滑移网格技术,建立船、附体和螺旋桨整体计算模型,并运用小范围改变螺旋桨转速的方法和前后桨分别计算的方法预报该船的自航因子。结果表明：四桨船舶内、外桨的自航因子并不相等,内后桨的实效伴流分数和推力减额分数均比外前桨的大;提出的方法计算结果可靠,能够体现四桨船舶自航因子的差异性,并且符合推力减额与伴流关系的一般规律,可为多桨船舶的自航试验提供依据。