半约束模型试验--一种验证随浪和斜浪中波浪力计算的手段

本文采用半约束模型试验技术，对一条高速船在规则波中随浪和斜浪工况进行了流体动力系列试验，以探讨航运的安全性，验证作用于船体上波浪力的估算方法。对每次试验，以波动方程的形式采用数值估算方法确定环绕船模的波浪运动的时间历程。并用同样的方法从测量数据中提取垂荡和纵摇与模型测量运动，一阶波导纵荡、横荡作用力和首摇力矩。因此合理比较理论计算的波浪力与力矩的时间历程成为可能。这表明SSPA海事动力学的研究所(MDL)模型试验设施可以提供高质量的测量，与所述计算方法结合起来可用来验证理论计算和建立半经验方法。     

磁悬浮列车穿越隧道引起的压力波传播规律研究

在对Fluent软件进行二次开发的基础上，对磁悬浮列车穿越隧道引起的压力波进行了三维数值模拟，得出了隧道内的压力波时程曲线。并将隧道内的压力波动情况与列车的运行情况相结合，对压力波在隧道内的传播规律进行了详细的分析和解释，这对磁悬浮铁路隧道的设计提供了理论基础。     

Development of Green-Naghdi models with a wave-absorbing beach for nonlinear, irregular wave propagation

Two-dimensional and three-dimensional Green-Naghdi (GN) models equipped with a numerical wave-absorbing beach have been developed to simulate nonlinear, regular, and irregular wave propagation. The numerical beach is introduced near the downstream boundary to absorb outgoing waves. An appropriate amount of numerical damping and an appropriate length of numerical beach are investigated using numerical experiments. The results show that the GN models with a numerical beach work very well in simulating wave propagation in water in a small computational domain.     

A high order linear model for the prediction of internal lee waves at the main sill of the Strait of Gibraltar

A linear theory for the physical fields in the water column under the action of large amplitude internal lee waves at the main sill of the Strait of Gibraltar is developed. The procedure is a combination of the perturbation and normal modes methods in order to study steady resonant conditions. The lowest order linear approach of the methodology resumes the Taylor–Goldstein equation, which can reconstruct the main features of the observed fields but the high order approach gives the finest structure and sometimes the largest contributions. The role of the non-linear terms is investigated up to the second order taking into account the non-linear interactions between modes, leading to an effective reconstruction of the whole water column for the velocity field.     

CCS船体结构板格屈曲强度直接计算评估方法

介绍了中国船级社(CCS)有关指南文件中船体结构屈曲强度校核的直接计算方法,并与国外船级社的计算法作了比较。另外,还介绍了开发的相应应用软件系统。     

船舶操纵仿真中图谱数值化方法的研究

在船舶操纵仿真中涉及大量的图谱转换工作,传统的图谱处理方法在精度和工作量上存在着一对矛盾。本文试图通过应用正弦小波拟合方法来替代传统折线方法,并在某些图谱上得到验证,可望在类似图谱数值化上得到推广和应用,以提高计算精度和减少计算工作量。     

朔准黄河桥极限承载力分析

研究目的:大跨度钢管混凝土拱桥以其特有的自重轻、强度大、抗变形能力强、施工方便和外形美观等优点,被大量地的用于桥梁结构中。本文以一座在建360 m钢管混凝土拱桥为例,采用通用程序ANSYS建立该桥的空间有限元计算模型,分别对该桥进行裸拱状态和考虑拱上建筑共同作用状态下的特征值屈曲稳定性分析、考虑几何和材料双重非线性的极限承载力分析,并对计算结果进行比较分析,给出拱桥极限桥承载力计算的一般性方法。研究结论:(1)考虑拱上结构的特征值屈曲分析结果最小值为13.477,裸拱的特征值屈曲分析结果最小值为6.673,均大于规范要求的4～5,拱肋截面满足面内和面外的稳定性要求;(2)拱桥极限承载力计算结果最小值为2.252,表明在双重非线性及结构初始缺陷的影响下,主力工况下,全桥结构的安全系数为2.252,满足考虑结构的非线性影响弹塑性稳定安全系数不得小于2的要求,结构设计合理;(3)拱上墩柱等拱上结构对全桥的计算刚度有较大的贡献,但对全桥的极限承载力影响较小;(4)特征值屈曲分析结果是非保守的计算结果,在实际结构设计过程中,必须考虑双重非线性及初始缺陷等对结构极限承载力的影响。     

A simple formulation for predicting the ultimate strength of ships

The aim of this study is to derive a simple analytical formula for predicting the ultimate collapse strength of a single- and double-hull ship under a vertical bending moment, and also to characterize the accuracy and applicability for earlier approximate formulations. It is known that a ship hull will reach the overall collapse state if both collapse of the compression flange and yielding of the tension flange occur. Side shells in the vicinity of the compression and the tension flanges will often fail also, but the material around the final neutral axis will remain in the elastic state. Based on this observation, a credible distribution of longitudinal stresses around the hull section at the overall collapse state is assumed, and an explicit analytical equation for calculating the hull ultimate strength is obtained. A comparison between the derived formula and existing expressions is made for largescale box girder models, a one-third-scale frigate hull model, and full-scale ship hulls.List of symbols A _B total sectional area of outer bottom - A _B total sectional area of inner bottom - A _D total sectional area of deck - A _S half-sectional area of all sides (including longitudinal bulkheads and inner sides) - a _s sectional area of a longitudinal stiffener with effective plating - b breadth of plate between longitudinal stiffeners - D hull depth - D _B height of double bottom - E Young's modulus - g neutral axis position above the base line in the sagging condition or below the deck in the hogging condition - H depth of hull section in linear elastic state - I _s moment of inertia of a longitudinal stiffener with effective plating - l length of a longitudinal stiffener between transverse beams - M _E elastic bending moment - M _p fully plastic bending moment of hull section - M _u ultimate bending moment capacity of hull section - M _uh ,M _us ultimate bending moment in hogging or sagging conditions - r radius of gyration of a longitudinal stiffener with effective plating [=(I _s /a _s )^1/2] - t plate thickness - Z elastic section modulus at the compression flange - Z _B ,Z _D elastic section modulus at bottom or deck - slenderness ratio of plate between stiffeners [= (b/t)(_y/E)^1/2] - slenderness ratio of a longitudinal stiffener with effective plating [=(l/r)(_y/E)^1/2] - _y yield strength of the material - _yB , _yB , _yD yield strength of outer bottom, inner bottom - _yS deck, or side - _u ultimate buckling strength of the compression flange - _uB , _uB , _uD ultimate buckling strength of outer bottom - _uS inner bottom, deck, or side     

迎浪规则波中小水线面双体船纵向运动及波浪载荷非线性特性数值分析

基于RANS方程和VOF模型求解船体粘性兴波流场,开展了小水线面双体船(Small Waterplane Area Twin Hulls,SWATH)迎浪规则波中纵向运动及波浪载荷的非线性特性研究.通过数值计算结果与模型试验结果的对比分析,验证了文中方法的有效性;在此基础上,较为系统地分析了SWATH船的垂荡及纵摇运动响应、垂向加速度和波浪载荷的一阶及二阶量随入射波高的变化规律,指出SWATH船的运动响应及载荷与波高存在非线性的关系,尤其体现在响应共振区附近;相比于船体垂荡和纵摇运动,垂向加速度及波浪载荷的非线性特性更为显著.     

基于固有变形的船用钢薄板对接焊失稳变形的数值分析

在船用钢薄板的焊接过程中,不但会产生常见的焊接变形,也有可能产生焊接失稳变形。本文以焊缝的固有变形为依据,阐明船用钢薄板对接焊失稳变形产生的内在机理；同时,以固有变形为输入参数,通过弹性有限元分析的数值模拟,预测出可能产生的失稳变形模态和变形值；最终,通过四种不同的工艺方法(激光焊、瞬态热拉伸、随焊激冷和间断焊等),来减小固有变形的数值,并控制薄板对接焊接头可能产生的失稳变形。