模糊数据库技术在航海避碰决策支持系统中的应用

将航海避碰案例规范化 ,并根据案例中部分信息的不精确性 ,在数据库系统的数据表示和查询中引入模糊技术 ,从而形成了一个模糊关系型的避碰案例数据库系统 ,并将其嵌入到航海避碰决策支持系统当中 ,为安全航行提供了更丰富的决策信息。     

高等级沥青路面基层底裂缝三维数值分析

裂缝尖端应力强度因子是判断裂缝开裂扩展的重要指标,本文应用有限元软件ABAQUS,建立了20结点等参立方体单元的有限元模型,采用奇异等参元法及断裂力学理论,对路面基层裂缝问题进行了数值分析,分析探讨了路面结构参数对基层裂缝应力强度因子的影响及应力强度因子K1和K2在基层裂缝扩展过程中的变化规律,并预估了裂缝的扩展寿命。计算结果真实反映路面结构的现象和规律,可为高等级公路抗裂设计提供依据。     

A multi-spring model for monopile analysis in soft clays

The offshore wind industry in China has seen a rapid development in recent years and is projected to account for half of global yearly installed capacity in the years to come. Monopiles are a popular foundation solution for supporting offshore wind turbines. However, due to challenging seabed soil conditions, which often feature thick normally consolidated soft clays and harsh environmental loading (i.e. frequent occurrence of typhoons), extremely long monopiles are often designed. The large monopiles are costly to fabricate and install and sometimes kills the viability of the concept in cases where the bedrock is relatively shallow and expensive piling in rock is otherwise required. However, the state-of-practice for designing these monopiles in clays is typically by using the API p-y springs, which are widely known to underestimate soil-pile interaction stiffness and capacity for large diameter monopiles. Improvement to the design method can therefore have significant economic implications to the industry. The paper presents an effort toward this direction. A multi-spring beam-column model suitable for monopile design in soil conditions in China is proposed. The model features three soil spring components, namely the lateral p-y spring, the pile tip base shear s-y spring and rotational m-θ springs along the pile shaft. The validity of the model is verified by a comprehensive suite finite element parametric analyses. Guidance for incorporating the cyclic loading effect into design is also provided. The model proposed in this paper has large potentials for application in design practice.     

水泥粉煤灰碎石基层材料路用性能的研究

对水泥粉煤灰碎石基层材料的各项路用性能进行了试验研究.研究表明,水泥粉煤灰稳定碎石兼具水泥和二灰稳定材料的优点,将其作为路面基层材料是可行的.     

带分布式动力吸振器基座振动传递特性研究

在弹性梁上等间距安装吸振器,构建带分布式动力器的基座系统,建立了Euler梁-吸振器-弹性支承耦合系统的力学模型。给出了子结构的导纳矩阵,推导了基座的动态特性传递方程,得到了基座系统的力传递率表达式,并详细讨论了系统参数对基座减振性能的影响。搭建了带分布式吸振器基座系统实验平台,对电阻应变式力传感器进行了标定,测试了基座的力传递率特性。数值仿真与实验测试结果均表明,带分布式动力吸振器基座在低频取得了优越的减振效果。     

水泥稳定碎石在二级公路基层施工中的质量控制

文章通过分析水泥稳定碎石的作用原理及形成过程,阐明了在二级公路建设中水泥稳定碎石的施工要点及控制方法。     

单层铺筑大厚度水泥碎石结构施工控制方法

文章以广西岑溪至梧州高速公路工程为例,介绍采用大吨位压路机,一次性摊铺碾压成型大厚度水泥碎石基层的施工流程,并通过对试验路段的钻芯取样实验,验证采用该施工方法的可行性.     

水泥搅拌桩加固高速公路深层软弱土基的施工工艺与质量控制

依据沿海高速沧州段土建四合同段软土路基水泥搅拌桩加固处理的应用,介绍水泥搅拌桩的加固机理、施工工艺、施工质量检验、质量控制措施等内容。     

浅谈水泥稳定碎石基层施工质量的控制

结合河南省南阳至邓州高速公路水泥稳定碎石基层的施工经验,分析其施工工艺与质量控制过程,提出施工过程的控制要点和关键步骤,以及施工中存在问题的注意事项。     

桥上CRTSⅡ型板式无砟轨道底座张拉纵连模拟分析

根据桥上CRTSⅡ型板式无砟轨道结构特点,建立桥上CRTSⅡ型板式无砟轨道底座施工全过程的有限元计算模型,分6个施工步骤分析底座从浇筑、张拉再到锁定整个过程中的受力及变形,研究表明:张拉前需确定底座锁定板温,以控制底座温度变化幅度;张拉时整个断面需均匀张拉,避免出现因应力集中而导致混凝土拉裂,当底座温差较大时,必须每隔24 h重复张拉1次,直到达到最终的张拉量;张拉完成后,BL2后浇带必须待混凝土浇筑段内应力均衡后方能浇筑。