兰新高速铁路高寒地段路基温度场数值模拟分析

兰新高铁浩门至大梁区间所处地区海拔高,气温低,冻结期长,属于深季节性冻土区。为解决该区间路基冻害问题,依据当地气候条件,运用ANSYS有限元分析软件,对低路堤、零断面换填路基及不同深度处铺设保温材料的路基温度场进行数值模拟,分析路基冻结深度的变化规律和最大冻结深度,为高寒区高速铁路路基冻害防治措施设计提供参考。研究表明:(1)由于兰新高铁浩门至大梁区间海拔高、冬季冻结时间长、气温低等原因,导致路基冻结深度大;(2)零断面换填路基实测地温和数值模拟计算结果基本相符,所选计算模型、参数等可以为其他相同条件断面数值模拟分析采用;(3)铺设保温板路基温度场较未铺设保温板的0℃线上移,冻结深度增加速率变小,最大冻结深度明显减小,路基保温效果较好;(4)由于路基边坡、基床以下部位土层性质、厚度、热物理参数等影响,低路堤最大冻结深度比零断面换填路基大。     

桥梁试件低温试验装置的研制

根据桥梁试件低温试验所需的低温环境,研制出可获得-50℃的低温,而且能进行动载与静载试验的桥梁试件低温试验装置。试验装置采用R22的双级压缩制冷系统,低温箱的结构可承受试验时的大荷载。解决研制过程中冷桥漏冷量的减少、制冷剂流量的调节、制冷系统的安全保护等关键技术。试验装置对40个钢—混凝土混合梁试件进行了-50,-30,-15,0℃下的动载与静载试验,运行3个多月,结果表明试验装置可靠性高、制冷效果好,满足桥梁试件低温试验的要求。     

低剂量水稳基层防治薄面层沥青路面反射裂缝研究

采用低剂量水泥稳定碎石基层作为防治薄面层沥青路面反射裂缝的主要方案,利用室内试验和试验路工程分别得到不同剂量水泥稳定碎石基层的收缩特性以及强度发展规律。力学分析和观测结果都证明该方法可以有效防治薄面层沥青路面反射裂缝。     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.     

Policy packages for modal shift and CO2 reduction in Lille,France

This paper proposes different policy scenarios to cut CO₂ emissions caused by the urban mobility of passengers. More precisely, we compare the effects of the ‘direct tool’ of carbon tax, to a combination of ‘indirect tools’ – not originally aimed at reducing CO₂ (i.e. congestion charging, parking charges and a reduction in public transport travel time) in terms of CO₂ impacts through a change in the modal split. In our model, modal choices depend on individual characteristics, trip features (including the effects of policy tools), and land use at origin and destination zones. Personal “CO₂ emissions budgets” resulting from the trips observed in the metropolitan area of Lille (France) in 2006 are calculated and compared to the situation related to the different policy scenarios. We find that an increase of 50% in parking charges combined with a cordon toll of €1.20 and a 10% travel time decrease in public transport services (made after recycling toll-revenues) is the winning scenario. The combined effects of all the policy scenarios are superior to their separate effects.     

高速公路低路基设计探讨

从高速公路采用低路基设计的必要性、可行性及采取相应措施几方面进行探讨,从而达到节约土地资源这一关系整个国民经济发展和社会稳定的重大战略问题。     

矮墩宽箱连续刚构桥设计

文章结合广西八尺江大桥建设的工程实例,介绍如何利用二三维有限元电算程序对矮墩宽箱连续刚构桥进行施工和成桥阶段的计算分析,从而达到满足宽箱(18·5m)、矮墩(12·5m)的设计要求。     

轻量化/低成本底盘胶导入

文章主要介绍了轿车工厂导入轻量化/低成本底盘胶的内容。具体从设备安装、事前材料验证、轻量化/低成本效果确认、后续改善等方面进行具体阐述。     

电动汽车动力电池低温性能研究与应用

电动汽车锂离子动力电池在低温条件下工作时,电池的内阻明显升高、功率和能量急剧下降,导致整车低温下动力性能不足、续驶里程不足、充电受限等问题。通过试验进行了动力电池的低温特性研究,提出了适合整车低温工作的解决方案,通过实车验证,达到了很好的效果。     

自行设计下导梁跨越电气化铁路运营线进行架梁施工

介绍在海城站内跨越13股铁道线路进行架梁,其中有5条高压电化网已经通电运营。在两侧引桥未形成的条件下,自行研制提梁门架和下导梁,成功架设了30mT型梁和40m T型梁的施工过程。