最佳纠错码的快速译码

论文介绍了纠８位突发错误的最佳码的构造和截短，给出了基于字节运算的快速译方法及实现步骤，此法的一般性还可推广应用到共它循环码。     

新型测力轮对标定试验台研制

在分析国内外测力轮对标定技术现状及不足的基础上,提出了新型测力轮对标定试验台的设计要求和设计目标。研制的TK-LDBD型测力轮对静态标定试验台在实现垂、横、纵三向力的独立及联合精确加载的基础上大幅提升了设备适用范围及标定效率。为高精度连续测量测力轮对的研究及运用提供了技术支撑。     

非自由液化场地地基动力性能大型振动台模型试验研究

基于1∶10模型大型振动台试验,研究非自由液化场地的地基动力性能。液化场地条件下,与自由场地基相比,非自由场地地基的自振频率明显加大、动力耗能作用提高较小。土层液化前且在小震输入下,地基动力变形的线性特征较突出,主要表现为对地震波的动力放大作用,加速度反应自下而上逐渐增大;土层完全液化后,地基加速度反应自下而上也逐渐增大,这是由于液化地基的层间剪切运动加快且加快的速率自下而上逐渐增大所致。地基孔压变化主要受两方面因素影响:一是随埋深减小,孔压减小,但孔压比增大;二是离桩距离越近,孔压和孔压比越大。土层液化前,输入波主要峰值过后,自下而上孔压消散逐渐减慢。较大震输入下,自下而上孔压有减小的趋势,但最大孔压比均很快达到液化孔压比;输入波主要峰值过后,孔压消散很缓慢,尤其是孔压消散随埋深减小越来越慢。试验中还出现瞬时负孔压的有趣现象,这也许是由于可液化土层发生瞬时膨胀作用所致。     

间歇式沥青拌和站冷料供给系统流量的标定方法

以实例介绍间歇式沥青拌和冷料供给系统流量的标定方法和步骤，以确保冷料供给器按目标配合比准确供料，使沥青混合料的生产配比更加接近目标配比，保证拌和成品料的质量。     

新型负阶跃动态扭矩校准装置

针对扭矩传感器静态校准无法完全满足实际需要的难题,设计一种新型100 N·m负阶跃动态扭矩校准装置,并阐述该装置的工作原理和关键技术。校准装置由扭矩产生装置、连接系统、制动系统、信号处理控制系统和空气轴承系统组成,利用火工拔销器产生负阶跃动态扭矩,较大程度上降低负阶跃动态扭矩的下降时间,并采用空气轴承的支承方式提高动态扭矩的传递精度。通过对试验数据进行分析和处理,结果表明该装置负阶跃扭矩产生时间低于0.1 ms。不确定度分析结果显示,该装置的扩展不确定度U为4.22%,扩展因子k为2。     

基于粒子群算法的水下多元线阵阵形有源校正方法

针对存在阵元位置误差的水下多元线阵,提出一种基于粒子群优化算法的远场有源阵形校正方法.该方法选用2个辅助源分时工作方式,利用无条件最大似然方位估计算法构建目标函数,并通过粒子群算法对阵元位置进行寻优.利用该方法对均匀线阵进行性能仿真实验.结果表明:该方法稳健性好、校正精度高,具有一定的应用前景.     

Validation of an extended discrete first-order model with variable speed limits

This paper validates the prediction model embedded in a model predictive controller (MPC) of variable speed limits (VSLs). The MPC controller was designed based on an extended discrete first-order model with a triangular fundamental diagram. In our previous work, the extended discrete first-order model was designed to reproduce the capacity drop and the propagation of jam waves, and it was validated with reasonable accuracy without the presence of VSLs. As VSLs influence traffic dynamics, the dynamics including VSLs needs to be validated, before it can be applied as a prediction model in MPC. For conceptual illustrations, we use two synthetic examples to show how the model reproduces the key mechanisms of VSLs that are applied by existing VSL control approaches. Furthermore, the model is calibrated by use of real traffic data from Dutch freeway A12, where the field test of a speed limit control algorithm (SPECIALIST) was conducted. In the calibration, the original model is extended by using a quadrangular fundamental diagram which keeps the linear feature of the model and represents traffic states at the under-critical branch more accurately. The resulting model is validated using various traffic data sets. The accuracy of the model is compared with a second-order traffic flow model. The performance of two models is comparable: both models reproduce accurate results matching with real data. Flow errors of the calibration and validation are around 10%. The extended discrete first-order model-based MPC controller has been demonstrated to resolve freeway jam waves efficiently by synthetic cases. It has a higher computation speed comparing to the second-order model-based MPC.     

A methodology for evaluating the performance of model-based traffic prediction systems

Model-based traffic prediction systems (mbTPS) are a central component of the decision support and ICM (integrated corridor management) systems currently used in several large urban traffic management centers. These models are intended to generate real-time predictions of the system’s response to candidate operational interventions. They must therefore be kept calibrated and trustworthy. The methodologies currently available for tracking the validity of a mbTPS have been adapted from approaches originally designed for off-line operational planning models. These approaches are insensitive to the complexity of the network and to the amount and quality of the data available. They also require significant human intervention and are therefore not suitable for real-time monitoring. This paper outlines a set of criteria for designing tests that are appropriate for the mbTPS task. It also proposes a test that meets the criteria. The test compares the predictions of the mbTPS in question to those of a model-less alternative. A t-test is used to determine whether the predictions of the mbTPS are superior to those of the model-less predictor. The approach is applied to two different systems using data from the I-210 freeway in Southern California.     

液压驱动转盘在海洋固定平台模块钻机上的设计与应用

海洋固定平台模块钻机空间狭小、布局紧凑、要求设备具有尺寸小、质轻、集成度高、运行安全可靠等特点,而传统电机驱动转盘的驱动方式存在传动链长、传动部件多、传动装置复杂、结构尺寸庞大等问题,在模块钻机尺寸有特殊要求的情况下安装难度大、使用和维修不便,影响总体布局和结构形式的设计。针对上述情况,通过液压驱动转盘与电驱动转盘进行对比,总结出液压驱动转盘小巧轻便、易于建造安装、能够优化钻台结构、操作维护费用低、安全可靠等特点,可为空间有特殊要求的海洋固定平台模块钻机提供一定的参考。     

基于双轴位置转台的捷联惯导系统级标定技术

本文研究一种基于双轴位置转台的激光陀螺捷联惯导系统的系统级标定方法。建立了附加约束条件的陀螺和加速度计标定模型,从捷联惯导系统的误差方程出发,建立30维Kalman滤波标定模型,以速度和位置作为观测量,并设计双轴位置旋转路径,对惯性仪表标定参数进行激励与辨识。仿真实验结果表明,该方法能够准确估计出陀螺和加速度计的15个标定误差参数,具有一定的参考价值。