Critical review of handling diagram and understeer gradient for vehicles with locked differential

The steady-state cornering behaviour of rear-wheel drive vehicles fitted with locked differential is critically analysed by means of simple, albeit carefully formulated, vehicle models, which allow for a rigorous theoretical analysis. Results obtained for some classical manoeuvres, with either constant forward speed, steer angle or turning radius, clearly show that, in the case of locked differential, the vehicle cornering behaviour is strongly affected by the manoeuvre. As an important consequence, the handling diagram is not unique and the understeer gradient is no longer dependent only upon the lateral acceleration, as in vehicles equipped with an open differential. Accordingly, this study shows that some typical tools and concepts of vehicle dynamics are indeed inadequate in the case of locked differential.     

钢管混凝土系杆拱桥拱脚滑移事故案例分析

该文针对上海市某钢管混凝土拱桥在施工中发生拱脚滑移事故,以实际工况计算为依据分析其直接和深层原因,并提出改进措施和建议。     

视频双微分补偿电路的仿真研究

交通管理监视器的视频电路，受通频带限制导致图像轮廓模糊、清晰度下降，通常需要采用双微分视频补偿．以一种具体的双微分视频补偿电路为例，分析了两次微分的补偿过程，用电路理论对元件的取值进行了研究，并采用功能强大的Electronics Workbench软件进行了仿真实验论证．     

软土地铁隧道沉降治理效果评估

基于某地铁隧道沉降治理过程中的实测数据,研究沉降治理效果评估方法。首先利用3次样条曲线插值法对隧道沉降监测点数据拟合,计算出累计沉降的曲率半径;然后以等效轴向刚度模型为基础,推导出盾构管片接头环缝张开量和纵向连接螺栓受力情况。通过理论计算对治理后隧道结构健康状态作出评估,全面分析隧道沉降治理效果,为后期运营维护提供依据。     

考虑收益管理的高铁平行车次动态差别定价

基于RP(Revealed Preference)和SP(Stated Preference)调查数据，利用潜在类别模型对高铁旅客进行细分，得到旅客对平行车次不同服务属性，如列车运行时间、发车时段和舒适度的偏好程度，并对其进行量化；引入收益管理，以多列车整体收益最大为目标，构建平行车次动态差别定价模型，并设计模拟退火算法进行求解；最后，通过京沪高铁进行实例验证.结果表明：与固定票价进行客票销售相比，所提方案能够适应高峰期和平峰期不同客流特点，提高铁路客票总收益，为高铁平行车次灵活定价提供参考.     

预成孔置换强夯法处理大型油罐软基工程应用

建设大型油罐软基处理的重点在于控制工后沉降和差异沉降,但普通强夯置换法存在置换墩体着底情况不良与地基工后沉降量大的问题,针对这个问题进行了普通置换强夯法的改进研究。采取预成孔工艺能解决墩体着底情况不良的问题,从而减少地基工后沉降量。预成孔置换强夯法是一种用于处理软弱土地基的施工工艺,具有工期短、造价低与绿色环保等优点,通过预成孔保证置换墩着底可靠性,从而成功控制了工后沉降和差异沉降,实际检测结果和充水预压试验证实了处理方案的可靠性。     

考虑空车调配协调的货物列车开行方案优化研究

为实现空车调配与货物列车开行方案协调优化，结合基本运行图架构与车流径路，构建货运时空服务拓展网络。考虑配空与装卸取送、集编发等环节的时间接续要求，节点与区段不对流空车要求，以重车流全程运送与空车配送等广义总费用最少为目标，建立整数规划弧路模型。针对既有算法设计局限性，结合重车或空车配空的时间接续要求，提出将不同的 k 短路重车流方案与空车配空方案相关联的改进可行解构造方法，设计混合差分进化求解算法。实例研究表明，考虑空车调配进行重车、空车流组织协调优化，能够减少空车走行费用，及时满足装车需求，有效保证作业车流配合中转车流集结编组及时挂线，提高方案可实施性。     

基于沉降差的填石路堤施工工艺与质量控制研究

结合南方地区填石路堤施工,通过填石路堤试验段研究,介绍了填石路堤的施工工艺和质量控制要求,并通过沉降差检测分析,说明了沉降差作为填石路堤质量控制指标的可行性,为同类工程提供参考.     

Simulation and analysis of vehicle stability based on ADAMS/CAR differential brake

To improve the braking safety of automobiles, the author studied the effect of differential brake on the stabilities. To analyze the mechanical characteristics of differential brake, automotive subsystem models were built by applying ADAMS/CAR, and automotive mechanics simulation model was built by setting the main subsystems such as body, engine and brake. The simulation model studied the distribution mode of three kinds of differential brake, and beeline braking stability and turning braking stability were simulated. It shows that differential brake can amend turning shortage of automobile brake and improve its braking stability, but the effect of automobile mass on its braking stability is great. So the distribution mode of braking force and the effect of mass change should be considered while differential brake is applied.     

非线性扩散作用下一类四阶抛物方程解研究

主要研究相变理论及薄膜润滑理论中出现的一类四阶退化抛物方程,函数及二阶拉普拉斯算子作用下在边界上为0,初始时间为已知函数.通过对时间的半离散,依据椭圆型方程解的存在性,构造逼近解,进而获得相应的抛物方程解的存在性及唯一性.方法上,依赖于对逼近解做半离散迭代估计、能量估计以及紧性讨论.