激光焊接技术在汽车制造中的应用分析

伴随着生活水平的提升,人们对包括安全及舒适程度在内的汽车质量和性能等方面的要求得越来越高。激光焊接技术在汽车制造中的应用,能够有效提升焊接的精度以及质量,对汽车质量的提升有着重要的促进作用。本文首先对激光焊接技术的原理和优缺点进行简单介绍,然后介绍了几种激光焊接技术在汽车制造中的应用,旨在进一步促进对激光焊接技术的了解,增进激光焊接技术的应用。     

全自动汽车安全性能检测系统的设计与实现

介绍了全自动汽车安全性能检测系统的设计思想和系统构成，重点介绍了该集散型控制系统的特点及在上、下位机设计中需解决的问题和实现方法.     

汽油/LPG两用燃料汽车排放控制

选择桑塔纳B2电喷轿车作为研究对象，利用车用液化石油气供给装置进行了桑塔纳发动机的改装工作，并进行了大量的匹配试验。得到了桑塔纳发动机燃用液化石油气后性能变化的定量数据和调整方法。经匹配后的发动机可以达到欧洲2号标准。     

汽车急加速噪声信号分析

汽车急加速噪声信号属于短时非平稳信号，在探讨各种时频分析方法的基础上，找到了一种适合于急加速噪声信号的处理方法——短时最大熵谱方法，这将有利于急加速噪声问题的进一步深入研究。     

汽车精密成型技术现状与发展趋势刍议

简述了汽车精密成型技术的内涵、特点及其在汽车制造中的地位，较深入地分析了目前国内外精密冲压、精密铸造、精密锻造和精密焊接技术等汽车精密成型技术的发展现状，并指出汽车精密成型未来发展的主要趋势。     

基于MATLAB的整车可靠性评价

本文根据某汽车公司近3年来所做的整车可靠性试验数据,借助可靠性理论方法与数理统计手段,利用matlab软件编程,分析了该厂所生产的QE6440型轻型客车的故障规律,阐述了该车质量上所存在的问题,并找出了影响其可靠性水平的主要因素,最后对提高该车型的质量提出了相应的技术对策。     

汽车电气系统研究与探讨

对车载电气系统用电量迅速增加的趋势进行了讨论，阐述了提高车载电气系统电压值的解决途径和方案，采用42V电压值的车载电气系统既能满足电器和电子设备用电功率增加的需要，又便于使用现代技术对电子、电器元件和人身进行有效保护。给出了42V电压值车载电气系统的结构布置方案，并对其实施时间作了预测。分析了采用42V电压值的车载电气系统面临的挑战和发展动向。     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

汽车轮胎结构非线性有限元分析

本文综述了轮胎力学的发展历史与现状，阐明了轮胎结构分析的几各主要方法、研究内容及其优缺点，并重点介绍了在子午三维非线性有限元结构分析方面的工作，包括轮胎的充气，竖直加载、稳态滚动、滚动阻力及温度场分析，给出了相应的算例。由于采用一些新的方法和技术，考虑了更真实的轮胎材料模型，结构和载荷，使得分析更为有效、精确，分析结果可作为轮胎的设计，试验与改进的依据。     

国内外汽车碰撞计算机模拟研究的现状及趋势

本文论述和剖析了国内外利用计算机进行汽车碰撞模拟和建立汽车、乘员及汽车安全约束系统数学模型的研究进展。提出了我国开展汽车碰撞计算机模拟研究的发展趋势和应解决的问题。