海浪中船舶运动的可视化技术

介绍了船舶在海浪中运动的可视化技术。给出了可视化设计过程的流程图，并讨论了建立船舶模型的可行方法和三维波浪模型的数学模型，以及如何应用OpenGL函数库来生成船舶在海浪中运动的动画。在讨论可视化技术时，使用了具有平台独立性的OpenGL图形库。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

Agent技术在军事中的应用

Agent是一种全新的分布计算技术，它在军事上的应用价值巨大。从军事应用的角度出发，论述了Agent在情报搜集、作战仿真、战场可视化、网络中心战以及对Legacy系统的改进方面的潜在用途。最后对Agent在军事上的应用还需克服的问题进行了阐述。     

基于ANSYS结果文件的结构强度可视化研究

运用FORTRAN编程对ANSYS软件的二进制结果文件快速读取,基于ORE B12/RP17方法将多轴应力转化为单轴应力,由单元/节点的方向应力计算结构的最大应力、最小应力、平均应力和应力幅,根据Haigh形式的Goodman曲线对结构进行疲劳强度评估,并将疲劳强度分析结果写入ANSYS结果文件,在ANSYS通用后处理器以图形的形式显示疲劳强度结果,实现结构疲劳强度结果的可视化。     

车载动态实时可视化交通信息服务系统

一种新型城市交通信息服务系统,它采用GPS接收机、数码像机、有线/无线智能传感器、辅以人工等方式完成路况信息采集,经控制中心处理后按1～3次/min频率生成全面、综合反映路况信息的实时、动态交通图,通过无线传输为公众提供实时、动态路况信息,并用全新概念的车载显示器Skipper显示路况信息,实现道路车辆均衡化、提高道路利用率。论述了其开发背景、系统构成及工作原理、核心产品开发与运用等。     

轿车三维分离流动特性的研究

本文介绍了使用激光片光技术及激光多普勒测速仪对某型国产轿车尾流的三维分离流的尾迹和速度分布测定的试验研究。本项研究表明，光学流态显示和数字图象技术相结合，可以有效地揭示汽车的尾流结构，诊断阻力来源，本项研究为建立汽车三维分离流动的动态仿真理论模型提供了依据。     

A hybrid deep learning based traffic flow prediction method and its understanding

Deep neural networks (DNNs) have recently demonstrated the capability to predict traffic flow with big data. While existing DNN models can provide better performance than shallow models, it is still an open issue of making full use of spatial-temporal characteristics of the traffic flow to improve their performance. In addition, our understanding of them on traffic data remains limited. This paper proposes a DNN based traffic flow prediction model (DNN-BTF) to improve the prediction accuracy. The DNN-BTF model makes full use of weekly/daily periodicity and spatial-temporal characteristics of traffic flow. Inspired by recent work in machine learning, an attention based model was introduced that automatically learns to determine the importance of past traffic flow. The convolutional neural network was also used to mine the spatial features and the recurrent neural network to mine the temporal features of traffic flow. We also showed through visualization how DNN-BTF model understands traffic flow data and presents a challenge to conventional thinking about neural networks in the transportation field that neural networks is purely a “black-box” model. Data from open-access database PeMS was used to validate the proposed DNN-BTF model on a long-term horizon prediction task. Experimental results demonstrated that our method outperforms the state-of-the-art approaches.     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

车务可视化信息系统设计与实现

车务可视化信息系统通过三维模型及虚拟漫游的展现形式,将铁路运行及运营的动态信息进行集成和柔性展示,实现旅客服务信息及运输管理相关数据的整合,通过可视化的展现方式既方便旅客及管理人员,又充分展示铁路信息化建设的成果。     

SS4B电力机车转向架可视化标准作业系统研究

SS_4B型电力机车转向架结构复杂,检修工序繁琐,对作业人员的检修技能培训要求高,针对目前培训方式存在的问题,提出建立转向架可视化标准作业系统,综合利用多媒体技术、数字化建模技术以及虚拟现实技术,构建集三维动画和人机交互功能于一体,信息集中化、培训作业标准化、培训时空自由化、周期短且考核针对性强的可视化培训系统,实现对SS_4B型电力机车转向架系统的内部结构、检修流程及其动态拆装过程的逼真模拟,提升实操培训效率和沉浸式体验,提高检修人员技能水平。