首页 | 本学科首页   官方微博 | 高级检索  
     检索      

SiCp/AlSi7Mg1复合材料的摩擦和磨损特性
引用本文:李墨林,张斌,吕新华,赵玉良.SiCp/AlSi7Mg1复合材料的摩擦和磨损特性[J].大连铁道学院学报,2000(4).
作者姓名:李墨林  张斌  吕新华  赵玉良
作者单位:大连铁道学院材料科学与工程系!辽宁大连 116028(李墨林,张斌,吕新华),沈阳铁路局苏家屯机车车辆配件厂!辽宁沈阳 110015(赵玉良)
基金项目:大连市青年科学技术基金!(93216010)
摘    要:研究了在№20机油摩擦条件下,采用环状试验块、AlSi7Mg1、10SiCp/AlSi7Mg1和 25%SiCp/AlSi7Mg1的复合材料滑动摩擦行为.试验结果表明,复合材料无论在低载荷或在高载荷时都比没增强基体具有优异的耐磨性能,两种体积率复合材料的磨损速度是其基体的 1/8.应用 SEM、 EDXA观察摩擦表面以研究其机理.

关 键 词:碳化硅  耐磨性  复合材料  颗粒

Analysis on Friction and Wear Characteristics of SiCp/AlSi7Mg1 Composite Materials
LI Mo-Lin,ZHANG Bin,LU Xin-hua,ZHAO Yu-liang.Analysis on Friction and Wear Characteristics of SiCp/AlSi7Mg1 Composite Materials[J].Journal of Dalian Railway Institute,2000(4).
Authors:LI Mo-Lin  ZHANG Bin  LU Xin-hua  ZHAO Yu-liang
Abstract:The sliding wear behavior of AlSi7Mg1, 10% Vol. SiCp/AlSi7Mg1, 25%Vol. SiCp/AlSi7Mg1, under lubrication with No. 20 oil has been in vestigated by using block-on-ring test. It shows that the composites possess an excellent wear resistance over the unreinforced matrix alloy when either low load or high load is applied. The wear rates of the composites with both volume fractions have one eighth of that of matrix alloy. The SEM and EDXA analysis on the wear surfaces have been performed to understand the underlying mecha- nism.
Keywords:SiC  wear resistance  composite  particle
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号