| 基于MFC对SIMULINK二次开发的喷水推进系统仿真 |
| |
| 引用本文： | 常书平,周自文,孙建群.基于MFC对SIMULINK二次开发的喷水推进系统仿真[J].船舶工程,2019,41(S1):81-85. |
| |
| 作者姓名： | 常书平 周自文 孙建群 |
| |
| 作者单位： | 中国人民解放军63983部队,中国人民解放军63983部队 无锡 214035,中国人民解放军63983部队 无锡 214035 |
| |
| 摘 要： | 提出了使用MFC对Matlab/SIMULINK进行二次开发的方法,该方法是通过MFC编写程序驱动SIMULINK模型转换来的C++源代码而实现的。这既可以发挥SIMULINK仿真能力强的优势,又可以充分利用MFC编程的高效性、灵活性,提高仿真软件开发的效率。以某喷水推进船仿真程序为研究对象实现了MFC对SIMULINK的二次开发,得到了适用于该喷水推进船各种工况的仿真软件,并以回转过程与加速过程为例进行了仿真计算。
|
| 关 键 词： | 二次开发 MFC SIMULINK 喷水推进系统 |
| 收稿时间： | 2019/5/12 0:00:00 |
| 修稿时间： | 2019/7/1 0:00:00 |
Waterjet Propulsion System Simulation Based on Using MFC to Develop SIMULINK |
| |
| CHANG Shuping,and.Waterjet Propulsion System Simulation Based on Using MFC to Develop SIMULINK[J].Ship Engineering,2019,41(S1):81-85. |
| |
| Authors: | CHANG Shuping and |
| |
| Institution: | No.63983 Unit of PLA,No.63983 Unit of PLA |
| |
| Abstract: | A method of using MFC to develop Matlab/SIMULINK is proposed, which uses MFC compiling procedure to drive the C++ source code generated form SIMULINK model. This method not only makes full use of the powerful simulation advantage of SIMULINK, but has the high efficient and flexible?programming capability of MFC, which can improve the software developing efficiency. Then this method is applied in the waterjet propulsion system simulation, the simualtion software is developed which could run independent and simulate most work conditions of the waterjet propulsion system. In the end, the turning process and accelerating process are simulated using this programme. |
| |
| Keywords: | Second development MFC SIMULINK Waterjet propulsion system |
|
| 点击此处可从《船舶工程》浏览原始摘要信息 |
| 点击此处可从《船舶工程》下载免费的PDF全文 |
|
