Implications of climate change for thermal discomfort on underground railways

Hot weather events, ventilation assets, changing passenger demand and service expectations have all caused increased attention on thermal comfort on London’s Tube. This study provides estimates of the future number of days when passengers travelling on sections of the Tube could be subjected to thermal discomfort under future scenarios of climate change, and the potential number of passengers dissatisfied. A risk based methodology is presented, integrating a spatial weather generator modified for urban areas and a thermal comfort model. The study provides an initial assessment of adaptation options by considering the implications of lowering train temperatures by 2 °C and 4 °C to represent saloon cooling. Median results under a 2050 high scenario indicate that all Tube lines assessed could experience near-complete passenger dissatisfaction with the thermal environment in trains in the unlikely event that nothing else were to change. Adaptation aimed at lowering train temperatures has the potential to provide tangible improvements in thermal comfort. However, this was not projected to be sufficient to maintain comfortable thermal conditions for many of the lines in the 2050s under high emission scenarios, requiring a combination of other infrastructure cooling measures to be implemented in parallel.     

地铁列车运行区间隧道热负荷分析

对地铁运行产热的因素作了详细的阐述。根据列车的运行状态，对产热量进行定量分析，拟合了单列列车在1000m区间隧道运行中，在不同时速运行条件下，单次列车通过区间得热量。对列车动态环境下的热量分配进行了线性回归，表明留在区间隧道内热量较小，大部分热量随着活塞风的传递作用进入前方站台和前方区间隧道，列车运行速度对热量分配具有...     

A multiobjective planning model for intercity train seat allocation

This paper presents a multiobjective planning model for generating optimal train seat allocation plans on an intercity rail line serving passengers with many‐to‐many origin‐destination pairs. Two planning objectives of the model are to maximise the operator's total passenger revenue and to minimise the passenger's total discomfort level. For a given set of travel demand, train capacity, and train stop‐schedules, the model is solved by fuzzy mathematical programming to generate a best‐compromise train seat allocation plan. The plan determines how many reserved and non‐reserved seats are to be allocated at each origin station for all subsequent destination stations on each train run operated within a specified operating period. An empirical study on the to‐be‐built Taiwan's high‐speed rail system is conducted to demonstrate the effectiveness of the model. The model can be used for any setting of travel demand and stop‐schedules with various train seating capacities.     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.     

Probabilistic analysis of the release of liquefied natural gas (LNG) tenders due to freight-train derailments

Liquefied natural gas (LNG) has emerged as a possible alternative fuel for freight railroads in the United States, due to the availability of cheap domestic natural gas and continued pursuit of environmental and energy sustainability. A safety concern regarding the deployment of LNG-powered trains is the risk of breaching the LNG tender car (a special type of hazardous materials car that stores fuel for adjacent locomotives) in a train accident. When a train is derailed, an LNG tender car might be derailed or damaged, causing a release and possible fire. This paper describes the first study that focuses on modeling the probability of an LNG tender car release incident due to a freight train derailment on a mainline. The model accounts for a number of factors such as FRA track class, method of operation, annual traffic density level, train length, the point of derailment, accident speed, the position(s) of the LNG tender(s) in a train, and LNG tender car design. The model can be applied to any specified route or network with LNG-fueled trains. The implementation of the model can be undertaken by the railroad industry to develop proactive risk management solutions when using LNG as an alternative railroad fuel.     

营运大客车正面碰撞乘员伤害的研究

客车发生正面碰撞事故约占客车碰撞事故的50%~60%。利用LS-DYNA软件,建立了包括假人、安全带和安全气囊在内的大客车车体有限元模型,对不同速度下营运大客车的正面碰撞特性进行了模拟仿真计算,分析了无任何保护措施、佩戴安全带及佩戴安全带且安全气囊起爆三种事故形态下乘员头部HPC值、胸部压缩量和大腿骨轴向接触力等伤害值。研究结果表明,安全带对于驾驶员的保护意义重大,为营运大客车乘员保护设计以及合理制定营运大客车正面碰撞法规提供数据参考。     

Mixed RP/SP models incorporating interaction effects

In order to analyse the impact of a new train service in Cagliari (Italy) a databank including information from a revealed preference (RP) and a stated preference (SP) survey was set up. The RP data concern choice between car, bus and train; the SP data consider the binary choice between a new train service (quicker, more frequent, with a lower fare and more stations than the current one) and the alternative currently chosen by car and bus users. Logit models allowing for correlation among RP alternatives were estimated for this mixed RP/SP data set using the artificial tree structure method. The analysis included level-of-service variables measured with an unusually high level of precision, latent or second order variables (such as comfort), inertia and interaction variables. Different specifications of the utility function were tested, including the expenditure rate model, and the effects of these specifications on modelling results are highlighted. Our results show that for a population mainly composed of fixed income workers, the expenditure rate model is superior to the traditional wage rate model, yielding lower and more significant subjective values of time. Moreover, we found that the non-linear specifications appear to be more suitable as not only better model results were obtained, but also the real distribution of the error terms was revealed (i.e. highlighting correlation among public transport options).     

Optimisation of parking guidance and information systems display configurations

Operators of parking guidance and information (PGI) systems often have difficulty in determining the best car park availability information to present to drivers in periods of high demand. This paper describes a behavioural model of parking choice incorporating drivers perceptions of waiting times at car parks based on PGI signs. This model was used to predict the influence of PGI signs on the overall performance of the traffic system.Relationships were developed for estimating the arrival rates at car parks based on trip patterns, driver characteristics, car park attributes as well as the car park availability information displayed on PGI signs. Drivers' perceptions of waiting times at car parks were assumed to be influenced by the PGI signs for observers of the signs and actual car park utilisation levels for non-observers. The model assumes that the choice of car park does not change after entering the city centre, even if conditions observed are different from those initially perceived.A mathematical programme was formulated to determine the optimal display PGI sign configuration to minimise queue lengths and vehicle kilometres of travel (VKT). The model was limited to off-street parking choices and illegal parking was not incorporated. A simple genetic algorithm was used to identify solutions that significantly reduced queue lengths and VKT compared with existing practices.These procedures were applied to an existing PGI system operating in Tama New Town near Tokyo. Significant reductions in queue lengths and VKT were predicted using the optimisation model. This would reduce traffic congestion and lead to various environmental benefits.     

Train-to-wayside wireless communication in tunnel using ultra-wide-band and time reversal

The capabilities of ultra-wide-band (UWB) technology make it a viable candidate for fourth generation wireless communication. This paper proposes the use of UWB radio technology and time-reversal (TR) technique for underground train-to-wayside communication systems. UWB technology has the potential to offer simultaneous ground-to-train communication, train location and obstacle detection in front of the trains. Time-reversal channel prefiltering facilitates signal detection and helps reducing interference. Thus, UWB–TR combination provides a challenging, economically sensible, as well as technically effective alternative solution to existing signaling technologies used in urban transport systems. This paper concentrates on the communication function and reports simulation and measurement performance evaluation of such combinations, respectively in a deterministic tunnel channel model and in real tunnel environments. A new approach is also proposed to ensure multiple access (MA) communication using modified-orthogonal waveforms.     

On particulate emissions from moving trains in a tunnel environment

Increasing attention is being paid to airborne particles in railway environments because of their potential to adversely affect health. In this study, we investigate the contribution of moving trains to both the concentration and size distribution of particles in tunnel environments. Real-time measurements were taken with high time-resolution instruments at a railway station platform in a tunnel in Stockholm in January 2013. The results show that individual trains stopping and starting at the platform substantially elevate the particulate concentrations with a mobility diameter greater than 100 nm. Two size modes of the particulate number concentrations were obtained. A mode of around 170 nm occurs when a train moves, while the other mode peaks at about 30 nm when there is no train in the station. By using principal component analysis (PCA), three contributing sources were identified on the basis of the classification of the sizes of the particles, namely railway-related mechanical wear, suspension due to the movement of trains and sparking of electric-powered components. It is concluded that the particulate matter released by individual moving trains is a key contributor to fine particles (100–500 nm) on the railway platform in a tunnel.     

A practical capacity model of a single track line

The paper presents a model for determining the practical capacity of a single track line, i.e. the maximum number of trains which can be run along it in a time unit under the condition that each train enters its bottleneck segment with a definite delay.

The input data used in the model are: geometrical characteristics of the bottleneck segment of the line under study, the intensity and structure of demand expressed by a number of trains which are run over the line in a given time unit, the scenario of traffic running over the line under study and the operational tactics of individual train categories processing on the bottleneck segment.

(Two tactics can be applied in the train processing on the line under study; first, the trains of individual categories are given different priorities in the processing, and second, all the trains have the same priority).

The output results of the model are average delays of trains of each category occurring within the train processing performed on the bottleneck segment of the line under study in a given time unit.     

An improved car‐following model for railway traffic

In this paper, we propose an improved traffic model for simulating train movement in railway traffic. The proposed model is based on optimal velocity car‐following model. In order to test the proposed model, we use it to simulate the train movement with fixed‐block system. In simulations, we analyze and discuss the space–time diagram of railway traffic flow and the trajectories of train movement. Simulation results demonstrate that the proposed model can be successfully used for simulating the train movement in railway traffic. From the space–time diagram, we find some complex phenomena of train flow, which are observed in real railway traffic, such as train delays. By analyzing the trajectories of train movement, some dynamic characteristics of trains can be reproduced. Copyright © 2011 John Wiley & Sons, Ltd.     

输水盾构隧洞复合衬砌结构设计计算研究

软土有压输水盾构隧洞采用管片外衬和整筑预应力内衬作复合式衬砌的设计计算中,为能较好考虑内衬与外衬管片的相互作用,以及内衬预应力荷载在隧洞施工和运营各阶段对复合衬砌结构受力的影响,本文提出了一种新的实体叠合计算模型。由于确定管片纵缝接头抗弯刚度的复杂性,文中建议对用数值模拟管片纵缝接头刚度采用了一种非线性耦合弹簧＂接触对＂的模拟系统。在采用实体单元建模的条件下,由于计入管片接头刚度的力学处理困难,文中研究了一种能以模拟管片接头刚度的简化计算方法。根据内、外衬砌接触界面处理方式的不同,文中提出了5种适合不同界面条件内、外层衬砌的相互作用模型。此外,本文还研制了内衬预应力荷载的一种转化程序,以解决采用等效荷载法施加预应力时的前处理问题。上述各点创意构思已在南水北调中线一期穿黄隧洞的结构设计研究中得到了具体反映和成功应用。     

A practical approach to identifying the market potential for high speed rail: A case study in the Sydney-Canberra corridor

This paper presents the methodology and selective empirical results from a study of the demand for a high speed rail system serving the Sydney-Canberra corridor currently dominated by air travel for business trips and car travel for non-business trips. We outline the steps involved in the study from problem specification, data needs, development of base year trip tables, model specification and estimation to establish switching behaviour in the presence of a new mode and calculation of induced demand for current travellers. A stated choice heteroskedastic extreme value switching model is used to evaluate the choice of fare type for business and non-business travel given the current mode used in the corridor for each sampled traveller conventional train, charter coach, scheduled coach, plane or car. Starting with the current travel profile, patronage can be predicted under alternative fare regimes, taking into account diverted traffic, induced traffic and growth. Treating fare class as endogenous enhances the real choice context facing potential patrons.     

上海地铁隧道某区段不均匀沉降的成功治理

由于施工扰动和列车的运营震陷影响，当前运营隧道线路上一些地段存在程度不同的隧道不均匀沉降，从而引起道床与管片脱开、隧道纵缝张开、隧道渗漏水等情况。运营隧道的过大不均匀沉降如不及时控制，任其发展，将严重影响地铁结构及运营安全。通过上海地铁某区段双圆隧道不均匀沉降注浆治理工程实践，探讨了软土地区地铁隧道结构不均匀沉降的控制措施，对其注浆工艺和方案的进一步总结，可以为今后其他线路区间隧道结构整治提供参考。     

When strike comes to town… anticipated and actual behavioural reactions to a one-day,pre-announced,complete rail strike in the Netherlands

We conducted secondary analysis on data collected among rail users, days before and after a national rail strike in the Netherlands. Our aim was to compare anticipated and actual behavioural reactions to the rail strike, investigate associations with traveller and trip characteristics, and perceived behavioural control and satisfaction with the chosen alternative. Forty-four percent of the people who had anticipated to travel by train on the day of the strike abandoned their trip, 24% switched to car as driver, 14% switched to another mode (as passenger), 18% stayed with the train and rescheduled the planned activity to another day. Almost half of people who had anticipated travelling by car expected to change behaviour as well. Multinomial logistic regression showed low preference for car among rail users. Considerable marginal effects were found for several variables, e.g.: young people and females were less likely to switch to car; short and middle distance trips were less likely abandoned or switched to another day; commute and business trips were more likely done by car, and business trips less likely cancelled. Despite high levels of perceived behavioural control and satisfaction with the chosen alternative, permanent modal shift as result of this strike is not expected.     

Prediction of ground vibration amplitudes due to urban railway traffic using quantitative and qualitative field data

The growth of railway transport in urban areas has lead to an increase in ground vibrations enhancing their negative environmental impact. Therefore is mandatory to predict and control ground vibrations. This work presents a methodology for the determination of prediction models of ground vibration amplitudes due to railway train circulation in urban environments. Using quantitative predictors (train speed and distance) and qualitative predictors (railway track type, dominant geology and building type), being the use of the latter predictors justified by the fact that, most frequently, quantitative parameters are very difficult to obtain in the urban environment due to their characterization. Thus, a detailed statistical study based on the proposal and validation of multiple linear regression models, is successfully applied in order to predict vibration amplitudes produced by railway train circulation, in the considered domain, as function of quantitative and qualitative predictors, easily obtained in field work. A multiple linear regression model for ground vibration prediction due to underground railway traffic has been presented for the Lisbon area.     

Robust stop-skipping patterns in urban railway operations under traffic alteration situation

In this paper an operation mode which is based on the stop-skipping approach is studied in urban railway lines under uncertainty. In this mode, each train follows a specific stop schedule. Trains are allowed to skip any intermediate stations to increase the commercial speed and to save energy consumption. As the commercial speed increases, the number of required trains in operation reduces and results eliminating unnecessary costs. To that end, a new mathematical model is proposed to reach the optimum stop schedule patterns. In the planning step, based on the traffic studies, the headway distributions are computed for different weekdays, and holidays. However, in practice, because of many unexpected events, the traffic may alter from what is planned. Therefore, in this condition, a robust plan is required that is optimized and immunized from uncertainty. In this paper, a new robust mathematical model, as well as two heuristic algorithms including (1) a decomposition-based algorithm and (2) a Simulated Annealing (SA) based algorithm is proposed. Finally, an Iranian metro line is studied and the optimum patterns are presented and analyzed.     

Solving network equilibrium problems on multimodal urban transportation networks with multiple user classes

The capacity of the high‐speed train to compete against travel demand in private vehicles is analysed. A hypothetical context analysed as the high‐speed alternative is not yet available for the route studied. In order to model travel demand, experimental designs were applied to obtain stated preference information. Discrete choice logit models were estimated in order to derive the effect of service variables on journey utility. From these empirical demand models, it was possible to predict for different travel contexts and individuals the capacity of the high‐speed train to compete with the car, so determining the impact of the new alternative on modal distribution. Furthermore, individual willingness to pay for travel time saving is derived for different contexts. The results allow us to confirm that the high‐speed train will have a significant impact on the analysed market, with an important shift of passengers to the new rail service being expected. Different transport policy scenarios are derived. The cost of travel appears to a great extent to be a conditioning variable in the modal choice. These results provide additional evidence for the understanding of private vehicle travel demand.     

Agent-based simulation framework for mixed traffic of cars,pedestrians and trams

In this paper, we report on the construction of a new framework for simulating mixed traffic consisting of cars, trams, and pedestrians that can be used to support discussions about road management, signal control, and public transit. Specifically, a layered road structure that was designed for car traffic simulations was extended to interact with an existing one-dimensional (1D) car-following model and a two-dimensional (2D) discrete choice model for pedestrians. The car model, pedestrian model, and interaction rules implemented in the proposed framework were verified through simulations involving simple road environments. The resulting simulated values were in near agreement with the empirical data. We then used the proposed framework to assess the impact of a tramway extension plan for a real city. The simulation results showed that the impact of the proposed tramway on existing car traffic would not be serious, and by extension, implied that the proposed framework could help stakeholders decide on expansion scenarios that are satisfactory to both tram users and private car owners.