共查询到18条相似文献,搜索用时 109 毫秒
1.
载货汽车防护装置最佳离地高度和刚度的分析 总被引:7,自引:0,他引:7
在大型载货汽车与轿车的碰撞事故中,轿车钻入载货汽车下部是十分可怕的死亡交通事故形态。前下部防护装置,后下部防护装置能够有效地防止钻入碰撞事故。此文分析了下部防护装置的离地高度和刚度对钻入碰撞防护效果的影响,下部防护装置在确保阻止钻入碰撞功能的前提下应尽可能多地吸收碰撞能量,以减轻轿车在碰撞中的伤害。以上述原则计算出了不同离地高度的下部防护装置的最佳刚度。 相似文献
2.
大型载货汽车后下部防护装置被动安全性及其试验程序研究 总被引:1,自引:0,他引:1
目前我国大型载货汽车后下部防护装置的被动安全性水平低下,乘用车与大型载货汽车的碰撞事故中因发生钻入碰撞而发生严重的交通事故。影响防护装置被动安全性的因素主要有后下部防护装置的离地高度及其刚度,合理的防护装置应根据不同的离地高度具有不同的最佳刚度值,保证装置能有效防止发生钻入碰撞。最后对比了标准/法规有关后下部防护装置的要求及试验程序。 相似文献
3.
4.
大型载货汽车被动安全性的特点及改进措施 总被引:1,自引:1,他引:1
大型载货汽车造成的人员死亡仅次于小型客车,工货汽车在交通事故中造成对方伤害的主要因素是:大载货汽车车架结构离地高度大,在前、后方造成轿车钻入碰撞、侧面造成展压,大型载货汽车的质量远大于轿车;与轿车时导致碰撞相容性问题,前、后下部防护装置能有效地防止轿车钻入,合理的能量吸收特性可改善载货汽车与轿车的碰撞相容性。中用交通事故统计数说明载货汽车被动安全性的重要性,深入分析载货汽车被动安全性的特点,最后介绍了改进载货汽车被动安全性的措施。 相似文献
5.
6.
7.
市场上汽车和挂车后下部防护装置多为刚性连接,当发生车辆追尾碰撞时,不能有效保护乘坐人员的安全,屡屡发生小车钻进大货车尾部伤亡事故.本文目的是提供一种汽车和挂车后下部柔性防护装置,克服已有汽车和挂车后下部防护装置缺点和不足,使汽车发生追尾碰撞时避免发生伤亡事故.此后下部防护装置不仅仅是保护追尾的小车,同时也保护了货车自身... 相似文献
8.
9.
10.
11.
为防止行驶中小车追尾大货车的情况发生,欧洲经济委员会对此做出了相关法律规定,即ECER58《后下部防护认证装置统一规定》。文章介绍了ECER58法规的内容和要求,描述了与此法规相关的加载试验内容和试验步骤,联系实际,对如何确保设计符合试验要求进行了相关说明。试验结果符合认证要求,为汽车后防护的设计安装和相关试验提供了参考。 相似文献
12.
13.
14.
15.
16.
17.
通过鼓式后制动系统数学模型分析,对该系统进行了正向设计及6种不同状态的全过程验算,最终确认后制动器在后减压缩过程中不会再出现自制动或抱死现象。运用该方案,成功对多款量产车型进行了重新设计和整改,取得了很好的市场效益,提高了摩托车行驶安全性和经济效益,并有效缩短了新产品的设计验证周期。 相似文献
18.
S. O. Kang S. O. Jun H. I. Park K. S. Song J. D. Kee K. H. Kim D. H. Lee 《International Journal of Automotive Technology》2012,13(4):583-592
This research aims to develop an actively translating rear diffuser device to reduce the aerodynamic drag experienced by passenger cars. One of the features of the device is that it is ordinarily hidden under the rear bumper but slips out backward only under high-speed driving conditions. In this study, a movable arc-shaped semi-diffuser device, round in form, is designed to maintain the streamlined automobile??s rear underbody configuration. The device is installed in the rear bumper section of a passenger car. Seven types of rear diffuser devices whose positions and protrusive lengths and widths are different (with the basic shape being identical) were installed, and Computational Fluid Dynamics (CFD) analyses were performed under moving ground and rotating wheel conditions. The main purpose of this study is to explain the aerodynamic drag reduction mechanism of a passenger car cruising at high speed via an actively translating rear diffuser device. The base pressure of the passenger car is increased by deploying the rear diffuser device, which then prevents the low-pressure air coming through the underbody from directly soaring up to the rear surface of the trunk. At the same time, the device generates a diffusing process that lowers the velocity but raises the pressure of the underbody flow, bringing about aerodynamic drag reduction. Finally, the automobile??s aerodynamic drag is reduced by an average of more than 4%, which helps to improve the constant speed fuel efficiency by approximately 2% at a range of driving speeds exceeding 70 km/h. 相似文献