Integrated optimization of bus priority operations in connected vehicle environment

Most previous works associated with transit signal priority merely focus on the optimization of signal timings, ignoring both bus speed and dwell time at bus stops. This paper presents a novel approach to optimize the holding time at bus stops, signal timings, and bus speed to provide priority to buses at isolated intersections. The objective of the proposed model is to minimize the weighted average vehicle delays of the intersection, which includes both bus delay and impact on nearby intersection traffic, ensuring that buses clear these intersections without being stopped by a red light. A set of formulations are developed to explicitly capture the interaction between bus speed, bus holding time, and transit priority signal timings. Experimental analysis is used to show that the proposed model has minimal negative impacts on general traffic and outperforms the no priority, signal priority only, and signal priority with holding control strategies (no bus speed adjustment) in terms of reducing average bus delays and stops. A sensitivity analysis further demonstrates the potential of the proposed approach to be applied to bus priority control systems in real‐time under different traffic demands, bus stop locations, and maximum speed limits. Copyright © 2016 John Wiley & Sons, Ltd.     

A new approach to evaluating on-road public transport priority projects: balancing the demand for limited road-space

Despite widespread growth in on-road public transport priority schemes, road management authorities have few tools to evaluate the impacts of these schemes on all road users. This paper describes a methodology developed in Melbourne, Australia to assist the road management authority, VicRoads, evaluate trade-offs in the use of its limited road-space for new bus and tram priority projects. The approach employs traffic micro-simulation modelling to assess road-space re-allocation impacts, travel behaviour modelling to assess changes in travel patterns and a social cost benefit framework to evaluate impacts. The evaluation considers a comprehensive range of impacts including the environmental benefits of improved public transport services. Impacts on public transport reliability improvements are also considered. Although improved bus and tram reliability is a major rationale for traffic priority its use in previous evaluations is rare. The paper critiques previous approaches, describes the proposed method and explores some of the results found in its application. A major finding is that despite a more comprehensive approach to measuring the benefits of bus and tram priority, road-space reallocation is difficult to economically justify in road networks where public transport usage is low and car usage high. Strategies involving the balanced deployment of bus and tram priority measures where the allocation of time and space to PT minimises negative traffic impacts is shown to improve the overall management of road-space. A discussion of the approach is also provided including suggestions for further methodology development.

Traffic signal timing problems with environmental and equity considerations

Traffic signal timings in a road network can not only affect total user travel time and total amount of traffic emissions in the network but also create an inequity problem in terms of the change in travel costs of users traveling between different locations. This paper proposes a multi‐objective bi‐level programming model for design of sustainable and equitable traffic signal timings for a congested signal‐controlled road network. The upper level of the proposed model is a multi‐objective programming problem with an equity constraint that maximizes the reserve capacity of the network and minimizes the total amount of traffic emissions. The lower level is a deterministic network user equilibrium problem that considers the vehicle delays at signalized intersections of the network. To solve the proposed model, an approach for normalizing incommensurable objective functions is presented, and a heuristic solution algorithm that combines a penalty function approach and a simulated annealing method is developed. Two numerical examples are presented to show the effects of reserve capacity improvement and green time proportion on network flow distribution and transportation system performance and the importance of incorporating environmental and equity objectives in the traffic signal timing problems. Copyright © 2013 John Wiley & Sons, Ltd.     

Mobility and environment improvement of signalized networks through Vehicle-to-Infrastructure (V2I) communications

Traffic signals, even though crucial for safe operations of busy intersections, are one of the leading causes of travel delays in urban settings, as well as the reason why billions of gallons of fuel are burned, and tons of toxic pollutants released to the atmosphere each year by idling engines. Recent advances in cellular networks and dedicated short-range communications make Vehicle-to-Infrastructure (V2I) communications a reality, as individual cars and traffic signals can now be equipped with communication and computing devices. In this paper, we first presented an integrated simulator with V2I, a car-following model and an emission model to simulate the behavior of vehicles at signalized intersections and calculate travel delays in queues, vehicle emissions, and fuel consumption. We then present a hierarchical green driving strategy based on feedback control to smooth stop-and-go traffic in signalized networks, where signals can disseminate traffic signal information and loop detector data to connected vehicles through V2I communications. In this strategy, the control variable is an individual advisory speed limit for each equipped vehicle, which is calculated from its location, signal settings, and traffic conditions. Finally, we quantify the mobility and environment improvements of the green driving strategy with respect to market penetration rates of equipped vehicles, traffic conditions, communication characteristics, location accuracy, and the car-following model itself, both in isolated and non-isolated intersections. In particular, we demonstrate savings of around 15% in travel delays and around 8% in fuel consumption and greenhouse gas emissions. Different from many existing ecodriving strategies in signalized road networks, where vehicles’ speed profiles are totally controlled, our strategy is hierarchical, since only the speed limit is provided, and vehicles still have to follow their leaders. Such a strategy is crucial for maintaining safety with mixed vehicles.     

Estimating performance of traffic signals based on link travel times

Recent advances in communication and computing technology have made travel time measurements more available than ever before. In urban signalized arterials, travel times are strongly influenced by traffic signals. This study presents a novel method based on well‐known principles to estimate traffic signal performance (or more precisely their major “through” movements) based on travel time measurements. The travel times were collected between signals in the field by using point‐to‐point travel time measurement technologies. Closed‐circuit television cameras and signal databases were used to collect traffic demand and signal timings, respectively. Then, the volume/capacity ratio of major downstream signal movements was computed based on demand and signal timings. This volume/capacity ratio was then correlated with travel times on the relevant intersection approach. The best volume‐delay function was found, along with many other functions, to fit the field data. This volume‐delay function was then used to estimate volume/capacity ratios and, indirectly, a few other signal performance metrics. The method, called travel time‐based signal performance measurements, was automated and displayed on a Google Map. The findings show that the proposed method is accurate and robust enough to provide necessary information about signal performance. A newly developed volume‐delay function was found to work just slightly better than the Bureau of Public Roads curve. Several issues, which may reduce the accuracy of the proposed method, are identified, and their solutions are proposed for future research. Copyright © 2016 John Wiley & Sons, Ltd.     

Coordinated transit signal priority supporting transit progression under Connected Vehicle Technology

In this paper, a person-delay-based optimization method is proposed for an intelligent TSP logic that enables bus/signal cooperation and coordination among consecutive signals under the Connected Vehicle environment. This TSP logic, called TSPCV-C, provides a method to secure the mobility benefit generated by the intelligent TSP logic along a corridor so that the bus delay saved at an upstream intersection is not wasted at downstream intersections. The problem is formulated as a Binary Mixed Integer Linear Program (BMILP) which is solved by standard branch-and-bound method. Minimizing per person delay has been adopted as the criterion for the model. The TSPCV-C is also designed to be conditional. That is, TSP is granted only when the bus is behind schedule and the grant of TSP causes no extra total person delay.The logic developed in this research is evaluated using both analytical and microscopic traffic simulation approaches. Both analytical tests and simulation evaluations compared four scenarios: without TSP (NTSP), conventional TSP (CTSP), TSP with Connected Vehicle (TSPCV), and Coordinated TSP with Connected Vehicle (TSPCV-C). The measures of effectiveness used include bus delay and total travel time of all travelers. The performance of TSPCV-C is compared against conventional TSP (CTSP) under four congestion levels and five intersection spacing cases. The results show that the TSPCV-C greatly reduces bus delay at signalized intersection for all congestion levels and spacing cases considered. Although the TSPCV is not as efficient as TSPCV-C, it still demonstrates sizable improvement over CTSP. An analysis on the intersection spacing cases reveals that, as long as the intersections are not too closely spaced, TSPCV can produce a delay reduction up to 59%. Nevertheless, the mechanism of TSPCV-C is recommended for intersections that are spaced less than 0.5 mile away. Simulation based evaluation results show that the TSPCV-C logic reduces the bus delay between 55% and 75% compared to the conventional TSP. The range of improvement corresponding to the four different v/c ratios tested, which are 0.5, 0.7, 0.9 and 1.0, respectively. No statistically significant negative effects are observed except when the v/c ratio equals 1.0.     

A virtual vehicle probe model for time-dependent travel time estimation on signalized arterials

Estimation of time-dependent arterial travel time is a challenging task because of the interrupted nature of urban traffic flows. Many research efforts have been devoted to this topic, but their successes are limited and most of them can only be used for offline purposes due to the limited availability of traffic data from signalized intersections. In this paper, we describe a real-time arterial data collection and archival system developed at the University of Minnesota, followed by an innovative algorithm for time-dependent arterial travel time estimation using the archived traffic data. The data collection system simultaneously collects high-resolution “event-based” traffic data including every vehicle actuations over loop detector and every signal phase changes from multiple intersections. Using the “event-based” data, we estimate time-dependent travel time along an arterial by tracing a virtual probe vehicle. At each time step, the virtual probe has three possible maneuvers: acceleration, deceleration and no-speed-change. The maneuver decision is determined by its own status and surrounding traffic conditions, which can be estimated based on the availability of traffic data at intersections. An interesting property of the proposed model is that travel time estimation errors can be self-corrected, because the trajectory differences between a virtual probe vehicle and a real one can be reduced when both vehicles meet a red signal phase and/or a vehicle queue. Field studies at a 11-intersection arterial corridor along France Avenue in Minneapolis, MN, demonstrate that the proposed model can generate accurate time-dependent travel times under various traffic conditions.     

天水市现代有轨电车系统建设可行性分析

现代有轨电车是体现国家公交优先政策的一种新型大运量公共交通方式。文章结合天水市发展实际,从道路状况、沿线用地及客流、交通组织等方面对天水市羲皇大道布设有轨电车线路的可行性进行分析,并且介绍了相关规划方案。     

Arterial traffic signal optimization: A person-based approach

This paper presents a real-time signal control system that optimizes signal settings based on minimization of person delay on arterials. The system’s underlying mixed integer linear program minimizes person delay by explicitly accounting for the passenger occupancy of autos and transit vehicles. This way it can provide signal priority to transit vehicles in an efficient way even when they travel in conflicting directions. Furthermore, it recognizes the importance of schedule adherence for reliable transit operations and accounts for it by assigning an additional weighting factor on transit delays. This introduces another criterion for resolving the issue of assigning priority to conflicting transit routes. At the same time, the system maintains auto vehicle progression by introducing the appropriate delays associated with interruptions of platoons. In addition to the fact that it utilizes readily available technologies to obtain the inputs for the optimization, the system’s feasibility in real-world settings is enhanced by its low computation time. The proposed signal control system is tested on a four-intersection segment of San Pablo Avenue arterial located in Berkeley, California. The findings show the system’s capability to outperform pretimed (i.e., fixed-time) optimal signal settings by reducing total person delay. They have also demonstrated its success in reducing bus person delay by efficiently providing priority to transit vehicles even when they travel in conflicting directions.     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

Does regional travel time unreliability influence mode choice?

Researchers and practitioners highlight the unreliability of travel as a potential weak link in the transportation system which may inhibit individuals’ accessibility and urban economic activity. With the trend towards increasing traffic congestion, the outlook suggests that travel conditions will become structurally less reliable over time, but that not all places will be equally affected. But is travel time unreliability a problem? This study uses global positioning systems travel survey data for Chicago to build a regional model of travel time unreliability. The results suggest that unreliability varies spatially during different time periods, but that the average overall network unreliability varies little across times in the day. Using the Chicago Metropolitan Agency for Planning (CMAP)’s 2007 Travel Tracker Survey, a household travel diary survey including both GPS and non-GPS components, we estimate a mode choice model for work trips to explore the influence of unreliability on travel behavior. The results suggest that unreliable auto travel conditions induce mode switching to transit and that the influence is strongest when service by train is already faster than by car. This further suggests that auto travel unreliability may have the strongest influence in metropolitan regions with highly-competitive transit systems. Nevertheless, the influence of travel unreliability is limited and is not the underlying driver of travel decision-making.     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

Integrating mesoscopic dynamic traffic assignment with agent-based travel behavior models for cumulative land development impact analysis

A number of approaches have been developed to evaluate the impact of land development on transportation infrastructure. While traditional approaches are either limited to static modeling of traffic performance or lack a strong travel behavior foundation, today’s advanced computational technology makes it feasible to model an individual traveler’s response to land development. This study integrates dynamic traffic assignment (DTA) with a positive agent-based microsimulation travel behavior model for cumulative land development impact studies. The integrated model not only enhances the behavioral implementation of DTA, but also captures traffic dynamics. It provides an advanced yet practical approach to understanding the impact of a single or series of land development projects on an individual driver’s behavior, as well as the aggregated impacts on the demand pattern and time-dependent traffic conditions. A simulation-based optimization (SBO) approach is proposed for the calibration of the modeling system. The SBO calibration approach enhances the transferability of this integrated model to other study areas. Using a case study that focuses on the cumulative land development impact along a congested corridor in Maryland, various regional and local travel behavior changes are discussed to show the capability of this tool for behavior side estimations and the corresponding traffic impacts.     

Arterial travel time estimation based on vehicle re-identification using wireless magnetic sensors

A practical system is described for the real-time estimation of travel time across an arterial segment with multiple intersections. The system relies on matching vehicle signatures from wireless sensors. The sensors provide a noisy magnetic signature of a vehicle and the precise time when it crosses the sensors. A match (re-identification) of signatures at two locations gives the corresponding travel time of the vehicle. The travel times for all matched vehicles yield the travel time distribution. Matching results can be processed to provide other important arterial performance measures including capacity, volume/capacity ratio, queue lengths, and number of vehicles in the link. The matching algorithm is based on a statistical model of the signatures. The statistical model itself is estimated from the data, and does not require measurement of ‘ground truth’. The procedure does not require measurements of signal settings; in fact, signal settings can be inferred from the matched vehicle results. The procedure is tested on a 1.5 km (0.9 mile)-long segment of San Pablo Avenue in Albany, CA, under different traffic conditions. The segment is divided into three links: one link spans four intersections, and two links each span one intersection.     

Revisiting the relationship between traffic congestion and the economy: a longitudinal examination of U.S. metropolitan areas

Conventional transportation practices typically focus on alleviating traffic congestion affecting motorists during peak travel periods. One of the underlying assumptions is that traffic congestion, particularly during these peak periods, is harmful to a region’s economy. This paper seeks to answer a seemingly straightforward question: is the fear of the negative economic effects of traffic congestion justified, or is congestion merely a nuisance with little economic impact? This research analyzed 30 years of data for 89 US metropolitan statistical areas (MSAs) to evaluate the economic impacts of traffic congestion at the regional level. Employing a two-stage, least squares panel regression model, we controlled for endogeneity using instrumental variables and assessed the association between traffic congestion and per capita gross domestic product (GDP) as well as between traffic congestion and job growth for an 11-year time period. We then investigated the relationship between traffic congestion and per capita income for those same 11 years as well as for the thirty-year time period (1982–2011) when traffic congestion data were available. Controlling for the key variables found to be significant in the existing literature, our results suggest that the potential negative impact of traffic congestion on the economy does not deserve the attention it receives. Economic productivity is not significantly negatively impacted by high levels of traffic congestion. In fact, the results suggest a positive association between traffic congestion and per capita GDP as well as between traffic congestion and job growth at the MSA level. There was a statistically insignificant effect on per capita income. There may be valid reasons to continue the fight against congestion, but the idea that congestion will stifle the economy does not appear to be one of them.

     

Reprint of: Modelling the impact of traffic incidents on travel time reliability

Traffic incidents are recognised as one of the key sources of non-recurrent congestion that often leads to reduction in travel time reliability (TTR), a key metric of roadway performance. A method is proposed here to quantify the impacts of traffic incidents on TTR on freeways. The method uses historical data to establish recurrent speed profiles and identifies non-recurrent congestion based on their negative impacts on speeds. The locations and times of incidents are used to identify incidents among non-recurrent congestion events. Buffer time is employed to measure TTR. Extra buffer time is defined as the extra delay caused by traffic incidents. This reliability measure indicates how much extra travel time is required by travellers to arrive at their destination on time with 95% certainty in the case of an incident, over and above the travel time that would have been required under recurrent conditions. An extra buffer time index (EBTI) is defined as the ratio of extra buffer time to recurrent travel time, with zero being the best case (no delay). A Tobit model is used to identify and quantify factors that affect EBTI using a selected freeway segment in the Southeast Queensland, Australia network. Both fixed and random parameter Tobit specifications are tested. The estimation results reveal that models with random parameters offer a superior statistical fit for all types of incidents, suggesting the presence of unobserved heterogeneity across segments. What factors influence EBTI depends on the type of incident. In addition, changes in TTR as a result of traffic incidents are related to the characteristics of the incidents (multiple vehicles involved, incident duration, major incidents, etc.) and traffic characteristics.     

Traffic flow on signalized streets

This paper considers a signalized street of uniform width and blocks of various lengths. Its signals are pretimed in an arbitrary pattern, and traffic on it behaves as per the kinematic-wave/variational theory with a triangular fundamental diagram. It is shown that the long run average flow on the street when the number of cars on the street (i.e. the street’s density) is held constant is given by the solution of a linear program (LP) with a finite number of variables and constraints. This defines a point on the street’s macroscopic fundamental diagram. For the homogeneous special case where the block lengths and signal timings are identical, all the LP constraints but one are redundant and the result has a closed form. In this case, the LP recipe matches and simplifies the so-called “method of cuts”. This establishes that the method of cuts is exact for homogeneous problems. However, in the more realistic inhomogeneous case the difference between the two methods can be arbitrarily large.The paper uses the LP method to obtain the macroscopic fundamental diagrams arising under four different traffic coordination schemes for streets with four different block length configurations. It is found that the best scheme depends on the prevailing density. Curiously, the popular scheme in which all the traffic green phases are started synchronously wins only in rare circumstances. Its performance is particularly underwhelming when the street’s blocks are long. The paper also presents density-aware numerical methods to optimize the signal offsets for 1-way and 2-way streets. For 1-way streets operated with a common cycle the method reduces to a simple graphical construction . In this case the resulting flow matches the flow that would arise if all of the street’s intersections except one with the shortest green phase had been eliminated.     

Optimizing signals for arterials experiencing heavy mixed scooter-vehicle flows

Recognizing the increasing popularity of scooters among urban commuters in developing countries and the significant impacts of their dynamic maneuverability on the progression of mixed traffic, this study presents a simulation-based signal optimization model for arterials experiencing heavy scooter-vehicle flows. The proposed model consists of a macroscopic simulation and a signal optimization module, where the former functions to capture the interactions between scooter and passenger-car flows over the process of discharging, propagation, and formation of intersection queues. The latter offers a specially-designed algorithm to search for the optimal signal plan and arterial offsets, based on the complex departure and arrival patterns of mixed flows estimated with the simulation module. To account for scooters’ unique parallel moving and queue patterns in a travel lane, the proposed signal module has adopted the sub-lane concept in estimating the mixed-flow queue distribution across lanes and their discharging flow rates. The results of extensive experimental analyses with various mixed-flow scenarios confirm that the proposed model offers the potential for signal design for arterials plagued by heavy scooter-vehicle mixed flows.     

Transit competitiveness in polycentric metropolitan regions

This paper analyzes the potential to, and impacts of, increasing transit modal split in a polycentric metropolitan area – the Philadelphia, Pennsylvania region. Potential transit riders are preselected as those travelers whose trips begin and end in areas with transit-supportive land uses, defined as “activity centers,” areas of high-density employment and trip attraction. A multimodal traffic assignment model is developed and solved to quantify the generalized cost of travel by transit services and private automobile under (user) equilibrium conditions. The model predicts transit modal split by identifying the origin–destination pairs for which transit offers lower generalized cost. For those origin–destination pairs for which transit does not offer the lowest generalized cost, I compute a transit competitiveness measure, the ratio of transit generalized cost to auto generalized cost. The model is first formulated and solved for existing transit service and regional pricing schemes. Next, various transit incentives (travel time or fare reductions, increased service) and auto disincentives (higher out of pocket expenses) are proposed and their impacts on individual travel choices and system performance are quantified. The results suggest that a coordinated policy of improved transit service and some auto disincentives is necessary to achieve greater modal split and improved system efficiency in the region. Further, the research finds that two levels of coordinated transit service, between and within activity centers, are necessary to realize the greatest improvements in system performance.