共查询到18条相似文献,搜索用时 188 毫秒
1.
为使船舶设计人员在分析型船资料估算空船重量时快速选择适合的估算方法,分析目前典型的空船重量的估算方法适用的情况以及精确度。"从两个吃水的载重量估算空船重量"方法仅利用母型船的设计吃水和结构吃水估算空船重量;"BP神经网络估算空船重量"方法是基于详细的母型船数据库建立的神经网络模型;"统计回归方法估算空船重量"方法是基于详细的母型船数据库分解船舶结构,利用统计回归的方法。经分析发现:"从两个吃水的载重量估算空船重量"方法适用于设计初期阶段并缺少更为详细的母型船资料的情况;"BP神经网络估算空船重量"方法只适用于个别掌握此项技术的设计人员,不具有推广性;"统计回归方法"则是更为普通的估算方法,但需要详尽的数据库才可以将船型归类分组得出精确的空船重量系数。 相似文献
2.
3.
4.
5.
多学科设计优化(MDO)是解决复杂系统工程问题的有效手段。通过对大型舰艇多学科设计优化船体结构子系统设计方法进行研究,将船体结构设计分为船体横剖面结构布置方案自动生成、船体横剖面结构方案优选、船体结构重量估算3个步骤;根据总体方案提供的主尺度、横剖面外形轮廓和分层分舱等信息,依据骨材(桁材)均匀布置和余量控制的原则,生成船体横剖面结构布置方案,并提出一套参考母型船设计,确定设计船构件尺寸初值的方法;在船体横剖面结构方案优选过程中,采用调用代理模型代替板架有限元仿真模型的方法来减少结构分析的计算时间,并采用组合法获得重量最轻的设计方案。 相似文献
6.
本文在5800DWT双壳体油船结构设计过程中对MARPOL73/78附则I13F条款认识的基础上,着重就船舶主尺度要素对双壳体油船的影响,货舱容设计计算以及船体结构重量估算等问题进行了讨论。 相似文献
7.
本文根据船舶设计与研究工作的经验,从船舶设计角度,简述了影响船体结构重量的因素,并结合实际,着重探讨了船舱划分对船体结构重量的影响。 相似文献
8.
9.
针对某冷藏运输船更换调距桨叶时需预先确定船体有效功率的问题,用爱尔法对弗劳德数、方形系数、爱尔系数和船体有效功率进行估算。文章介绍该冷藏船的主要参数;分析爱尔法估算船体有效功率的原理、计算表达式和爱尔标准船型参数;计算该冷藏船标准方形系数、爱尔系数,并根据实船方形系数、船宽比、浮心纵向坐标和水线长与标准值的差异分别修正爱尔系数;根据爱尔法估算不同船速的船体有效功率,并与实船试验计算结果进行比较。结果表明,爱尔法估算的船体有效功率与实船试验计算结果比较吻合,可用来对中小型民用船舶的船体有效功率进行估算。 相似文献
10.
11.
12.
为解决船体分段任务包工时定额的计算过度依赖线性公式而忽略工时定额与工艺参数之间的非线性关系的问题,提高工时定额计算的效率和精确度,将PSO-BP神经网络技术应用到船体分段任务包工时定额中。通过对影响船体分段中间产品额定工时的工艺参数进行分析,建立多输入单输出的PSO-BP神经网络模型,并应用实际数据对PSO-BP神经网络进行训练,测试仿真结果与实际值之间的误差在允许范围内。验证结果表明,采用PSO-BP神经网络建立船体分段任务包工时定额模型,能对任务包作业工时进行准确预测。 相似文献
13.
深海载人潜水器耐压球壳设计特性分析 总被引:5,自引:0,他引:5
回顾了国内外深海载人潜水器载人球壳的设计现状,对国际上6 000米级载人球壳的特征进行了分析比较,并采用塑性分析方法对不同内径的钛合金载人球壳给出了设计厚度和重量特性,分别探讨了安全系数、球壳内径、体积密度、球壳重量等设计因素. 相似文献
14.
15.
16.
Systematic theoretical and experimental studies were carried out to establish methods for hull form design, optimum dimension
selection, and resistance estimation for displacement-type super-high-speed ships. In this study, a theoretical hull form
design method for displacement-type super-high-speed ships was first developed using the minimum resistance theory and a sectionally
varying hull form equation. Using an established hull form design method, a series of 60 hull forms were prepared with systematic
variations of the most important design variables, and model tests were conducted for these ship models. Finally, regression
analyses were performed for the results of the model tests. The study was very successful, and the prepared computer programs
are now being actively used as efficient tools for the design of the displacement-type super-high-speed ships. 相似文献
17.
18.
Chang Doo Jang Jong Jin Jung Alexander A. Korobkin 《Journal of Marine Science and Technology》2007,12(2):95-101
This article describes an estimation method for the hull girder response of a ship due to springing. The linear and nonlinear
springing effects on the hull girder are evaluated. Previous studies on the springing response focused mainly on the symmetric
response, or vertical response. In this article, however, the springing analysis is extended to asymmetric responses, or horizontal
and torsional responses. The Timoshenko beam model was used to calculate the hull girder response and the quadratic strip
method was employed to calculate hydrodynamic forces and moments on the hull. To remove irregular frequencies, a rigid lid
was adopted on the hull free surface level and hydrodynamic coefficients were interpolated for asymptotic values. Applications
to two ships for the symmetric and asymmetric responses were carried out and the effect of springing responses is also discussed. 相似文献