A reliability-based assignment method for railway networks with heterogeneous passengers

Travel reliability can play an important role in shaping travelers’ route choice behavior. This paper develops a railway passenger assignment method to capture the reliability-based route choices, where the trains can have stochastic delays. The overall travel reliability has two components: the travel time reliability (of trains) and the associated transfer reliability (of connections). In this context, mean-and-variance-based effective travel cost is adopted to model passengers’ evaluation of different travel options in the railway network. Moreover, passengers are heterogeneous as they may evaluate the effective travel cost differently, and they may have different requirements for the successful transfer probability (if transfers are involved in the trip). The determination of travel time reliability (of trains) is based on the travel delay distribution, and the successful transfer probability is calculated based on the delay probabilities of two trains in the transfer process. An algorithm has been designed for solving the model, and numerical examples are presented to test and illustrate the model.     

A bi‐level programming approach — Optimal transit fare under line capacity constraints

The fare of a transit line is one of the important decision variables for transit network design. It has been advocated as an efficient means of coordinating the transit passenger flows and of alleviating congestion in the transit network. This paper shows how transit fare can be optimized so as to balance the passenger flow on the transit network and to reduce the overload delays of passengers at transit stops. A bi‐level programming method is developed to optimize the transit fare under line capacity constraints. The upper‐level problem seeks to minimize the total network travel time, while the lower‐level problem is a stochastic user equilibrium transit assignment model with line capacity constraints. A heuristic solution algorithm based on sensitivity analysis is proposed. Numerical example is used to illustrate the application of the proposed model and solution algorithm.     

Simultaneous optimization of transit line configuration and passenger line assignment

Passenger transportation in most large cities relies on an efficient mass transit system, whose line configuration has direct impacts on the system operating cost, passenger travel time and line transfers. Unfortunately, the interplay between transit line configuration and passenger line assignment has been largely ignored in the literature. This paper presents a model for simultaneous optimization of transit line configuration and passenger line assignment in a general network. The model is formulated as a linear binary integer program and can be solved by the standard branch and bound method. The model is illustrated with a couple of minimum spanning tree networks and a simplified version of the general Hong Kong mass transit railway network.     

Itinerary choice and advance ticket booking for high-speed-railway network services

This paper formulates and examines the passenger flow assignment (itinerary choice) problem in high-speed railway (HSR) systems with multiple-class users and multiple-class seats, given the train schedules and time-varying travel demand. In particular, we take into account advance booking cost of travelers in the itinerary choice problem. Rather than a direct approach to model advance booking cost with an explicit cost function, we consider advance booking cost endogenously, which is determined as a part of the passenger choice equilibrium. We show that this equilibrium problem can be formulated as a linear programming (LP) model based on a three-dimension network representation of time, space, and seat class. At the equilibrium solution, a set of Lagrange multipliers for the LP model are obtained, which are associated with the rigid in-train passenger capacity constraints (limited numbers of seats). We found that the sum of the Lagrange multipliers along a path in the three-dimension network reflects the advance booking cost of tickets (due to advance/early booking to guarantee availability) perceived by the passengers. Numerical examples are presented to demonstrate and illustrate the proposed model for the passenger assignment problem.     

A reliability‐based traffic assignment model for multi‐modal transport network under demand uncertainty

In densely populated and congested urban areas, the travel times in congested multi‐modal transport networks are generally varied and stochastic in practice. These stochastic travel times may be raised from day‐to‐day demand fluctuations and would affect travelers' route and mode choice behaviors according to their different expectations of on‐time arrival. In view of these, this paper presents a reliability‐based user equilibrium traffic assignment model for congested multi‐modal transport networks under demand uncertainty. The stochastic bus frequency due to the unstable travel time of bus route is explicitly considered. By the proposed model, travelers' route and mode choice behaviors are intensively explored. In addition, a stochastic state‐augmented multi‐modal transport network is adopted in this paper to effectively model probable transfers and non‐linear fare structures. A numerical example is given to illustrate the merits of the proposed model. Copyright © 2012 John Wiley & Sons, Ltd.     

Stochastic transit equilibrium

We present a transit equilibrium model in which boarding decisions are stochastic. The model incorporates congestion, reflected in higher waiting times at bus stops and increasing in-vehicle travel time. The stochastic behavior of passengers is introduced through a probability for passengers to choose boarding a specific bus of a certain service. The modeling approach generates a stochastic common-lines problem, in which every line has a chance to be chosen by each passenger. The formulation is a generalization of deterministic transit assignment models where passengers are assumed to travel according to shortest hyperpaths. We prove existence of equilibrium in the simplified case of parallel lines (stochastic common-lines problem) and provide a formulation for a more general network problem (stochastic transit equilibrium). The resulting waiting time and network load expressions are validated through simulation. An algorithm to solve the general stochastic transit equilibrium is proposed and applied to a sample network; the algorithm works well and generates consistent results when considering the stochastic nature of the decisions, which motivates the implementation of the methodology on a real-size network case as the next step of this research.     

An integrated Bayesian approach for passenger flow assignment in metro networks

This paper proposes an integrated Bayesian statistical inference framework to characterize passenger flow assignment model in a complex metro network. In doing so, we combine network cost attribute estimation and passenger route choice modeling using Bayesian inference. We build the posterior density by taking the likelihood of observing passenger travel times provided by smart card data and our prior knowledge about the studied metro network. Given the high-dimensional nature of parameters in this framework, we apply the variable-at-a-time Metropolis sampling algorithm to estimate the mean and Bayesian confidence interval for each parameter in turn. As a numerical example, this integrated approach is applied on the metro network in Singapore. Our result shows that link travel time exhibits a considerable coefficient of variation about 0.17, suggesting that travel time reliability is of high importance to metro operation. The estimation of route choice parameters conforms with previous survey-based studies, showing that the disutility of transfer time is about twice of that of in-vehicle travel time in Singapore metro system.     

A stochastic transit assignment model using a dynamic schedule-based network

Using the schedule-based approach, in which scheduled time-tables are used to describe the movement of vehicles, a dynamic transit assignment model is formulated. Passengers are assumed to travel on a path with minimum generalized cost which consists of four components: in-vehicle time; waiting time; walking time; and a time penalty for each line change. With the exception of in-vehicle time, each of the other cost components is weighted by a sensitivity coefficient which varies among travelers and is defined by a density function. This time-dependent and stochastic minimum path is generated by a specially developed branch and bound algorithm. The assignment procedure is conducted over a period in which both passenger demand and train headways are varying. Due to the stochastic nature of the assignment problem, a Monte Carlo approach is employed to solve the problem. A case study using the Mass Transit Railway System in Hong Kong is given to demonstrate the model and its potential applications.     

Transportation serviceability analysis for metropolitan commuting corridors based on modal choice modeling

Major commuting corridors in metropolitan areas generally comprise multiple transportation modes for commuters, such as transit (subways or buses), private vehicles, or park-and-ride combinations. During the morning peak hour, the commuters would choose one of the available transportation modes to travel through the corridors from rural/suburban living areas to urban working areas. This paper introduces a concept of transportation serviceability to evaluate a transportation mode’s service status in a specific link, route, road, or network during a certain period. The serviceability can be measured by the possibility that travelers choose a specific type of transportation service at a certain travel cost. The commuters’ modal-choice possibilities are calculated using a stochastic equilibrium model based on general travel cost. The modeling results illustrate how transportation serviceability is influenced by background traffic flow in a corridor, value of comfort for railway mode, and parking fee distribution.     

Sensitivity analysis on stochastic equilibrium transportation networks using genetic algorithm

This study deals with the sensitivity analysis of an equilibrium transportation networks using genetic algorithm approach and uses the bi‐level iterative sensitivity algorithm. Therefore, integrated Genetic Algorithm‐TRANSYT and Path Flow Estimator (GATPFE) is developed for signalized road networks for various level of perceived travel time in order to test the sensitivity of perceived travel time error in an urban stochastic road networks. Level of information provided to drivers correspondingly affects the signal timing parameters and hence the Stochastic User Equilibrium (SUE) link flows. When the information on road system is increased, the road users try to avoid conflicting links. Therefore, the stochastic equilibrium assignment concept tends to be user equilibrium. The GATPFE is used to solve the bi‐level problem, where the Area Traffic Control (ATC) is the upper‐level and the SUE assignment is the lower‐level. The GATPFE is tested for six‐junction network taken from literature. The results show that the integrated GATPFE can be applied to carry out sensitivity analysis at the equilibrium network design problems for various level of information and it simultaneously optimize the signal timings (i.e. network common cycle time, signal stage and offsets between junctions).     

Route Choice Models Used in the Stochastic User Equilibrium Problem: A Review

Several route choice models are reviewed in the context of the stochastic user equilibrium problem. The traffic assignment problem has been extensively studied in the literature. Several models were developed focusing mainly on the solution of the link flow pattern for congested urban areas. The behavioural assumption governing route choice, which is the essential part of any traffic assignment model, received relatively much less attention. The core of any traffic assignment method is the route choice model. In the wellknown deterministic case, a simple choice model is assumed in which drivers choose their best route. The assumption of perfect knowledge of travel costs has been long considered inadequate to explain travel behaviour. Consequently, probabilistic route choice models were developed in which drivers were assumed to minimize their perceived costs given a set of routes. The objective of the paper is to review the different route choice models used to solve the traffic assignment problem. Focus is on the different model structures. The paper connects some of the route choice models proposed long ago, such as the logit and probit models, with recently developed models. It discusses several extensions to the simple logit model, as well as the choice set generation problem and the incorporation of the models in the assignment problem.     

Evaluating the benefits of a combined route guidance and road pricing system in a traffic network with recurrent congestion

When drivers do not have complete information on road travel time and thus choose their routes in a stochastic manner or based on their previous experience, separate implementations of either route guidance or road pricing cannot drive a stochastic network flow pattern towards a system optimum in a Wardropian sense. It is thus of interest to consider a combined route guidance and road pricing system. A road guidance system could reduce drivers' uncertainty of travel time through provision of traffic information. A driver who is equipped with a guidance system could be assumed to receive complete information, and hence be able to find the minimum travel time routes in a user-optimal manner, while marginal-cost road pricing could drive a user-optimal flow pattern toward a system optimum. Therefore, a joint implementation of route guidance and road pricing in a network with recurrent congestion could drive a stochastic network flow pattern towards a system optimum, and thus achieve a higher reduction in system travel time. In this paper the interaction between route guidance and road pricing is modeled and the potential benefit of their joint implementation is evaluated based on a mixed equilibrium traffic assignment model. The private and system benefits under marginal-cost pricing and varied levels of market penetration of the information systems are investigated with a small and a large example. It is concluded that the two technologies complement each other and that their joint implementation can reduce travel time more efficiently in a network with recurrent congestion.     

Train rescheduling model with train delay and passenger impatience time in urban subway network

This paper considers the train rescheduling problem with train delay in urban subway network. With the objective of minimizing the negative effect of train delay to passengers, which is quantified with a weighted combination of travel time cost and the cost of giving up the planned trips, train rescheduling model is proposed to jointly synchronize both train delay operation constraints and passenger behavior choices. Space–time network is proposed to describe passenger schedule‐based path choices and obtain the shortest travel times. Impatience time is defined to describe the intolerance of passengers to train delay. By comparing the increased travel time due to train delay with the passenger impatience time, a binary variable is defined to represent whether the passenger will give up their planned trips or not. The proposed train rescheduling model is implemented using genetic algorithm, and the model effectiveness is further examined through numerical experiments of real‐world urban subway train timetabling test. Duration effects of the train delay to the optimization results are analyzed. Copyright © 2017 John Wiley & Sons, Ltd.     

A dynamic stochastic assignment model for the analysis of general networks

The paper adopts the framework employed by the existing dynamic assignment models, which analyse specific network forms, and develops a methodology for analysing general networks. Traffic conditions within a link are assumed to be homogeneous, and the time varying O-D travel times and traffic flow patterns are calculated using elementary relationships from traffic flow theory and link volume conservation equations. Each individual is assumed to select a departure time and a route by trading off the travel time and schedule delay associated with each alternative. A route is considered as reasonable if it includes only links which do not take the traveller back to the origin. The set of reasonable routes is not consistant but depends on the time that an individual decides to depart from his origin. Equilibrium distributions are derived from a Markovian model which describes the evolution of travel patterns from day to day. Numerical simulation experiments are conducted to analyse the impact of different work start time flexibilities on the time dependent travel patterns. The similarity between link flows and travel times obtained from static and dynamic stochastic assignment is investigated. It is shown that in congested networks the application of static assignment results in travel times which are lower than the ones predicted by dynamic assignment.     

Optimal traffic assignment to urban streets with air pollution consideration

Traffic assignment is usually determined solely on the basis of minimum travel time through the network. The present study on traffic assignment has taken into account not only traffic performance but also air quality over the street. A simple model of highway air pollution is developed by considering macroscopic material balance of polluted air mass over a segment of a highway that passes through an urban area, A new traffic assignment scheme has been developed based on the air pollution model. The optimal traffic assignment obtained by the new scheme is affected significantly by meteorological conditions.     

Exploring passenger anxiety associated with train travel

Although people are often encouraged to use public transportation, the riding experience is not always comfortable. This study uses service items to measure passenger anxieties by applying a conceptual model based on the railway passenger service chain perspective. Passenger anxieties associated with train travel are measured using a modern psychometric method, the Rasch model. This study surveys 412 train passengers. Analytical results indicate that the following service items cause passenger anxiety during trains travel: crowding, delays, accessibility to a railway station, searching for the right train on a platform, and transferring trains. Empirical results obtained using the Rasch approach can be used to derive an effective strategy to reduce train passenger anxiety. This empirical study also demonstrates that anxiety differs based on passenger sex, age, riding frequency, and trip type. This information will also prove useful for transportation planners and policy-makers when considering the special travel needs of certain groups to create a user-friendly railway travel environment that promotes public use.     

Improvement of the volume-delay function by incorporating the impact of trucks on traffic flow

In current transportation modelling, travel time is the most important factor in decisions regarding transport modes, destinations and routes. The calculation of travel time is deployed by volume-delay functions (VDFs), a sub-model of route assignment procedure, using the correlation between increasing numbers of vehicles on a road and the road's restrictive capacity. By investigating existing VDFs, a clear gap is seen, demonstrating that current functions are not suited to reflect the empirically known large impact of trucks on passenger car travel times. This issue becomes crucial when transport models are used to reflect future scenarios where goods transportation is expected to increase greatly, and when transport models combine passenger and commercial traffic. This paper presents a new VDF which successfully includes trucks’ impact on traffic flow in the case of Germany and, with slight deviations, for North America. The function is developed using ideal-type data for German motorways. The differences between German and US data and their implications for VDFs are also discussed.     

Integrating robust timetabling in line plan optimization for railway systems

We propose a heuristic algorithm to build a railway line plan from scratch that minimizes passenger travel time and operator cost and for which a feasible and robust timetable exists. A line planning module and a timetabling module work iteratively and interactively. The line planning module creates an initial line plan. The timetabling module evaluates the line plan and identifies a critical line based on minimum buffer times between train pairs. The line planning module proposes a new line plan in which the time length of the critical line is modified in order to provide more flexibility in the schedule. This flexibility is used during timetabling to improve the robustness of the railway system. The algorithm is validated on the DSB S-tog network of Copenhagen, which is a high frequency railway system, where overtakings are not allowed. This network has a rather simple structure, but is constrained by limited shunt capacity. While the operator and passenger cost remain close to those of the initially and (for these costs) optimally built line plan, the timetable corresponding to the finally developed robust line plan significantly improves the minimum buffer time, and thus the robustness, in eight out of ten studied cases.     

A simulation model of the bus transitway (TRNSIM)

For planning and design of a bus rapid transit system and for the analysis of multimodal corridors, methodology is required for simulating bus traffic operation on a Transitway. Macroscopic models of vehicle flow are gaining popularity due to their capability to analyze complex operations and yet offer efficiency in development and applications. A macroscopic model is developed for the investigation of travel time, energy and emissions that correspond to bus volume levels on the Transitway. This paper describes the travel time part of the model. The model treats stochastic characteristics of bus traffic and passenger activities. Also, safety regimes in vehicle flow and factors affecting minimum headways in station areas are incorporated. The model is verified by comparing simulated travel time for the Ottawa-Carleton Transitway with actual data.