汽车主动悬架的单神经元自适应控制

在1/4汽车动力学模型的基础上,设计了汽车主动悬架的自适应神经元控制器。以车辆的行驶平顺性为主要控制目标,车身垂直加速度、悬架动挠度、车轮动位移为具体评价参数,研究了系统在随机路面激励条件下的时域响应,计算了振动响应的均方根值,考察了在变参数条件下控制器的鲁棒性。仿真结果表明,该控制器能有效改善车辆的综合性能,尤其是平顺性和舒适性,并且具有较好的鲁棒性,对模型参数的变化有一定的适应性。     

基于免疫算法的汽车主动悬架控制研究

应用免疫算法理论,以车身垂直加速度、悬架动行程和车轮动载为控制目标,设计了基于汽车1/4模型的主动悬架控制策略。该算法利用信息熵作为评价抗体亲和力的指标,具有多样识别能力、强鲁棒性和免疫记忆功能。仿真结果表明,基于免疫控制器的主动悬架对汽车的平顺性和操纵稳定性有较明显的改善。     

车辆半主动悬架与助力转向集成控制的仿真研究

为协调车辆操纵稳定性和行驶平顺性,基于底盘系统动力学原理,建立了半主动悬架和电动助力转向的综合模型,对半主动悬架和电动助力转向系统进行集成控制.运用二次反馈法和PID策略分别对悬架的可调阻尼和转向系统的助力进行控制.仿真结果表明,在集成控制情况下,车辆的操纵稳定性和平顺性均优于悬架或转向单独控制的效果.     

Roll and pitch independently tuned interconnected suspension: modelling and dynamic analysis

In this paper, a roll and pitch independently tuned hydraulically interconnected passive suspension is presented. Due to decoupling of vibration modes and the improved lateral and longitudinal stability, the stiffness of individual suspension spring can be reduced for improving ride comfort and road grip. A generalised 14 degree-of-freedom nonlinear vehicle model with anti-roll bars is established to investigate the vehicle ride and handling dynamic responses. The nonlinear fluidic model of the hydraulically interconnected suspension is developed and integrated with the full vehicle model to investigate the anti-roll and anti-pitch characteristics. Time domain analysis of the vehicle model with the proposed suspension is conducted under different road excitations and steering/braking manoeuvres. The dynamic responses are compared with conventional suspensions to demonstrate the potential of enhanced ride and handling performance. The results illustrate the model-decoupling property of the hydraulically interconnected system. The anti-roll and anti-pitch performance could be tuned independently by the interconnected systems. With the improved anti-roll and anti-pitch characteristics, the bounce stiffness and ride damping can be optimised for better ride comfort and tyre grip.     

汽车主动悬架与电动助力转向系统自适应模糊集成控制

建立了包含转向运动模型、俯仰运动模型和侧倾运动模型的汽车整车模型,在设计了电动助力转向系统PD控制的基础上,构建了基于自适应模糊控制的汽车主动悬架与电动助力转向系统集成控制器,当控制系统偏差变小或变大时,调整因子总能保证系统稳定,便于工程应用。计算结果表明,该自适应模糊集成控制策略,既保证了车辆操纵轻便性,又显著提高了整车操纵稳定性、安全性和行驶平顺性等整车综合性能。     

Magneto-rheological suspensions for improving ground vehicle’s ride comfort,stability, and handling

ABSTRACT

A state-of-the-art discussion on the applications of magneto-rheological (MR) suspensions for improving ride comfort, handling, and stability in ground vehicles is discussed for both road and rail applications. A historical perspective on the discovery and engineering development of MR fluids is presented, followed by some of the common methods for modelling their non-Newtonian behaviour. The common modes of the MR fluids are discussed, along with the application of the fluid in valve mode for ground vehicles’ dampers (or shock absorbers). The applications span across nearly all road vehicles, including automobiles, trains, semi-trucks, motorcycles, and even bicycles. For each type of vehicle, the results of some of the past studies is presented briefly, with reference to the originating study. It is discussed that Past experimental and modelling studies have indicated that MR suspensions provide clear advantages for ground vehicles that far surpasses the performance of passive suspension. For rail vehicles, the primary advantage is in terms of increasing the speed at which the onset of hunting occurs, whereas for road vehicles – mainly automobiles – the performance improvements are in terms of a better balance between vehicle ride, handling, and stability. To further elaborate on this point, a single-suspension model is used to develop an index-based approach for studying the compromise that is offered by vehicle suspensions, using the H₂ optimisation approach. Evaluating three indices based on the sprung-mass acceleration, suspension rattlespace, and tyre deflection, it is clearly demonstrated that MR suspensions significantly improve road vehicle’s ride comfort, stability, and handling in comparison with passive suspensions. For rail vehicles, the simulation results indicate that using MR suspensions with an on-off switching control can increase the speed at which the on-set of hunting occurs by as much as 50% to more than 300%.     

汽车半主动悬架的模型参考自适应控制

在1／4车辆动力学模型的基础上，基于李雅普诺夫稳定性理论，以天棚阻尼半主动悬架为参考模型，设计了半主动悬架模型参考自适应控制器。自适应控制器包括可调前置控制器和状态反馈控制器两个部分。推导了自适应控制律与相应的约束条件。仿真结果表明：该控制器对于模型参数的不确定性具有良好的鲁棒特性。自适应控制器不仅明显降低了车身加速度，提高了平顺性，同时也使汽车的行驶安全性获得了改善，悬架动变形稍有增大。     

基于LQR控制的现代客车自适应空气悬架

长期在不良工况的道路上驾驶会降低驾驶员的乘坐舒适性。随着人们对乘坐舒适性需求不断提升,空气弹簧的优势尤为明显。文章提出了一种基于LQR控制策略的自适应空气悬架系统的创新设计方案,提出的LQR控制器采用粒子群算法进行优化。以客车空气悬架为研究对象,采用MATLAB软件对空气悬架系统的被动和自适应动力学模型进行了设计和仿真。仿真结果表明,自适应空气悬架系统在保证车辆稳定性的同时,降低了车辆在随机道路上的最大位移幅值,从而提高了车辆的平顺性。     

Designing a non-linear tracking controller for vehicle active suspension systems using an optimization process

In this paper, a new non-linear tracking controller for vehicle active suspension systems is analytically designed using an optimization process. The proposed scheme employs a realistic non-linear quarter-car model, which is composed of a hardening spring and a quadratic damping force. The control input is the external active suspension force and is determined by minimizing a performance index defined as a weighted combination of conflicting objectives, namely ride quality, handling performance and control energy. A linear skyhook model with standard parameters is used as the reference model to be tracked by the controller. The robustness of the proposed controller in the presence of modeling uncertainties is investigated. The performed analysis and the simulation results indicate that both vehicle ride comfort and handling performance can be improved using the minimum external force when the proposed non-linear controller is engaged with the model. Meanwhile, a compromise between different objectives and control energy can easily be made by regulating their respective weighting factors, which are the free parameters of the control law.     

一种引入行驶状态识别的半主动悬架PID控制修正算法

基于车辆不同行驶状态（路面不平度和车速）下悬挂质量垂向加速度和悬架动挠度响应不相同的客观事实,针对半主动悬架PID控制器无自适应能力的局限,以悬挂质量垂向加速度和悬架动挠度响应作为车辆行驶状态的识别判据．建立起一种引入行驶状态识别的半主动悬架PID控制修正算法,进而以某型轿车为对象,采用MATLAB／Simulink建立起半主动悬架PID控制的仿真模型,针对不同行驶状态计算出PID控制算法修正前、后的车辆平顺性响应并加以对比,表明所提出的PID控制修正算法是有效的。     

Development of Preview Active Suspension Control System and Performance Limit Analysis by Trajectory Optimization

The main role of the suspension system is to achieve ride comfort by reducing vibrations generated by the road roughness. The active damper is getting much attention due to its reduced cost and ability to enhance ride comfort especially when the road ahead is measurable by an environment sensor. In this study a preview active suspension control system was developed in order to improve ride comfort when the vehicle is passing over a speed bump. The control system consists of a feedback controller based on the skyhook logic and a feedforward controller for canceling out the road disturbance. The performance limit for the active suspension control system was computed via trajectory optimization to provide a measure against which to compare and validate the performance of the developed controller. The simulation results indicated that the controller of this study could enhance ride comfort significantly over the active suspension control system employing only the skyhook feedback control logic. Also the developed controller, by displaying similar control pattern as the trajectory optimization during significant time portions, proved that its control policy is legitimate.     

汽车转向与悬架系统的集成控制研究

在建立了汽车转向与悬架系统的综合模型的基础上,运用一种具有扩展的调节器结构LQG控制方法,设计了 主动悬架控制器,实现对车身横摆角速度、车身垂直加速度、车身侧倾角和俯仰角的集成控制,从而显著提高汽车的 平顺性、操纵稳定性和安全性。     

An investigation into the effect of suspension configurations on the performance of tracked vehicles traversing bump terrains

This is a theoretical investigation into the effect of various suspension configurations on a tracked vehicle performance over bump terrains. The model developed is validated using published experimental data of the modal characteristics of the vehicle. The desired performance is based on ride comfort via the mixed objective function (MOF), which combines the crest factor of bounce acceleration, bounce displacement, angular acceleration, and pitch angle. The optimisation process involves evaluating the MOF for different numbers and locations of dampers and under different rigid bump road conditions and speeds. The system responses of the selected suspension configurations in the time and frequency domains are compared against the undamped suspension. The results show that the suspension configurations have a significant effect on the vehicle mobility over bump road profiles. For a five-road–wheel half model of a tracked vehicle, the maximum number of dampers to use for ride comfort over these road bumps is three with the dampers located at wheel positions 1, 2 and 5. This confirms the current practice for many tracked vehicles with 10 road wheels. However, it is further shown that the suspension fitted with two dampers at the extreme road wheels offer the best performance over various rigid bump terrains.     

半主动空气悬架模糊控制的仿真研究

对采用模糊控制的汽车半主动空气悬架系统进行了仿真研究。建立了1／4车辆二自由度动力学模型并以其为仿真对象,设计了模糊控制器,以B级路面作为随机输入,进行了计算机仿真分析。仿真结果表明,在采用模糊控制方法后．车辆悬架可以很好地降低簧载质量的垂直加速度,从而使车辆行驶的平顺性和乘坐舒适性得到了提高。     

A novel neuro-fuzzy controller to enhance the performance of vehicle semi-active suspension systems

This paper proposes a neuro-fuzzy (NF) strategy to implement semi-active suspension in passenger vehicles. The proposed method is composed of two parts: a NF controller (NFC), to establish an efficient controller strategy to improve ride comfort and road handling (RCH), and an inverse mapping to estimate the semi-active suspension current. To effectively estimate the current needed to control the semi-active damper, an inverse mapping based on neural network, modified back-propagation (MBP) is presented. The inverse mapping is incorporated into the FC to enhance RCH. Given the relative velocity between the mass and the base and also the absolute acceleration of the mass, the FC computes the optimum damping coefficient. The fuzzy logic rules are extracted based on expert knowledge encapsulated in skyhook and groundhook. A quarter-car model was adopted for the purpose of simulating and experimenting with the proposed NFC. To verify the performance of the FC, two sets of results are reported. First, an experimental analysis was performed to demonstrate the effectiveness of the FC in comparison with the benchmark skyhook and Rakheja–Sankar controllers. Furthermore, a random input was considered to examine the robustness of the NFC in comparison with the other adopted controllers. It was shown that the developed NFC control enhances the performance of the quarter-car system significantly, in terms of both ride comfort and handling characteristics. Second, four FCs with the same control strategies were implemented on a full-vehicle model to demonstrate the effectiveness of the proposed control strategy in reducing the propensity to rollover. It was concluded that the developed FC enhances the RHC and also has the potential to increase the stability of vehicles.     

基于磁流变阻尼器的半主动车辆座椅悬架模糊控制研究

设计基于磁流变阻尼器的半主动车辆座椅悬架系统的模糊控制器。用ADAMS对系统建立三维多刚体动力学模型,用MATLAB设计系统模糊控制器,并联合两者对整个系统进行仿真。仿真和台架试验结果表明,模糊控制策略能使该系统较好抑制垂直振动加速度,提高乘坐的舒适性。     

Decentralized neuro-fuzzy control for half car with semi-active suspension system

In this paper, a decentralized neuro-fuzzy controller has been created in order to improve the ride comfort and increase the stability for half car suspension system, which used the magneto-rheological damper as a semi-active device. Firstly, relative gain array and relative disturbance gain methods have been used for deriving a relation between inputs, disturbances and outputs to select pairing with minimum interaction to design a decentralize controller. Secondary, decentralized neuro-fuzzy controllers for front and rear chassis are designed to predict the required damping force taking the acceleration of the sprung mass and desired acceleration obtained by using pole-placement method as inputs. To predict the control voltage required for producing the force predicted by the controller, the inverse neuro-fuzzy model of MR damper has been designed. Simulation by using MATLAB programs has been created. The results show that the ride comforts and vehicle stability have been improved in comparison with the passive system.     

基于统一模型的转向-悬架系统最优综合控制方法

通过对车辆底盘系统中的转向和悬架系统建立统一的数学模型,利用M atlab/S imu link仿真,结合最优控制理论,分别对被动悬架兼前轮转向系统与主动悬架兼四轮转向综合控制系统进行了对比研究。理论分析与仿真试验表明,综合控制系统下车辆的操纵稳定性和平顺性都得到了很大的提高。     

基于模糊算法的车辆半主动悬架控制

以汽车二自由度悬架系统为研究对象,针对半主动悬架系统,提出以车身加速度为控制目的的模糊控制策略。以白噪声随机响应谱作为B级路面的激励输入,对被动悬架和半主动悬架系统进行仿真研究。仿真后的被动悬架与半主动悬架对结果表明,所提出的模糊控制策略有效的降低了悬架系统被击穿的可能性,提高了汽车乘坐的舒适性。