Local joint flexibility of tubular T/Y-joints retrofitted with GFRP under in-plane bending moment

In the present paper, the Local Joint Flexibility (LJF) of tubular T/Y-joints retrofitted with Glass Fiber Reinforced Polymer (GFRP) under IPB moment is studied and discussed. For this aim, a finite element (FE) model was generated and verified with the results of available experimental data and parametric formulas. Afterward, a set of 158 finite element (FE) models was created to evaluate the efficacy of the FRP sheets (number, length, and orientation), the brace inclination angle (θ), and the non-dimensional parameters (β, τ, and γ) on the LJF coefficient (f_LJF) and the f_LJF ratio of the retrofitted to the associated un-retrofitted joint. In the FE models, the efficacy of the weld profile and the contact between the FRP and the steel members (chord, weld, and brace) was considered. Also, analysis of variance (ANOVA) is used to identify the most dominant parameters which affect the f_LJF ratios. Results showed that in the retrofitted joints, the increment of the FRP sheet number results in the notable drop of the f_LJF. But, the efficacy of the FRP sheet orientation on the f_LJF can be ignored. Despite the considerable efficacy of the FRP sheets on the behavior of the tubular joints, there was not any study on the LJF in the joints retrofitted with FRP. Hence, after an extensive parametric study, the results were used to derive a parametric equation for determining the f_LJF of T/Y-joints retrofitted with FRP. Moreover, the derived equation was checked according to the UK DoE acceptance criteria.     

SCFs in tubular X-joints retrofitted with FRP under out-of-plane bending moment

This paper presents a parametric study on the stress concentration factors (SCFs) on the chord member in tubular X-connections reinforced with fiber reinforced polymer (FRP) under out-of-plane bending moment. For this aim, a FE model was generated and validated using several available experimental tests. After that, a set of 276 FE models was created to evaluate the effect of the FRP (layer number, orientation, and material) and joint geometry (γ, τ, and β) on the SCFs. In these FE models, the contact between the FRP sheets and the steel members (chord, weld, and braces) was modeled. Results indicated that the rise of the FRP laminate number causes a notable drop of the SCFs, especially in the connections with big γ. Moreover, the increment of the elastic modulus of FRP along the fibers causes a notable decrease of the SCF. Results showed that, for certain geometrical parameters set, the SCF in an X-connection retrofitted with carbon fiber reinforced polymer (CFRP) can be down to 23% of the SCF in the associated un-retrofitted connection. Despite the notable efficacy of the FRP sheets on the drop of the SCFs in the X-connections, there is not any study or equation on the X-connections with FRP. Therefore, an equation was proposed for quantifying the SCFs in the X-connections with FRP.     

Stress concentration factors in FRP-reinforced tubular DKT joints under axial loads

The stress concentration factors (SCFs) in uniplanar fibre-reinforced polymer (FRP) DKT joints are calculated under five axial loading conditions to determine the maximum SCFs. To this end, 108 finite element models of reinforced DKT joints with different FRPs and geometrical parameters are analysed. Available experimental data and formulas are used to validate the finite element models. The validated finite element models are utilized to investigate the effects of the FRP parameters along with different geometrical parameters on the stress concentration factors in uniplanar DKT joints. The simulations show a reduction of the maximum SCF by around 40% compared to unreinforced DKT joints. The reduction effect increases significantly with increasing the FRP thickness and the number of layers. Despite the notable efficacy of the FRP sheets on the drop of the SCFs in the X-connections, there is not any study or equation on the X-joints with FRP. Therefore, a precise equation is proposed for quantifying the SCFs in X-connections with FRP and is checked against the UK DoE acceptance standard.     

对接接头焊趾应力集中有限元分析

研究焊缝几何参数对应力集中的影响,对于提高焊接结构疲劳强度有重要的意义.本文采用有限元方法,计算了双侧对称加强高和单侧加强高的对接接头焊趾处的应力集中系数,分析了几个主要参数,包括焊趾倾角、焊趾过渡圆弧半径和板厚对于应力集中系数的影响,研究了焊趾处应力集中沿板厚方向的变化情况,在分析大量计算结果的基础上给出了估算两种形式的对接接头应力集中系数的经验公式.结果表明,减小焊趾倾角,增大过渡圆弧半径,可以减缓焊趾处截面形状的变化,改善焊趾处的应力集中;板厚的增加使得应力集中系数增大.并且单侧加强高的对接接头应力集中系数小于双侧对称加强高对接接头的,其减小幅度只与θ有关.     

Study on hot spot stress distribution of three-planar tubular Y-joints subjected to in-plane bending moment

The three-planar tubular Y-joint (3Y-joint) is the main part of the fatigue assessment of tripod substructures of offshore wind turbines (OWTs). As typical multiplanar tubular joints, 3Y-joints are affected a lot by multiplanar interaction between braces. Moreover, the locations of hot spot stress (HSS) can vary considerably under different load types. Thus, the distributions of stress concentration factor (SCF) and multiplanar interaction factor (MIF) along weld toe curves are necessary to calculate HSS. Considering these requirements, this study focuses on the 3Y-joint considering the wide application of the tripod substructure of OWT. A finite element (FE) analysis method is introduced and validated. Then, a numerical database is established covering common ranges of parameters used in practice. The SCF and MIF of 3Y-joint under in-plane bending moment are analyzed. Distribution formulas are proposed and proved suitable for calculating HSS in engineering design.     

轴向载荷下多平面DT型管节点应力集中系数概率模型研究

应力集中系数作为一个随机变量,对管节点及导管架平台的疲劳可靠性评估结果有着重要影响。文章以多平面DT型管节点为研究对象,建立了352个几何参数不同的三维管节点有限元模型,并分析了沿弦管-撑管焊缝处的应力集中系数分布。采用密度直方图描述最大应力集中系数统计样本的特征,利用疲劳可靠性分析中常用的几种概率分布进行拟合。各个概率模型中的参数通过极大似然估计方法得到。根据卡方检验的结果对比发现,Birnbaum-Saunders分布是最适合的概率模型。因此,文中提出一组适用于描述在轴向载荷即单向轴向和平衡轴向载荷作用下多平面DT型管节点弦管侧和撑管侧最大应力集中系数分布的概率模型,对今后导管架式海洋平台结构的疲劳可靠性分析具有重要意义。     

Geometric stress distribution along the weld toe of the outer brace in two-planar tubular DKT-joints: Parametric study and deriving the SCF design equations

Regarding the research efforts expended so far on the calculation of stress concentration factors (SCFs) in tubular joints, two major shortcomings can be noted: (a) significant effort has been devoted to the study of SCFs in various uni-planar connections. Nevertheless, for multi-planar joints which cover the majority of practical applications, very few investigations have been reported due to the complexity and high cost involved; (b) majority of these research works focused on the study of SCFs at certain positions such as the saddle, crown toe, and crown heel, and they have ignored the hot-spot stress (HSS) at other positions along the weld toe. In the present paper, effects of dimensionless geometrical parameters on the SCF distribution along the weld toe of main (outer) braces in the axially loaded right-angle two-planar tubular DKT-joints are investigated. In order to study the multi-planar effect, SCF distribution in two-planar joints is compared with the distribution in a uni-planar joint having the same geometrical properties. A complete set of SCF database is constructed based on the two-planar DKT-joint Finite element models which are verified against experimental results and the predictions of Lloyd’s Register (LR) equations. The FE models cover a wide range of geometrical parameters. Six new SCF parametric formulae are developed through nonlinear regression analyses for the accurate and reliable fatigue design of two-planar DKT-joints under axial loads. An assessment study of these equations is conducted against the experimental data, the original FEM database and the acceptance criteria recommended by the UK Department of Energy.     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

The ultimate strength of doubler plate reinforced Y-joints under compression loading

It is common practice in the offshore industry to solve the punching shear problem due to compression by using doubler plate. The finite-element method is a useful tool for studying this problem. The aim of this paper is to study the static strength of doubler plate reinforced Y-joints subjected to compression loading. The finite-element method is adopted in numerical parametric studies. The individual influences of the geometric parameters βand τd （ doubler plate to chord wall thickness ratio） and ld/d1 （ dubler plate length to brace diameter ratio） on the ultimate strength are made clear. The results show the size of plate may have important effects on the strength of reinforced joints. It is found that the ultimate strength of Y-joints reinforced with appropriately proportioned doubler plates can be greatly improved nearly up tothree times to un-reinforced Y-joints.     

双平面焊接圆管截面DKT节点的中心撑杆鞍点及冠点位置的应力集中系数(英文)

A set of parametric stress analyses was carried out for two-planar tubular DKT-joints under different axial loading conditions.The analysis results were used to present general remarks on the effects of the geometrical parameters on stress concentration factors(SCFs) at the inner saddle,outer saddle,and crown positions on the central brace.Based on results of finite element(FE) analysis and through nonlinear regression analysis,a new set of SCF parametric equations was established for fatigue design purposes.An assessment study of equations was conducted against the experimental data and original SCF database.The satisfaction of acceptance criteria proposed by the UK Department of Energy(UK DoE) was also checked.Results of parametric study showed that highly remarkable differences exist between the SCF values in a multi-planar DKT-joint and the corresponding SCFs in an equivalent uni-planar KT-joint having the same geometrical properties.It can be clearly concluded from this observation that using the equations proposed for uni-planar KT-connections to compute the SCFs in multi-planar DKT-joints will lead to either considerably under-predicting or over-predicting results.Hence,it is necessary to develop SCF formulae specially designed for multi-planar DKT-joints.Good results of equation assessment according to UK DoE acceptance criteria,high values of correlation coefficients,and the satisfactory agreement between the predictions of the proposed equations and the experimental data guarantee the accuracy of the equations.Therefore,the developed equations can be reliably used for fatigue design of offshore structures.     

FRP筋混凝土简支深梁力学性能试验研究

为解决海港工程中钢筋混凝土结构钢筋锈蚀问题,采用纤维增强塑料筋(FRP)代替传统钢筋,开展了不同配筋情况下FRP筋增强混凝土深梁的力学性能试验,对FRP深梁在荷栽作用下的截面特性、裂缝宽度、极限承载力和破坏形式等力学特性进行深入研究,为进一步在工程中开展应用提供了试验参考.     

复合材料在舰船设计建造中的应用

介绍了复合材料船舶的船体材料、设计理念、结构型式与成型工艺等技术特点及其应用和进展状况,讨论了复合材料船体设计制造开发研究中值得注意的问题。     

游艇用玻璃钢组份匹配及PATRAN软件的模拟分析

根据玻璃钢游艇对材料的使用要求,以平板为例,通过运用PATRAN有限元软件对构成平板的不同玻璃钢复合材料进行计算分析,寻求最优方案,进而确定玻璃钢材料的类型。     

工程船靠泊过程的力学分析

研究了工程船靠泊过程中在橡胶护舷、靠泊船及停泊船之间传递的靠泊力及能量.在简化分析中,将靠泊船等效为一质量块,护舷结构等效为一非线性弹簧,停泊船舷侧结构等效为一线性弹簧,利用能量法推导了最大靠泊力的估算公式.此外,利用LS-DYNA有限元仿真,研究了三种不同型式的橡胶护舷作用下的靠泊力及吸能分配情况,验证了简化公式的有效性,同时为工程船在靠泊过程中的结构安全分析及护舷的选型提供参考.     

FPSO节点焊趾处的裂纹修理形状研究

对焊缝处出现的裂纹进行修理以阻止其进一步扩展,能够有效地延长FPSO焊接结构的疲劳寿命.考虑到应力集中而造成的疲劳寿命的降低,要谨慎选取修理时所采用的形状和尺寸,避免在修理后产生的表面缺陷处出现过高的应力集中.文中旨在进行三维T型焊接节点焊趾处的裂纹修理分析,为了选取合理的修理切口,首先对不同几何形状和尺寸的二维焊接修理切口,如抛物线型和椭圆型等,进行了应力集中系数的计算,并与相类似尺寸的U型切口的计算结果进行了比较.结果表明,当切口的表面半宽长于其深度时,椭圆型的裂纹修理切口具有更低的应力集中系数.随后,选择应力集中较小的椭圆型和U型切口焊接修理形状,并采用更加精确的三维有限元分析方法进行分析,给出了通过打磨等修理方式消除裂纹后得到的三维表面缺陷的应力集中系数,为工程上焊趾处裂纹的修理提供决策依据.     

Improved design formulas for the ultimate strength of platings with circular openings and manholes under uniaxial compression

The paper focuses on the ultimate strength of perforated platings with circular openings and manholes, eventually reinforced by ringed or carling stiffeners, in order to develop a comprehensive and rationale format, useful to assess the ultimate capacity of perforated plate panels under uniaxial compression. In this respect, a large number of FE simulations is performed by Ansys Mechanical APDL, in order to provide new design formulas for the ultimate strength of platings with circular openings or manholes and, subsequently, for perforated plate panels reinforced by local stiffeners. The design formulas are developed by properly varying the opening size and the scantlings of ringed or carling stiffeners, in order to provide a comprehensive set of design curves. Hence, the incidence of the opening longitudinal position on the ultimate capacity of perforated platings, without and with local stiffeners, is also investigated. Finally, the proposed equations are applied in a straightforward design example. Based on current results, the new design formulas allow a reliable assessment of the ultimate capacity of platings with circular openings or manholes and the incidence of local stiffeners on the plating ultimate strength, so providing a rationale design format that could be easily embodied in current Rules and guidelines.     

钢筋混凝土偏压构件偏心矩增大系数计算方法探讨

由于我国不同时期不同规范对钢筋混凝土偏压构件偏心距增大系数采用的计算公式不同．导致相关设计人员对不同的偏心矩增大系数计算公式在理解上产生了一定的困难。为了明确钢筋混凝土偏压构件偏心矩增大系数概念，理解不同计算公式的含义和本质，探讨了用临界力和极限曲率来表示偏压构件偏心矩增大系数计算公式的原理，结果表明两者的本质是一致的。     

Experimental characterization of FRP composite-wood pile structural response by bending tests

A special prefabricated fiber reinforced polymer (FRP) composite shield or jacket was developed to repair wood piles in the field. Two types of load-transfer mechanisms between the wood pile and the FRP composite shield were developed and tested: (1) cement-based structural grout; and (2) steel shear connectors with an expanding polyurethane chemical grout. The objective of this paper is to characterize the structural response of full-size pre-damaged wood piles repaired with the FRP composite shield system. A three-point bending test procedure was used to simulate the response of a pile subjected to lateral loads. The load-deformation response, deflected shape profile, relative longitudinal displacements (slip), strain distribution, ultimate bending moment capacity and mode of failure were evaluated. Wood piles were pre-damaged by reducing approximately 60% of the cross-section over a portion of the pile. It was found that a pre-damaged wood pile repaired using the FRP composite shield with cement-based grout exceeded the bending capacity of a reference wood pile. The repair system using the FRP composite shield with steel shear connectors and polyurethane grout did not fully restore the bending capacity of a reference wood pile; however it can be used for marine borer protection when wood damage is not critical.     

FRP筋在自动化集装箱港区AGV重载道路中的应用

由于自动化集装箱港区AGV重载道路布设磁钉防磁的需要,混凝土面层中的传力杆采用了防磁性能良好的FRP筋。目前FRP筋尚无应用于道路的具体设计方法,借鉴传统钢制传力杆计算理论,通过建立有限元模型进行数值分析,并结合现场传荷系数试验结果,对相关设计方法的适用性进行验证并提出优化意见。     

FRP筋混凝土粘结滑移有限元分析

FRP筋与混凝土间的粘结性能是FRP筋与混凝土共同工作的基础,为充分利用FRP筋强度高的优点,避免粘结破坏,必须找出FRP筋与混凝土间的粘结滑移规律。文中基于连续曲线模型,采用特殊单元模拟FRP筋与混凝土间的粘结滑移,通过有限元分析,归纳出FRP筋与混凝土间的粘结滑移规律。