共查询到18条相似文献,搜索用时 649 毫秒
1.
2.
直线电机运载系统在首都机场线已经成功运营,通过对直线电机运载系统的总体运营、全自动驾驶、车辆维护、轨道维护、牵引能耗及车辆国产化等情况进行调研与后评估,发现直线电机运载系统各项指标均达到当初设计目标,运营维护情况良好,归纳直线电机运载系统的优缺点。在后续直线电机线路设计中,借鉴相关运营经验,充分考虑运营维护的便利性和经济性,并将直线电机运载系统各子系统统筹考虑,如车—轨匹配、车—信号匹配等,达到全系统的最优。对于中运量、小半径曲线、大纵坡路段较多的线路,直线电机运载系统具备较好的适应性。为今后城市轨道交通中低运量线路规划与车辆选项提供相关经验,并为选用直线电机运载系统的线路设计与建设提供参考及优化建议。 相似文献
3.
4.
5.
广州地铁四号线直线电机轨道系统的设计特点 总被引:2,自引:2,他引:0
张庆 《铁道标准设计通讯》2006,(Z1):147-150
针对国外直线电机应用现状,结合广州地铁的具体工况,介绍广州地铁四号线直线电机轨道系统的主要结构,并着重阐述直线电机牵引系统中轨道结构设计特点,为直线电机轨道系统的结构研究与推广应用提供设计参考。 相似文献
6.
7.
广州地铁直线电机传动车辆 总被引:1,自引:0,他引:1
为了适应4、5号线复杂线路的特殊要求,广州地铁4、5号线采用了直线电机车辆系统.比较了直线电机车辆与普通旋转电机车辆的关键技术,介绍了广州地铁直线电机车辆系统的一些技术特点. 相似文献
8.
直线电机轨道交通系统的轨道系统与直线电机系统的接口设计与传统地铁有较大不同,在对传统轮轨系统轨道设计总结的基础上,结合直线电机轨道的特点,对直线电机轨道接口设计进行分析,并介绍其在广州市轨道交通4号线的应用情况。 相似文献
9.
直线电机牵引系统的减振轨道结构设计研究 总被引:2,自引:1,他引:1
简述了直线电机系统的轨道结构特点。根据国外直线电机地铁的试验测试数据,提出了其环境评价振源强度的取值问题。针对直线电机系统对轨道的特殊要求,通过对碎石道床、浮置板轨道、弹性长轨枕整体道床在直线电机系统中的减振比较分析,认为弹性长轨枕整体道床能满足直线电机系统对轨道的减振降噪要求。 相似文献
10.
直线感应电机悬挂技术 总被引:7,自引:0,他引:7
论述直线电机悬挂系统对于直线电机地铁、轻轨车辆运行性能的影响,对加拿大、日本开发的电机定子悬挂技术进行介绍并分析优缺点,指出直线感应电机悬挂技术是我国实现直线电机轨道交通国产化的关键,应加强技术攻关。 相似文献
11.
分析城市轨道交通直线电机系统的技术发展、特点和优势,结合实际情况,探讨直线电机系统在重庆市轨道交通1号线中应用的可行性和前景。 相似文献
12.
直线电机轮轨交通系统牵引能耗研究 总被引:1,自引:0,他引:1
直线电机轮轨交通系统牵引能耗高的缺点影响了这一新型城市轨道交通制式在我国的推广应用。本文研究了城市轨道交通系统能耗特征,介绍了国内外已运营直线电机轮轨交通系统的能耗状况,并对基于电机效率的牵引能耗对比研究、列车牵引能耗模拟比较研究、广州地铁4号线列车牵引能耗实测及模拟比较研究等多个直线电机轮轨交通系统牵引能耗研究成果和实测数据进行了比较分析。基于"完成相同运输任务"的比较原则,分别针对重庆地铁1号线地下线区段和高架线区段,进行了直线电机轮轨交通系统和旋转电机驱动轮轨交通系统的牵引能耗仿真计算。经综合比较研究,得出直线电机轮轨交通系统牵引能耗比旋转电机驱动轮轨交通系统高25%以上的结论。 相似文献
13.
14.
直线电机车辆牵引传动系统研究 总被引:2,自引:0,他引:2
分析直线电机车辆牵引传动系统的特点:结合实例,对直线电机车辆传动系统中各个环节进行比较分析;对目前应用于直线电机的控制方式进行比较研究,并针对我国直线电机车辆的城市轨道交通系统的发展提出建议。 相似文献
15.
针对用于磁悬浮列车的直线感应电动机实验台,介绍了一套对直线感应电动机实验数据进行采集、分析和处理的数据采集系统。该系统可对实验中的各种数据进行实时采集、显示、控制、存储和分析。 相似文献
16.
针对直线感应电机所特有的动态边端效应,分析了采用永磁体实施边端效应补偿方法的特点,设计了基于DSP的永磁体补偿器控制系统,实验结果表明,该系统对动态边端效应有良好的补偿作用,在额定频率下运行时,采用该补偿系统后,直线感应电机的入端检测点磁场强度提升了约80%. 相似文献
17.
18.
Zhang K.-L.Liu X.-J.Zhang W.-L. 《铁道工程学报》2014,(9):102-107
Research purposes: Based on Maxwell equations and T-type equivalent circuit of linear induction motor, we analyze the electromagnetic thrust output of a double-sided linear induction motor in the case of edge effect, and use the finite element method and simulation to test the effectiveness of the theoretical calculation. We further derivate the mathematical expressions of a double-sided linear induction motor, build the simulation model by parameter design, and experimentally analyze the slip frequency control thrust output in conditions of different operating. Through analysis of the output characteristics of the electromagnetic force, optimal control of constant current slip frequency is achieved. Research conclusions: (1) We calculate various mechanical properties of a bilateral linear induction motor through its mathematical model and equivalent circuit, and derive the corrected coefficients of the horizontal and vertical edge effect. When the motor runs at a high speed, the edge effect has little influence on the output of the electromagnetic force. (2) We use the finite element computer software to establish the simulation model of a bilateral linear induction motor, and compare the theoretical calculation and simulation data: the simulation results are consistent with theoretical calculation, thus ensuring the validity of the mathematical model. (3) We simulate and analyze the influence of slip frequency, speed, suspension air gap, and length of the mover on electromagnetic force. At different speeds, properly adjusting the slip frequency can increase the output of electromagnetic force. For low speed, the optimal slip frequency is near 2 Hz; for high speed, the optimal slip frequency is between 4.0 Hz and 6.0 Hz. When satisfying the motor's rated condition, the optimal control of electromagnetic force is achieved. (4) The research result of double-sided linear induction motor can provide important implications for the electromagnetic launch system of an aircraft carrier. 相似文献