Roll- and pitch-plane coupled hydro-pneumatic suspension

Passive fluidically coupled suspensions have been considered to offer a promising alternative solution to the challenging design of a vehicle suspension system. A theoretical foundation, however, has not been established for fluidically coupled suspension to facilitate its broad applications to various vehicles. The first part of this study investigates the fundamental issues related to feasibility and properties of the passive, full-vehicle interconnected, hydro-pneumatic suspension configurations using both analytical and simulation techniques. Layouts of various interconnected suspension configurations are illustrated based on two novel hydro-pneumatic suspension strut designs, both of which provide a compact design with a considerably large effective working area. A simplified measure, vehicle property index, is proposed to permit a preliminary evaluation of different interconnected suspension configurations using qualitative scaling of the bounce-, roll-, pitch- and warp-mode stiffness properties. Analytical formulations for the properties of unconnected and three selected X-coupled suspension configurations are derived, and simulation results are obtained to illustrate their relative stiffness and damping properties in the bounce, roll, pitch and warp modes. The superior design flexibility feature of the interconnected hydro-pneumatic suspension is also discussed through sensitivity analysis of a design parameter, namely the annular piston area of the strut. The results demonstrate that a full-vehicle interconnected hydro-pneumatic suspension could provide enhanced roll- and pitch-mode stiffness and damping, while retaining the soft bounce- and warp-mode properties. Such an interconnected suspension thus offers considerable potential in realising enhanced decoupling among the different suspension modes.     

Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2: dynamic response analyses

In the first part of this study, the potential performance benefits of fluidically coupled passive suspensions were demonstrated through analyses of suspension properties, design flexibility and feasibility. In this second part of the study, the dynamic responses of a vehicle equipped with different configurations of fluidically coupled hydro-pneumatic suspension systems are investigated for more comprehensive assessments of the coupled suspension concepts. A generalised 14 degree-of-freedom nonlinear vehicle model is developed and validated to evaluate vehicle ride and handling dynamic responses and suspension anti-roll and anti-pitch characteristics under various road excitations and steering/braking manoeuvres. The dynamic responses of the vehicle model with the coupled suspension are compared with those of the unconnected suspensions to demonstrate the performance potential of the fluidic couplings. The dynamic responses together with the suspension properties suggest that the full-vehicle-coupled hydro-pneumatic suspension could offer considerable potential in realising enhanced ride and handling performance, as well as improved anti-roll and anti-pitch properties in a very flexible and energy-saving manner.     

Analysis and optimization of air suspension system with independent height and stiffness tuning

Suspensions play a crucial role in vehicle comfort and handling. Different types of suspensions have been proposed to address essential comfort and handling requirements of vehicles. The conventional air suspension systems use a single flexible rubber airbag to transfer the chassis load to the wheels. In this type of air suspensions, the chassis height can be controlled by further inflating the airbag; however, the suspension stiffness is not controllable, and it depends on the airbag volume and chassis load. A recent development in a new air suspension includes two air chambers (rubber airbags), allowing independent ride height and stiffness tuning. In this air suspension system, stiffness and ride height of the vehicle can be simultaneously altered for different driving conditions by controlling the air pressure in the two air chambers. This allows the vehicle’s natural frequency and height to be adjusted according to the load and road conditions. This article discusses optimization of an air suspension design with ride height and stiffness tuning. An analytical formulation is developed to yield the optimum design of the new air suspension system. Experimental results verify the mathematical modeling and show the advantages of the new air suspension system.     

Roll and pitch independently tuned interconnected suspension: modelling and dynamic analysis

In this paper, a roll and pitch independently tuned hydraulically interconnected passive suspension is presented. Due to decoupling of vibration modes and the improved lateral and longitudinal stability, the stiffness of individual suspension spring can be reduced for improving ride comfort and road grip. A generalised 14 degree-of-freedom nonlinear vehicle model with anti-roll bars is established to investigate the vehicle ride and handling dynamic responses. The nonlinear fluidic model of the hydraulically interconnected suspension is developed and integrated with the full vehicle model to investigate the anti-roll and anti-pitch characteristics. Time domain analysis of the vehicle model with the proposed suspension is conducted under different road excitations and steering/braking manoeuvres. The dynamic responses are compared with conventional suspensions to demonstrate the potential of enhanced ride and handling performance. The results illustrate the model-decoupling property of the hydraulically interconnected system. The anti-roll and anti-pitch performance could be tuned independently by the interconnected systems. With the improved anti-roll and anti-pitch characteristics, the bounce stiffness and ride damping can be optimised for better ride comfort and tyre grip.     

An investigation into the effect of suspension configurations on the performance of tracked vehicles traversing bump terrains

This is a theoretical investigation into the effect of various suspension configurations on a tracked vehicle performance over bump terrains. The model developed is validated using published experimental data of the modal characteristics of the vehicle. The desired performance is based on ride comfort via the mixed objective function (MOF), which combines the crest factor of bounce acceleration, bounce displacement, angular acceleration, and pitch angle. The optimisation process involves evaluating the MOF for different numbers and locations of dampers and under different rigid bump road conditions and speeds. The system responses of the selected suspension configurations in the time and frequency domains are compared against the undamped suspension. The results show that the suspension configurations have a significant effect on the vehicle mobility over bump road profiles. For a five-road–wheel half model of a tracked vehicle, the maximum number of dampers to use for ride comfort over these road bumps is three with the dampers located at wheel positions 1, 2 and 5. This confirms the current practice for many tracked vehicles with 10 road wheels. However, it is further shown that the suspension fitted with two dampers at the extreme road wheels offer the best performance over various rigid bump terrains.     

Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension

The ride dynamic characteristics of a novel torsio-elastic suspension for off-road vehicle applications are investigated through field measurements and simulations. A prototype suspension was realised and integrated within the rear axle of a forestry skidder for field evaluations. Field measurements were performed on forestry terrains at a constant forward speed of 5 km/h under the loaded and unloaded conditions, and the ride responses were acquired in terms of accelerations along the vertical, lateral, roll, longitudinal and pitch axes. The measurements were also performed on a conventional skidder to investigate the relative ride performance potentials of the proposed suspension. The results revealed that the proposed suspension could yield significant reductions in magnitudes of transmitted vibration to the operator seat. Compared with the unsuspended vehicle, the prototype suspended vehicle resulted in nearly 35%, 43% and 57% reductions in the frequency-weighted rms accelerations along the x-, y- and z-axis, respectively. A 13-degree-of-freedom ride dynamic model of the vehicle with rear-axle torsio-elastic suspension was subsequently derived and validated in order to study the sensitivity of the ride responses to suspension parameters. Optimal suspension parameters were identified using the Pareto technique based on the genetic algorithm to obtain minimal un-weighted and frequency-weighted rms acceleration responses. The optimal solutions resulted in further reduction in the pitch acceleration in the order of 20%, while the reductions in roll and vertical accelerations ranged from 3.5 to 6%.     

Fundamental Issues in Suspension Design for Heavy Road Vehicles

Heavy road vehicles play an important role in the economy of many countries by providing an efficient means of transporting freight. Such vehicles can also have a significant impact on safety, the infrastructure and the environment. The design of the suspension affects the performance of the vehicle in terms of ride, infrastructure damage, suspension working space, energy consumption, rollover stability, yaw stability, braking and traction. The published literature on suspension design for heavy road vehicles is reviewed. It is found that extensive knowledge exists, but that there are areas where improved understanding is needed. Areas identified as fundamental issues requiring attention include ride discomfort criteria, secondary suspensions, and controllable suspensions. Two issues in particular are examined in detail: suspension tuning and suspension configuration. In the tuning of suspension parameter values for vibration performance, numerical optimisation techniques have been used extensively, but generic tuning strategies have not been widely developed. Modal analysis is proposed as a technique for gaining the insight into vehicle vibration behaviour necessary to enable tuning strategies to be devised. As an example, the technique is applied to the pitch-plane vibration of a tractor-semitrailer. In analyses of new suspension configurations or concepts, comparison with alternative concepts is not always made. Lack of such comparisons makes the selection of an optimum concept difficult. Analysis of alternative concepts using simple mathematical models, and comparison of their performance using common criteria, is advocated for enabling informed selection of an optimum. An example involving two alternative roll control systems is used to demonstrate the issue.     

Fundamental Issues in Suspension Design for Heavy Road Vehicles

Heavy road vehicles play an important role in the economy of many countries by providing an efficient means of transporting freight. Such vehicles can also have a significant impact on safety, the infrastructure and the environment. The design of the suspension affects the performance of the vehicle in terms of ride, infrastructure damage, suspension working space, energy consumption, rollover stability, yaw stability, braking and traction. The published literature on suspension design for heavy road vehicles is reviewed. It is found that extensive knowledge exists, but that there are areas where improved understanding is needed. Areas identified as fundamental issues requiring attention include ride discomfort criteria, secondary suspensions, and controllable suspensions. Two issues in particular are examined in detail: suspension tuning and suspension configuration. In the tuning of suspension parameter values for vibration performance, numerical optimisation techniques have been used extensively, but generic tuning strategies have not been widely developed. Modal analysis is proposed as a technique for gaining the insight into vehicle vibration behaviour necessary to enable tuning strategies to be devised. As an example, the technique is applied to the pitch-plane vibration of a tractor-semitrailer. In analyses of new suspension configurations or concepts, comparison with alternative concepts is not always made. Lack of such comparisons makes the selection of an optimum concept difficult. Analysis of alternative concepts using simple mathematical models, and comparison of their performance using common criteria, is advocated for enabling informed selection of an optimum. An example involving two alternative roll control systems is used to demonstrate the issue.     

Improving crosswind stability of fast rail vehicles using active secondary suspension

Rail vehicles are today increasingly equipped with active suspension systems for ride comfort purposes. In this paper, it is studied whether these often powerful systems also can be used to improve crosswind stability. A fast rail vehicle equipped with active secondary suspension for ride comfort purposes is exposed to crosswind loads during curve negotiation. For high crosswind loads, the active secondary suspension is used to reduce the impact of crosswind on the vehicle. The control input is taken from the primary vertical suspension deflection. Three different control cases are studied and compared with the only comfort-oriented active secondary suspension and a passive secondary suspension. The application of active secondary suspension resulted in significantly improved crosswind stability.     

The influence of suspension components friction on race car vertical dynamics

This work analyses the effect of friction in suspension components on a race car vertical dynamics. It is a matter of fact that race cars aim at maximising their performance, focusing the attention mostly on aerodynamics and suspension tuning: suspension vertical and rolling stiffness and damping are parameters to be taken into account for an optimal setup. Furthermore, friction in suspension components must not be ignored. After a test session carried out with a F4 on a Four Poster rig, friction was detected on the front suspension. The real data gathered allow the validation of an analytical model with friction, confirming that its influence is relevant for low frequency values closed to the car pitch natural frequency. Finally, some setup proposals are presented to describe what should be done on actual race cars in order to correct vehicle behaviour when friction occurs.     

工程车辆非线性橡胶悬架动力学建模与优化

以AD250铰接式自卸车的非线性变刚度橡胶悬架为研究对象,应用模态综合法和多柔体系统动力学理论,并通过整车试验建立了整车刚柔耦合动力学模型。以行驶平顺性和操纵稳定性为优化目标,采用序列二次规划法,对不同载荷、不同等级路面和不同车速下的悬架特性参数进行优化,得到了不同工况下的最优悬架特性参数。通过最小二乘法拟合得到了橡胶悬架刚度参数的理想非线性特性曲线。仿真结果表明,优化后的橡胶悬架系统能使车辆保持良好的行驶平顺性。     

Multi-objective optimization of quarter-car models with a passive or semi-active suspension system

A systematic methodology is applied in an effort to select optimum values for the suspension damping and stiffness parameters of two degrees of freedom quarter-car models, subjected to road excitation. First, models involving passive suspension dampers with constant or dual rate characteristics are considered. In addition, models with semi-active suspensions are also examined. Moreover, special emphasis is put in modeling possible temporary separations of the wheel from the ground. For all these models, appropriate methodologies are employed for capturing the motions of the vehicle resulting from passing with a constant horizontal speed over roads involving an isolated or a distributed geometric irregularity. The optimization process is based on three suitable performance criteria, related to ride comfort, suspension travel and road holding of the vehicle and yielding the most important suspension stiffness and damping parameters. As these criteria are conflicting, a suitable multi-objective optimization methodology is set up and applied. As a result, a series of diagrams with typical numerical results are presented and compared in both the corresponding objective spaces (in the form of classical Pareto fronts) and parameter spaces.     

Multi-objective optimization of quarter-car models with a passive or semi-active suspension system

A systematic methodology is applied in an effort to select optimum values for the suspension damping and stiffness parameters of two degrees of freedom quarter-car models, subjected to road excitation. First, models involving passive suspension dampers with constant or dual rate characteristics are considered. In addition, models with semi-active suspensions are also examined. Moreover, special emphasis is put in modeling possible temporary separations of the wheel from the ground. For all these models, appropriate methodologies are employed for capturing the motions of the vehicle resulting from passing with a constant horizontal speed over roads involving an isolated or a distributed geometric irregularity. The optimization process is based on three suitable performance criteria, related to ride comfort, suspension travel and road holding of the vehicle and yielding the most important suspension stiffness and damping parameters. As these criteria are conflicting, a suitable multi-objective optimization methodology is set up and applied. As a result, a series of diagrams with typical numerical results are presented and compared in both the corresponding objective spaces (in the form of classical Pareto fronts) and parameter spaces.     

汽车转向与悬架系统的集成控制研究

在建立了汽车转向与悬架系统的综合模型的基础上,运用一种具有扩展的调节器结构LQG控制方法,设计了 主动悬架控制器,实现对车身横摆角速度、车身垂直加速度、车身侧倾角和俯仰角的集成控制,从而显著提高汽车的 平顺性、操纵稳定性和安全性。     

Using the lead vehicle as preview sensor in convoy vehicle active suspension control

Both ride quality and roadholding of actively suspended vehicles can be improved by sensing the road ahead of the vehicle and using this information in a preview controller. Previous applications have used look-ahead sensors mounted on the front bumper to measure terrain beneath. Such sensors are vulnerable, potentially confused by water, snow, or other soft obstacles and offer a fixed preview time. For convoy vehicle applications, this paper proposes using the overall response of the preceding vehicle(s) to generate preview controller information for follower vehicles. A robust observer is used to estimate the states of a quarter-car vehicle model, from which road profile is estimated and passed on to the follower vehicle(s) to generate a preview function. The preview-active suspension, implemented in discrete time using a shift register approach to improve simulation time, reduces sprung mass acceleration and dynamic tyre deflection peaks by more than 50% and 40%, respectively. Terrain can change from one vehicle to the next if a loose obstacle is dislodged, or if the vehicle paths are sufficiently different so that one vehicle misses a discrete road event. The resulting spurious preview information can give suspension performance worse than that of a passive or conventional active system. In this paper, each vehicle can effectively estimate the road profile based on its own state trajectory. By comparing its own road estimate with the preview information, preview errors can be detected and suspension control quickly switched from preview to conventional active control to preserve performance improvements compared to passive suspensions.     

State of the art survey: active and semi-active suspension control

This survey paper aims to provide some insight into the design of suspension control system within the context of existing literature and share observations on current hardware implementation of active and semi-active suspension systems. It reviews the performance envelop of active, semi-active, and passive suspensions with a focus on linear quadratic-based optimisation including a specific example. The paper further discusses various design aspects including other design techniques, the decoupling of load and road disturbances, the decoupling of pitch and heave modes, the use of an inerter as an additional design element, and the application of preview. Various production and near production suspension systems were examined and described according to the features they offer, including self-levelling, variable damping, variable geometry, and anti-roll damping and stiffness. The lessons learned from these analytical insights and related hardware implementations are valuable and can be applied towards future active or semi-active suspension design.     

Multi-performance analyses and design optimisation of hydro-pneumatic suspension system for an articulated frame-steered vehicle

This study investigates the coupled ride and directional performance characteristics of an articulated frame-steered vehicle (AFSV). A three-dimensional multi-body dynamic model of the vehicle is formulated integrating the hydro-mechanical frame steering and hydro-pneumatic suspension (HPS) systems. The model parameters are obtained from field-measured data acquired for an unsuspended AFSV prototype and a validated scaled HPS model. The HPS is implemented only at the front axle, which supports the driver cabin. The main parameters of the HPS, including the piston area, and flow areas of bleed orifices and check valves, are selected through design sensitivity analyses and optimisation, considering ride vibration, and roll- and yaw-plane stability performance measures. These include the frequency-weighted vertical vibration of the front unit, root-mean-square lateral acceleration during the sustained lateral load transfer ratio period prior to absolute rollover of the rear unit, and yaw-mode oscillation frequency following a lateral perturbation of the vehicle. The results suggested that the implementation of the HPS to the front unit alone could help preserve the directional stability limits compared to the unsuspended prototype vehicle and reduce the ride vibration exposure by nearly 30%. The results of sensitivity analyses revealed that the directional stability performance limits are only slightly affected by the HPS parameters. Further reduction in the ride vibration exposure was attained with the optimal design, irrespective of the payload variations. The vehicle operation at relatively higher speeds, however, would yield greater vibration exposure.     

Wear/comfort Pareto optimisation of bogie suspension

Pareto optimisation of bogie suspension components is considered for a 50 degrees of freedom railway vehicle model to reduce wheel/rail contact wear and improve passenger ride comfort. Several operational scenarios including tracks with different curve radii ranging from very small radii up to straight tracks are considered for the analysis. In each case, the maximum admissible speed is applied to the vehicle. Design parameters are categorised into two levels and the wear/comfort Pareto optimisation is accordingly accomplished in a multistep manner to improve the computational efficiency. The genetic algorithm (GA) is employed to perform the multi-objective optimisation. Two suspension system configurations are considered, a symmetric and an asymmetric in which the primary or secondary suspension elements on the right- and left-hand sides of the vehicle are not the same. It is shown that the vehicle performance on curves can be significantly improved using the asymmetric suspension configuration. The Pareto-optimised values of the design parameters achieved here guarantee wear reduction and comfort improvement for railway vehicles and can also be utilised in developing the reference vehicle models for design of bogie active suspension systems.     

重型商用车驾驶室悬置结构对平顺性影响的试验研究

以某重型商用车驾驶室悬置系统为例,通过实车道路试验,研究了四弹簧,四气囊悬置减振系统的振动特性在A级路面和B级路面对车辆行驶平顺性的影响规律。试验结果表明,四气囊驾驶室悬置系统的平顺性整体优于四弹簧驾驶室悬置结构。