共查询到19条相似文献,搜索用时 156 毫秒
1.
为提高城市循环工况下客车的燃油经济性,开展了一种新型混联式混合动力客车匹配控制策略研究。根据该混联系统的结构特点,制定了串联与并联模式间的切换条件及控制规则,通过确定电池等效燃油模型,以各时刻下客车燃油消耗率最小为优化目标,对电池和发动机功率进行实时优化控制。研究结果表明:电池荷电状态在预定的区域内保持平衡,发动机运行工作点处于高效区域内,且整车燃油经济性相对原型客车提高了32.41%,与采用规则控制策略相比提高了13.2%。 相似文献
2.
混合动力的动力耦合及控制策略 总被引:1,自引:0,他引:1
结合城市公交车的实际工况,并对目前混联式混合动力进行分析,提出混联式混合电动客车动力总成及布置图,最后提出了混联式混合动力的工作模式。 相似文献
3.
主要阐述zjC6120CHEV混联式混合动力城市客车的控制策略,发动机、变速器等的合理匹配,使整车的动力性和经济性得以提高。 相似文献
4.
基于双离合器式的混联式混合动力客车 总被引:2,自引:0,他引:2
结合城市公交车的实际工况,通过对目前混联式混合动力的分析,提出双离合器式的混联式混合电动客车动力总成及其布置型式,并分析了这种布置型式的优点,最后研究了其混合动力控制系统,讨论了其工作模式。 相似文献
5.
6.
7.
混联式混合动力汽车控制策略开发与仿真研究 总被引:4,自引:0,他引:4
阐述了切换式混联混合动力汽车系统特点和控制模式。对该种混合动力汽车起步工况、正常行驶工况、减速工况和故障工况等工作模式进行了分析。利用PSAT软件建立了仿真模型,对整车性能仿真分析。通过与串联式ZK6108HGD混合动力客车进行对比,验证了仿真模型的准确性。 相似文献
8.
9.
10.
对串联式、并联式和混联式三种典型的混合动力系统的结构进行研究;在此基础上,对三种混合动力系统的工作模式进行分析和比较。 相似文献
11.
Yuanchun Cai Minggao Ouyang Fuyuan Yang 《International Journal of Automotive Technology》2017,18(3):473-487
Series-parallel PHEV city buses combine the advantages of series and parallel configurations and have been used in China. However, the design and energy management of series-parallel PHEV city buses based on Chinese driving conditions still need to be investigated. In this paper, an equivalent consumption minimization strategy is provided to optimize energy management for series-parallel PHEV city buses, and the process of the equivalent consumption minimization strategy for series-parallel is presented in this paper. Compared with the validated rule-based energy control strategy, ECMS shows a fuel economy improvement of 8.2 % in the CBCD (Chinese Bus Driving Cycle). Based on the optimal energy management, a design for a generator motor in the series-parallel configuration has been processed. The fuel consumption has been shown to decrease, with an increase in generator power, because the system with the higher generator power can work at a higher efficiency in the series mode and operate the engine in the high efficiency area in the parallel mode. Besides, in terms of costof- ownership for a PHEV bus for lifetime of 8 years, although the high generator power will lead to high purchase cost for series-parallel PHEV bus, a series-parallel PHEV city bus with a generator of 100 kW maximum power will still show small advantage in cost-of-ownership, based on current motor price and natural gas price. 相似文献
12.
针对纯电动客车,串联、并联、混联混合动力客车技术的现状,分析了新能源客车发展趋势,指出了新能源客车发展重点。 相似文献
13.
本文介绍一种使用大电流固态开关转换单体串并联连接的充电电路,在电池组放电时各单体处于串联状态。需要充电时,各单体即转换为并联状态,接入单路充电机即可保证全部单体处于相同电压下,杜绝了衰减单体过充的可能。 相似文献
14.
福特公司自主开发的混合动力系统 早在5年前,福特就着手开发由汽油机+电机的混合动力系统,这一次福特推出Fusion混合动力车时,其中混合动力系统就是福特公司自主开发的. 相似文献
15.
为实现双电机混联构型混合动力车辆(HEV)的串并联切换控制,通过对双电机混联构型进行串并联驱动模式分析,提出一种通过三动力源协调控制的无动力中断切换方法。将串联到并联切换过程分为发动机工作点转移、离合器结合、动力源切换3个阶段,将并联到串联行驶切换过程划分为动力源切换、离合器打开、发动机工作点转移3个阶段,并通过仿真分析和实车测试对控制方法进行了验证。结果表明:在时速80 km/h进行串联到并联切换时,切换过程历时1.76 s,切换冲击度小于10 m/s3,相同时速进行并联到串联切换时,切换过程历时2.57 s,切换冲击度小于5 m/s3,整个切换过程,均没有出现动力中断现象。因此,本控制方法,能够顺利地完成串并联切换控制。 相似文献
16.
17.
Dietrich R. Bergmann 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1973,2(3):139-154
Vehicle dwell times are perhaps the most unpredictable parameters of station operations because of occasional passenger intervention. This paper reports on an investigation involving theoretical and Monte Carlo techniques to ascertain the sensitivity of station throughput to randomness in dwell times. Alternative configurations of vehicle loading positions, e.g., loading positions in parallel, in series, or in a series-parallel combination, are considered in an effort to rank the configurations by their associated performance levels. 相似文献
18.
分析简单混联式混合动力客车动力系统的结构;基于混合动态系统理论制定能量管理策略,并且通过仿真将该方案与原车进行比较.仿真结果表明,采用该方案的车辆动力性有所改善,燃油经济性有显著提高. 相似文献
19.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(3):139-154
SUMMARY Vehicle dwell times are perhaps the most unpredictable parameters of station operations because of occasional passenger intervention. This paper reports on an investigation involving theoretical and Monte Carlo techniques to ascertain the sensitivity of station throughput to randomness in dwell times. Alternative configurations of vehicle loading positions, e.g., loading positions in parallel, in series, or in a series-parallel combination, are considered in an effort to rank the configurations by their associated performance levels. 相似文献