Fuel cycle emissions and life cycle costs of alternative fuel vehicle policy options for the City of Houston municipal fleet

Municipal fleet vehicle purchase decisions provide a direct opportunity for cities to reduce emissions of greenhouse gases (GHG) and air pollutants. However, cities typically lack comprehensive data on total life cycle impacts of various conventional and alternative fueled vehicles (AFV) considered for fleet purchase. The City of Houston, Texas, has been a leader in incorporating hybrid electric (HEV), plug-in hybrid electric (PHEV), and battery electric (BEV) vehicles into its fleet, but has yet to adopt any natural gas-powered light-duty vehicles. The City is considering additional AFV purchases but lacks systematic analysis of emissions and costs. Using City of Houston data, we calculate total fuel cycle GHG and air pollutant emissions of additional conventional gasoline vehicles, HEVs, PHEVs, BEVs, and compressed natural gas (CNG) vehicles to the City's fleet. Analyses are conducted with the Greenhouse Gases, Regulated Emissions, and Energy use in Transportation (GREET) model. Levelized cost per kilometer is calculated for each vehicle option, incorporating initial purchase price minus residual value, plus fuel and maintenance costs. Results show that HEVs can achieve 36% lower GHG emissions with a levelized cost nearly equal to a conventional sedan. BEVs and PHEVs provide further emissions reductions, but at levelized costs 32% and 50% higher than HEVs, respectively. CNG sedans and trucks provide 11% emissions reductions, but at 25% and 63% higher levelized costs, respectively. While the results presented here are specific to conditions and vehicle options currently faced by one city, the methods deployed here are broadly applicable to informing fleet purchase decisions.     

Greenhouse gas emission benefits of vehicle lightweighting: Monte Carlo probabalistic analysis of the multi material lightweight vehicle glider

Vehicle lightweighting reduces fuel cycle greenhouse gas (GHG) emissions but may increase vehicle cycle (production) GHG emissions because of the GHG intensity of lightweight material production. Life cycle GHG emissions are estimated and sensitivity and Monte Carlo analyses conducted to systematically examine the variables that affect the impact of lightweighting on life cycle GHG emissions. The study uses two real world gliders (vehicles without powertrain or battery) to provide a realistic basis for the analysis. The conventional and lightweight gliders are based on the Ford Fusion and Multi Material Lightweight Vehicle, respectively. These gliders were modelled with internal combustion engine vehicle (ICEV), hybrid electric vehicle (HEV), and battery electric vehicle (BEV) powertrains. The probability that using the lightweight glider in place of the conventional (steel-intensive) glider reduces life cycle GHG emissions are: ICEV, 100%; HEV, 100%, and BEV, 74%.The extent to which life cycle GHG emissions are reduced depends on the powertrain, which affects fuel cycle GHG emissions. Lightweighting an ICEV results in greater base case GHG emissions mitigation (10 t CO₂eq.) than lightweighting a more efficient HEV (6 t CO₂eq.). BEV lightweighting can result in higher or lower GHG mitigation than gasoline vehicles, depending largely on the source of electricity.     

Life cycle model of alternative fuel vehicles: emissions,energy, and cost trade-offs

This paper describes a life cycle model for performing level-playing field comparisons of the emissions, costs, and energy efficiency trade-offs of alternative fuel vehicles (AFV) through the fuel production chain and over a vehicle lifetime. The model is an improvement over previous models because it includes the full life cycle of the fuels and vehicles, free of the distorting effects of taxes or differential incentives. This spreadsheet model permits rapid analyses of scenarios in plots of trade-off curves or efficiency frontiers, for a wide range of alternatives with current and future prices and levels of technology. The model is available on request.The analyses indicate that reformulated gasoline (RFG) currently has the best overall performance for its low cost, and should be the priority alternative fuel for polluted regions. Liquid fuels based on natural gas, M100 or M85, may be the next option by providing good overall performance at low cost and easy compatibility with mainstream fuel distribution systems. Longer term, electric drive vehicles using liquid hydrocarbons in fuel cells may offer large emissions and energy savings at a competitive cost. Natural gas and battery electric vehicles may prove economically feasible at reducing emissions and petroleum consumption in niches determined by the unique characteristics of those systems.     

The effect of uncertainty on US transport-related GHG emissions and fuel consumption out to 2050

The future of US transport energy requirements and emissions is uncertain. Transport policy research has explored a number of scenarios to better understand the future characteristics of US light-duty vehicles. Deterministic scenario analysis is, however, unable to identify the impact of uncertainty on the future US vehicle fleet emissions and energy use. Variables determining the future fleet emissions and fuel use are inherently uncertain and thus the shortfall in understanding the impact of uncertainty on the future of US transport needs to be addressed. This paper uses a stochastic technology and fleet assessment model to quantify the uncertainties in US vehicle fleet emissions and fuel use for a realistic yet ambitious pathway which results in about a 50% reduction in fleet GHG emissions in 2050. The results show the probability distribution of fleet emissions, fuel use, and energy consumption over time out to 2050. The expected value for the fleet fuel consumption is about 450 and 350 billion litres of gasoline equivalent with standard deviations of 40 and 80 in 2030 and 2050, respectively. The expected value for the fleet GHG emissions is about 1360 and 850 Mt CO₂ equivalent with standard deviation of 130 and 230 in 2030 and 2050 respectively. The parameters that are major contributors to variations in emissions and fuel consumption are also identified and ranked through the uncertainty analysis. It is further shown that these major contributors change over time, and include parameters such as: vehicle scrappage rate, annual growth of vehicle kilometres travelled in the near term, total vehicle sales, fuel economy of the dominant naturally-aspirated spark ignition vehicles, and percentage of gasoline displaced by cellulosic ethanol. The findings in this paper demonstrate the importance of taking uncertainties into consideration when choosing amongst alternative fuel and emissions reduction pathways, in the light of their possible consequences.     

A technical analysis of model year 2011 US automobile efficiency

This paper investigates the new 2011 automobile fleet to quantify the variation in models’ efficiency and underlying technology attributes. This involves analysis of test data to quantify the aerodynamic, rolling resistance, and powertrain efficiency characteristics of each model, as well as analysis to understand relationships between these and vehicle fuel consumption. The findings indicate that while vehicles are about 14% efficient on average, there is wide variation and direct evidence of dramatically improved powertrain efficiency within existing models. Existing gasoline and diesel models demonstrate improved powertrain efficiency by over 25%, hybrid gasoline-electric powertrains by over 50%, fuel cells by a factor of three, and all-electric by a factor of four as compared to the average 2011 vehicle. Advanced aerodynamic and tire rolling resistance technologies are also in evidence.     

Eco-driver training within the City of Calgary’s municipal fleet: Monitoring the impact

This article highlights eco-driving as an available policy option to reduce climate altering GHG emissions. Recognizing the need to reduce the environmental impact of its fleet operations, the City of Calgary is a leader in developing programs and policies that aim to reduce GHG emissions and associated pollutants resulting from the use of fossil fuels. Among local action taken against climate change, the City sought to quantify CO₂ emissions reductions from their municipal fleet as a result of eco-driver training, with a specific focus on engine idling. Fifteen drivers from the Development & Building Approvals Business Unit had in-vehicle monitoring technology (CarChips®) installed into their vehicles as part of a three-phase research process. The results show that gasoline and hybrid vehicles decreased average idling between 4% and 10% per vehicle per day, leading to an average emissions decrease of 1.7 kg of CO₂ per vehicle per day.     

A comparison of technologies for carbon-neutral passenger transport

In this study, the use of energy carriers based on renewable energy sources in battery-powered electric vehicles (BPEVs), fuel-cell electric vehicles (FCEVs), hybrid electric vehicles (HEVs) and internal combustion engine vehicles (ICEVs) is compared regarding energy efficiency, emission and cost. There is the potential to double the primary energy compared with the current level by utilising vehicles with electric drivetrains. There is also major potential to increase the efficiency of conventional ICEVs. The energy and environmental cost of using a passenger car can be reduced by 50% solely by using improved ICEVs instead of ICEVs with current technical standard. All the studied vehicles with alternative powertrains (HEVs, FCEVs, and BPEVs) would have lower energy and environmental costs than the ICEV. The HEVs, FCEVs and BPEVs have, however, higher costs than the future methanol-fuelled ICEV, if the vehicle cost is added to the energy and environmental costs, even if significant cost reductions for key technologies such as fuel cells, batteries and fuel storages are assumed. The high-energy efficiency and low emissions of these vehicles cannot compensate for the high vehicle cost. The study indicates, however, that energy-efficiency improvements, combined with the use of renewable energy, would reduce the cost of CO₂ reduction by 40% compared with a strategy based on fuel substitution only.     

Market introduction strategies for alternative powertrains in long-range passenger cars under competition

Alternative powertrains are considered as a promising option to significantly reduce CO₂ emissions from passenger cars. One major prerequisite is their successful market introduction. In this paper, we present a system dynamics model that allows for the evaluation of strategies for the market introduction of alternative powertrain technologies in long-range passenger cars (⩾400 km) under competition. The model considers two competing manufacturers, one first-mover and one follower, each introducing plug-in hybrids and fuel cell electric vehicles according to exogenously defined strategies, which comprise timing, pricing, and technology parameters. The manufacturers can learn from each other due to technology spillover, leading to cost reductions of the powertrains. We use an exemplary dataset for the German car market to study the manufacturers’ influence on the market success of alternative powertrains as well as the underlying mechanisms. The results indicate that in general more competition leads to higher market shares of alternatively powered vehicles and thus allows for a higher reduction of emissions. However, this might cause decreasing profits for both manufacturers, especially if the follower pursues an aggressive pricing strategy when entering the market to gain market shares from its competitor. Also, technology spillover has a positive effect on the market penetration. This particularly holds true for a low level of technology experience where high cost reductions can be achieved and for fuel cell electric vehicles where the costs of the powertrain are much higher compared to plug-in hybrids.     

Economic costs and environmental impacts of alternative fuel vehicle fleets in local government: An interim assessment of a voluntary ten-year fleet conversion plan

Vehicle fleets are widely viewed by policy makers as attractive first markets for introduction of alternative fuel technologies. Although, it is essential to understand the environmental benefits and economic challenges involved in fleet conversion, the literature provides little understanding of the implementation issues associated with alternative fuel vehicles. This paper examines the cost effectiveness and environmental impact of the conversion of a 180 plus vehicle fleet to alternative fuel vehicle technologies by a public organization at the mid-point of the project implementation. Using multi-year micro data on fuel usage, operational and capital expenditures, mileage and emissions, the paper examines conversion costs and infrastructure investments required, extent of user adoption, and emissions reductions achieved. Results are discussed in terms of their implications for managerial practice in local government fleet agencies and for future research.     

Lead demand of future vehicle technologies

Changes in battery technology for hybrid or fuel cell vehicles will have significant impacts on US lead flows. Hybrid vehicles contain lead–acid batteries as auxiliary power sources although these lead–acid batteries may be replaced in the future. Given the importance of lead–acid battery recycling to US lead flows, changes in battery-related lead demand could alter the domestic production of lead and affect lead releases to the environment, particularly to air and land. We investigate lead demand for various prospective changes in the US automotive fleet. These include the complete replacement of lead–acid batteries from vehicles (such as next-generation hybrid electric vehicles or use of alternative batteries) or the introduction of micro-hybrid vehicles (lead battery pack vehicles). A dynamic model is described and used to examine the immediate and long-term lead flow patterns, and the associated lead emissions. We conclude that the adoption of non-lead–acid hybrid vehicles does not result in the lead market collapsing unless there is rapid introduction of these vehicles to the fleet, 50% by 2007. A 10% increase in micro-hybrid (battery pack) vehicles results in a predicted increase of 26 tons of lead emissions over the status quo or a 6% increase over 2004 Toxics Release Inventory releases from mining, primary smelting, and secondary smelting.     

Fuel economy,cost, and greenhouse gas results for alternative fuel vehicles in 2011

This paper presents in-service data collected from over 300 alternative fuel vehicles and over 80 fueling stations to help fleets determine what types of applications and alternative fuels may help them reduce their environmental impacts and fuel costs. The data were compiled in 2011 by over 30 organizations in New York State using a wide variety of commercial vehicle types and technologies. Fuel economy, incremental vehicle purchase cost, fueling station purchase cost, greenhouse gas reductions, and fuel cost savings data clarifies the performance of alternative fuel vehicles and fuel stations. Data were collected from a range of vehicle types, including school buses, delivery trucks, utility vans, street sweepers, snow plows, street pavers, bucket trucks, paratransit vans, and sedans. CNG, hybrid, LPG, and electric vehicles were tracked.     

Effects of battery chemistry and performance on the life cycle greenhouse gas intensity of electric mobility

Lithium traction batteries are a key enabling technology for plug-in electric vehicles (PEVs). Traction battery manufacture contributes to vehicle production emissions, and battery performance can have significant effects on life cycle greenhouse gas (GHG) emissions for PEVs. To assess emissions from PEVs, a life cycle perspective that accounts for vehicle production and operation is needed. However, the contribution of batteries to life cycle emissions hinge on a number of factors that are largely absent from previous analyses, notably the interaction of battery chemistry alternatives and the number of electric vehicle kilometers of travel (e-VKT) delivered by a battery. We compare life cycle GHG emissions from lithium-based traction batteries for vehicles using a probabilistic approach based on 24 hypothetical vehicles modeled on the current US market. We simulate life-cycle emissions for five commercial lithium chemistries. Examining these chemistries leads to estimates of emissions from battery production of 194–494 kg CO₂ equivalent (CO₂e) per kWh of battery capacity. Combined battery production and fuel cycle emissions intensity for plug-in hybrid electric vehicles is 226–386 g CO₂e/e-VKT, and for all-electric vehicles 148–254 g CO₂e/e-VKT. This compares to emissions for vehicle operation alone of 140–244 g CO₂e/e-VKT for grid-charged electric vehicles. Emissions estimates are highly dependent on the emissions intensity of the operating grid, but other upstream factors including material production emissions, and operating conditions including battery cycle life and climate, also affect life cycle GHG performance. Overall, we find battery production is 5–15% of vehicle operation GHG emissions on an e-VKT basis.     

Projecting adoption of truck powertrain technologies and CO2 emissions in line-haul networks

In this paper we present a mixed-integer linear program to represent the decision-making process for heterogeneous fleets selecting vehicles and allocating them on freight delivery routes to minimize total cost of ownership. This formulation is implemented to project alternative powertrain technology adoption and utilization trends for a set of line-haul fleets operating on a regional network. Alternative powertrain technologies include compressed (CNG) and liquefied natural gas (LNG) engines, hybrid electric diesel, battery electric (BE), and hydrogen fuel cell (HFC). Future policies, economic factors, and availability of fueling and charging infrastructure are input assumptions to the proposed modeling framework. Powertrain technology adoption, vehicle utilization, and resulting CO₂ emissions predictions for a hypothetical, representative regional highway network are illustrated. A design of experiments (DOE) is used to quantify sensitivity of adoption outcomes to variation in vehicle performance parameters, fuel costs, economic incentives, and fueling and charging infrastructure considerations. Three mixed-adoption scenarios, including BE, HFC, and CNG vehicle market penetration, are identified by the DOE study that demonstrate the potential to reduce cumulative CO₂ emissions by more than 25% throughout the period of study.     

Environmental life-cycle assessment of transit buses with alternative fuel technology

The paper presents a life-cycle assessment of costs and greenhouse gas emissions for transit buses deploying a hybrid input-output model to compare ultra-low sulfur diesel to hybrid diesel-electric, compressed natural gas, and hydrogen fuel-cell. We estimate the costs of emissions reductions from alternative fuel vehicles over the life cycle and examine the sensitivity of the results to changes in fuel prices, passenger demand, and to technological characteristics influencing performance and emissions. We find that the alternative fuel buses reduce operating costs and emissions, but increase life-cycle costs. The infrastructure requirement to deploy and operate alternative fuel buses is critical in the comparison of life-cycle emissions. Additionally, efficient bus choice is sensitive to passenger demand, but only moderately sensitive to technological characteristics, and that the relative efficiency of compressed natural gas buses is more sensitive to changes in fuel prices than that of the other bus types.     

Strategies to achieve deep reductions in metropolitan transportation GHG emissions: the case of Philadelphia

ABSTRACT

This paper investigates strategies that could achieve an 80% reduction in transportation emissions from current levels by 2050 in the City of Philadelphia. The baseline daily lifecycle emissions generated by road transportation in the Greater Philadelphia Region in 2012 were quantified using trip information from the 2012 Household Travel Survey (HTS). Emissions were projected to the year 2050 accounting for population growth and trends in vehicle technology for both the Greater Philadelphia Region and the City of Philadelphia. The impacts of vehicle technology and shifts in travel modes on greenhouse gas (GHG) emissions in 2050 were quantified using a scenario approach. The analysis of 12 different scenarios suggests that 80% reduction in emissions is technically feasible through a combination of active transportation, cleaner fuels for public transit vehicles, and a significant market penetration of battery-electric vehicles. The additional electricity demand associated with greater use of electric vehicles could amount to 10.8 TWh/year. The use of plug-in hybrid electric vehicles (PHEV) shows promising results due to high reductions in GHG emissions at a potentially manageable cost.     

Life cycle emissions and cost model for urban light duty vehicles

The growth of vehicle sales and use internationally requires the consumption of significant quantities of energy and materials, and contributes to the deterioration of air-quality and climate conditions. Advanced propulsion systems and electric drive vehicles have substantially different characteristics and impacts. They require life cycle assessments and detailed comparisons with gasoline powered vehicles which, in turn, should lead to critical updates of traditional models and assumptions. For a comprehensive comparison of advanced and traditional light duty vehicles, a model is developed that integrates external costs, including emissions and time losses, with societal and consumer life cycle costs. Life cycle emissions and time losses are converted into costs for seven urban light duty vehicles. The results, which are based on vehicle technology characteristics and transportation impacts on environment, facilitate vehicle comparisons and support policy making in transportation. Substantially, more sustainable urban transportation can be achieved in the short-term by promoting policies that increase vehicle occupancy; in the intermediate-term by increasing the share of hybrid vehicles in the car market and in the long-term by the widespread use of electric vehicles. A sensitivity-analysis of life cost results revealed that vehicle costs change significantly for different geographical areas depending on vehicle taxation, pricing of gasoline, electric power and pollution. Current practices in carbon and air quality pricing favor oil and coal based technologies. However, increasing the cost of electricity from coal and other fossil fuels would increase the variable cost for electric vehicles, and tend to favor the variable cost of hybrid vehicles.     

Conventional,hybrid and electric vehicles for Australian driving conditions. Part 2: Life cycle CO2-e emissions

This paper is the second of a two part study which quantifies the economic and greenhouse performance of conventional, hybrid and fully electric passenger vehicles operating in Australian driving conditions. This second study focuses on the life cycle greenhouse gas emissions. Two vehicle sizes are considered, Class-B and Class-E, which bracket the large majority of passenger vehicles on Australian roads.Using vehicle simulation models developed in the first study, the trade-offs between the ability of increasingly electric powertrains in curtailing the tailpipe emissions and the corresponding rise in the embedded vehicle emissions have been evaluated. The sensitivity of the life cycle emissions to fuel, electricity and the change in the energy mix are all considered. In conjunction with the total cost of ownership calculated in the companion paper, this allows the cost of mitigating life cycle greenhouse gas emissions through electrification of passenger transport to be estimated under different scenarios. For Class-B vehicles, fully electric vehicles were found to have a higher total cost of ownership and higher life cycle emissions than an equivalent vehicle with an internal combustion engine. For Class-E vehicles, hybrids are found to be the most cost effective whilst also having lowest life cycle emissions under current conditions. Further, hybrid vehicles also exhibit little sensitivity in terms of greenhouse emissions and cost with large changes in system inputs.     

Motor fuel choice: An econometric analysis

Concerns about air pollution and energy security have stimulated interest in alternative automotive fuels and in vehicles that can use multiple fuels and combinations of fuels. Consumer behavior in the choice of motor fuel for flexible-fuel vehicles is likely to be a key factor in the creation and stability of markets for new fuels. The sensitivity of fuel choice to fuel prices is investigated here using data on purchases of regular, premium, leaded, and unleaded grades of gasoline. Multinomial logit choice models are estimated for the years 1982, 1983, and 1984. Consumer choices are found to be highly elastic with respect to fuel prices. New fuels will have to be priced within a few cents of existing fuels to capture significant market shares. Consumers also exhibit strong preferences for the fuel type specified by law (unleaded vs. leaded) for their vehicles. Thus, legal restrictions could play an important role in stabilizing alternative fuels markets. The typical consumer is willing to pay 5–10 cents more per gallon for premium grade gasoline. The premium for premium has been increasing as increasing numbers of turbocharged and fuel-injected engines join the fleet, reflecting the fact that consumers are willing to pay more for a fuel if they believe their engines require it.     

Congestion and emissions mitigation: A comparison of capacity,demand, and vehicle based strategies

Capacity, demand, and vehicle based emissions reduction strategies are compared for several pollutants employing aggregate US congestion and vehicle fleet condition data. We find that congestion mitigation does not inevitably lead to reduced emissions; the net effect of mitigation depends on the balance of induced travel demand and increased vehicle efficiency that in turn depend on the pollutant, congestion level, and fleet composition. In the long run, capacity-based congestion improvements within certain speed intervals can reasonably be expected to increase emissions of CO₂e, CO, and NO_x through increased vehicle travel volume. Better opportunities for emissions reductions exist for HC and PM_2.5 emissions, and on more heavily congested arterials. Advanced-efficiency vehicles with emissions rates that are less sensitive to congestion than conventional vehicles generate less emissions co-benefits from congestion mitigation.     

Assessing methods for comparing emissions from gasoline and diesel light-duty vehicles based on microscale measurements

This paper assess whether a real-world second-by-second methodology that integrates vehicle activity and emissions rates for light-duty gasoline vehicles can be extended to diesel vehicles. Secondly it compares fuel use and emission rates between gasoline and diesel light-duty vehicles. To evaluate the methodology, real-world field data from two light-duty diesel vehicles are used. Vehicle specific power, a function of vehicle speed, acceleration, and road grade, is evaluated with respect to ability to explain variation in emissions rates. Vehicle specific power has been used previously to define activity-based modes and to quantify variation in fuel use and emission rates of gasoline vehicles taking into account idle, acceleration, cruise, and deceleration. The fuel use and emission rates for light-duty diesel vehicles can also be explained using vehicle specific power -based modes. Thus, the methodology enables direct comparisons for different vehicle fuels and technologies. Furthermore, the method can be used to estimate average fuel use and emission rates for a wide variety of driving cycles.