Well-to-wheel costs,primary energy demand,and greenhouse gas emissions for the production and operation of conventional and alternative vehicles

This study provides a comprehensive comparison of well-to-wheel (WTW) energy demand, WTW GHG emissions, and costs for conventional ICE and alternative passenger car powertrains, including full electric, hybrid, and fuel cell powertrains. Vehicle production, operation, maintenance, and disposal are considered, along with a range of hydrogen production processes, electricity mixes, ICE fuels, and battery types. Results are determined based on a reference vehicle, powertrain efficiencies, life cycle inventory data, and cost estimations. Powertrain performance is measured against a gasoline ICE vehicle. Energy carrier and battery production are found to be the largest contributors to WTW energy demand, GHG emissions, and costs; however, electric powertrain performance is highly sensitive to battery specific energy. ICE and full hybrid vehicles using alternative fuels to gasoline, and fuel cell vehicles using natural gas hydrogen production pathways, are the only powertrains which demonstrate reductions in all three evaluation categories simultaneously (i.e., WTW energy demand, emissions, and costs). Overall, however, WTW emission reductions depend more on the energy carrier production pathway than on the powertrain; hence, alternative energy carriers to gasoline for an ICE-based fleet (including hybrids) should be emphasized from a policy perspective in the short-term. This will ease the transition towards a low-emission fleet in Switzerland.     

Conventional,hybrid and electric vehicles for Australian driving conditions. Part 2: Life cycle CO2-e emissions

This paper is the second of a two part study which quantifies the economic and greenhouse performance of conventional, hybrid and fully electric passenger vehicles operating in Australian driving conditions. This second study focuses on the life cycle greenhouse gas emissions. Two vehicle sizes are considered, Class-B and Class-E, which bracket the large majority of passenger vehicles on Australian roads.Using vehicle simulation models developed in the first study, the trade-offs between the ability of increasingly electric powertrains in curtailing the tailpipe emissions and the corresponding rise in the embedded vehicle emissions have been evaluated. The sensitivity of the life cycle emissions to fuel, electricity and the change in the energy mix are all considered. In conjunction with the total cost of ownership calculated in the companion paper, this allows the cost of mitigating life cycle greenhouse gas emissions through electrification of passenger transport to be estimated under different scenarios. For Class-B vehicles, fully electric vehicles were found to have a higher total cost of ownership and higher life cycle emissions than an equivalent vehicle with an internal combustion engine. For Class-E vehicles, hybrids are found to be the most cost effective whilst also having lowest life cycle emissions under current conditions. Further, hybrid vehicles also exhibit little sensitivity in terms of greenhouse emissions and cost with large changes in system inputs.     

Greenhouse gas emission benefits of vehicle lightweighting: Monte Carlo probabalistic analysis of the multi material lightweight vehicle glider

Vehicle lightweighting reduces fuel cycle greenhouse gas (GHG) emissions but may increase vehicle cycle (production) GHG emissions because of the GHG intensity of lightweight material production. Life cycle GHG emissions are estimated and sensitivity and Monte Carlo analyses conducted to systematically examine the variables that affect the impact of lightweighting on life cycle GHG emissions. The study uses two real world gliders (vehicles without powertrain or battery) to provide a realistic basis for the analysis. The conventional and lightweight gliders are based on the Ford Fusion and Multi Material Lightweight Vehicle, respectively. These gliders were modelled with internal combustion engine vehicle (ICEV), hybrid electric vehicle (HEV), and battery electric vehicle (BEV) powertrains. The probability that using the lightweight glider in place of the conventional (steel-intensive) glider reduces life cycle GHG emissions are: ICEV, 100%; HEV, 100%, and BEV, 74%.The extent to which life cycle GHG emissions are reduced depends on the powertrain, which affects fuel cycle GHG emissions. Lightweighting an ICEV results in greater base case GHG emissions mitigation (10 t CO₂eq.) than lightweighting a more efficient HEV (6 t CO₂eq.). BEV lightweighting can result in higher or lower GHG mitigation than gasoline vehicles, depending largely on the source of electricity.     

Intent to purchase a plug-in electric vehicle: A survey of early impressions in large US cites

This paper examines consumer stated intent to purchase plug-in electric vehicles and assesses the factors that increase or decrease interest. We surveyed adult drivers in large US cities in early fall 2011, before vehicle manufacturers and dealers began marketing campaigns. The survey responses thus document early impressions of this transport technology. We find that, given current battery technology and public perceptions, overall stated intent to purchase or lease electric vehicles is low. Interest in plug-in hybrid technology is somewhat greater than interest in all-electric technology. Consumers who express early interest in adopting electric vehicles are typically highly educated, previous owners of conventional hybrids, environmentally sensitive, and concerned about dependence on foreign oil. Enhanced fuel economy, the primary tangible advantage of plug-in technology, is recognized as favorable by respondents but fails to exert a strong influence on purchasing intentions. Interest in plug-in electric vehicles is shaped primarily by consumers’ perceptions of electric vehicle disadvantages.     

Demand forecasting of diesel passenger car considering consumer preference and government regulation in South Korea

Changing market regulations in South Korea have allowed diesel-fueled passenger cars in the domestic market. The diffusion of diesel cars is tied to issues of environmental impact, energy supply and demand, and changes in tax revenue. Policymakers can influence demand for diesel vehicles to protect social welfare and to observe international environmental protection laws. On the supply side, carmakers need to know consumer preferences regarding new vehicles to arrive at development strategies.This study uses microsimulated demand forecasting to address these issues and predict consumer demand for diesel passenger cars. The model accommodates governmental policies and car attributes such as price and engine efficiency. We find that consumers will likely prefer diesel passenger cars to gasoline ones due to the low operation costs of the former in spite of high purchase price when diesel is relatively cheaper than gasoline. Finally we find that diesel passenger cars will capture a 42% market penetration ratio under the pricing system suggested by the Ministry of Environment of Korea.     

International private and public reinforcing dependencies for the innovation of automotive emission control systems in Japan and USA

In the beginning of the 1970s, the economies of USA and Japan were growing fast and environmental pollution was increasing to alarming levels. As passenger car emissions were found to be significant and rapidly increasing, their reduction was specially targeted. Following a bill passed by US Congress in 1968, requirements were set in 1970 for the vehicle manufacturers to reduce the emissions of carbon monoxide (CO) and hydrocarbons (HC) with 90% by 1975, and nitrogen oxides (NO_x) with 90% by 1976. These requirements were soon adapted to the Japanese regulatory framework, and were known in both countries as the “Muskie Act” or “Muskie Law” after the senator who developed the original bill.The new requirements spurred tremendous research and development efforts. Car manufacturers and research institutions in USA, Japan and Europe investigated and developed alternative solutions, including gas turbine and steam engine vehicles. California, the USA state with the most severe air quality problems and the only state at the time allowed to establish more strict requirements than federal regulation, established requirements implying the use of oxidation catalysts in 1975 and three-way catalysts (TWC’s) in 1977. Japan as a nation adopted similar requirements 1976 and 1978. Export of cars from Japan to USA increased rapidly. The rest of USA adopted emission standards similar to California’s only in 1981, timing USA vehicle sales rebound after the energy crisis and grave economic downturn. Strict requirements were thus established only after more than a decade of civic and legal processes between federal authorities, the car manufacturers and NGO’s.The history of vehicle development is one of cooperation and competition. This paper argues that the international cooperation on different levels of society (government, industry and science) together with commercial competition between the two countries was strong, continuous and instrumental in enabling the development of technology, appropriate regulation and infrastructural changes and thus created a market for cleaner cars and effectively reduced emissions from the growing vehicle fleet. In other words, the introduction of TWCs was reinforced by the simultaneous development of mitigating technology in two car producing countries competing for market space.     

A comparison of technologies for carbon-neutral passenger transport

In this study, the use of energy carriers based on renewable energy sources in battery-powered electric vehicles (BPEVs), fuel-cell electric vehicles (FCEVs), hybrid electric vehicles (HEVs) and internal combustion engine vehicles (ICEVs) is compared regarding energy efficiency, emission and cost. There is the potential to double the primary energy compared with the current level by utilising vehicles with electric drivetrains. There is also major potential to increase the efficiency of conventional ICEVs. The energy and environmental cost of using a passenger car can be reduced by 50% solely by using improved ICEVs instead of ICEVs with current technical standard. All the studied vehicles with alternative powertrains (HEVs, FCEVs, and BPEVs) would have lower energy and environmental costs than the ICEV. The HEVs, FCEVs and BPEVs have, however, higher costs than the future methanol-fuelled ICEV, if the vehicle cost is added to the energy and environmental costs, even if significant cost reductions for key technologies such as fuel cells, batteries and fuel storages are assumed. The high-energy efficiency and low emissions of these vehicles cannot compensate for the high vehicle cost. The study indicates, however, that energy-efficiency improvements, combined with the use of renewable energy, would reduce the cost of CO₂ reduction by 40% compared with a strategy based on fuel substitution only.     

A technical analysis of model year 2011 US automobile efficiency

This paper investigates the new 2011 automobile fleet to quantify the variation in models’ efficiency and underlying technology attributes. This involves analysis of test data to quantify the aerodynamic, rolling resistance, and powertrain efficiency characteristics of each model, as well as analysis to understand relationships between these and vehicle fuel consumption. The findings indicate that while vehicles are about 14% efficient on average, there is wide variation and direct evidence of dramatically improved powertrain efficiency within existing models. Existing gasoline and diesel models demonstrate improved powertrain efficiency by over 25%, hybrid gasoline-electric powertrains by over 50%, fuel cells by a factor of three, and all-electric by a factor of four as compared to the average 2011 vehicle. Advanced aerodynamic and tire rolling resistance technologies are also in evidence.     

Consumers’ willingness to pay for alternative fuel vehicles: A comparative discrete choice analysis between the US and Japan

This paper conducts a comparative discrete choice analysis to estimate consumers’ willingness to pay (WTP) for electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) on the basis of the same stated preference survey carried out in the US and Japan in 2012. We also carry out a comparative analysis across four US states. We find that on average US consumers are more sensitive to fuel cost reductions and alternative fuel station availability than are Japanese consumers. With regard to the comparative analysis across the four US states, consumers’ WTP for a fuel cost reduction in California is considerably greater than in the other three states. We use the estimates obtained in the discrete choice analysis to examine the EV/PHEV market shares under several scenarios. In a base case scenario with relatively realistic attribute levels, conventional gasoline vehicles still dominate both in the US and Japan. However, in an innovation scenario with a significant purchase price reduction, we observe a high penetration of alternative fuel vehicles both in the US and Japan. We illustrate the potential use of a discrete choice analysis for forward-looking policy analysis, with the future opportunity to compare its predictions against actual revealed choices. In this case, increased purchase price subsidies are likely to have a significant impact on the market shares of alternative fuel vehicles.     

Hybrid- and battery-electric vehicles offer low-cost climate benefits in China

Car ownership in China is expected to grow dramatically in the coming decades. If growing personal vehicle demand is met with conventional cars, the increase in greenhouse gas emissions will be substantial. One way to mitigate carbon dioxide (CO₂) emissions from passenger travel is to meet growing demand for cars with alternative vehicles such as hybrid- and battery-electric vehicles (HEVs and BEVs). Our study examines the cost-effectiveness of transitioning from conventional cars to HEVs and BEVs, by calculating their marginal abatement cost (MAC) of carbon in the long-run. We find that transitioning from conventional to hybrid and battery electric light-duty, four-wheel vehicles can achieve carbon emissions reductions at a negative cost (i.e. at a net benefit) in China. In 2030, the average MAC is estimated to be about −$140/ton CO₂ for HEVs and −$515/ton CO₂-saved for BEVs, varying by key parameters. The total mitigation potential of each vehicle technology is estimated to be 1.38 million tons for HEVs and 0.75 million tons for BEVs.     

What is the market potential of plug-in electric vehicles as commercial passenger cars? A case study from Germany

Commercial passenger cars are a possible early market segment for plug-in electric vehicles (PEVs). Compared to privately owned vehicles, the commercial vehicle segment is characterized by higher mileage and a higher share of vehicle sales in Germany. To this point, there are only few studies which analyze the commercial passenger car sector and arrive at contradictory results due to insufficient driving profile data with an observation period of only one day. Here, we calculate the market potential of PEVs for the German commercial passenger car sector by determining the technical and economical potential for PEVs in 2020 from multi-day driving profiles. We find that commercial vehicles are better suited for PEVs than private ones since they show higher average annual mileage and drive more regularly. About 87% of the analyzed three-week vehicle profiles can technically be fulfilled by battery electric vehicles (BEVs) with an electric driving range of about 110 km while plug-in hybrid electric vehicles (PHEVs) with an electric range of 40 km could obtain an electric driving share of 60% on average. In moderate energy price scenarios, PEVs can reach a market share of 2–4% in the German commercial passenger car sales by 2020 and especially the large commercial branches (Trade, Manufacturing, Administrative services and Other services) are important. However, our analysis shows a high sensitivity of results to energy and battery prices as well as electric consumptions.     

Behavioural responses to vehicle emissions charging

Road pricing as an economic construct is not a new phenomenon in transportation research. Whilst fuel taxation and tolling of roads are common ways of raising revenue in many countries, these initiatives are primarily aimed at road infrastructure financing. Worldwide there has been growing interest in pricing structures designed to also manage the growing levels of traffic congestion and, in recent times, an increasing focus on generating reductions in carbon emissions from vehicle ownership and use. This paper presents a stated choice experiment undertaken in response to the increasing interest in the environmental externalities of travel behaviour. The aim of this choice experiment is to identify the potential to switch to more fuel efficient cars that emit lower emissions, under differing pricing and technology scenarios. Results indicate that annual and variable emissions surcharges targeted very specifically to vehicle emission rates have a noticeable role in modifying vehicle purchasing decisions.     

A valuation of the environmental performance of vehicles: an analysis and comparison of two methodologies

The European Clean Vehicle Directive was introduced in 2009 to create an obligation on public authorities to take into account the impact of energy consumption, carbon dioxide (CO₂) emissions and pollutant emissions into their purchasing decisions for road transport vehicles. This should stimulate the market for clean and energy-efficient vehicles and improve transport's impact on environment, climate change and energy use. Therefore the so-called ‘Operational Lifetime Cost’ of a vehicle is calculated, divided into the cost for energy consumption, CO₂ and pollutant (nitrous oxide, particulate matter, non-methane hydrocarbons) emissions. In Belgium, a different methodology has been developed to calculate the environmental impact of a vehicle, called ‘Ecoscore’, based on a well-to-wheel approach. More pollutants are included compared to the Clean Vehicle methodology, but also indirect emissions are taken into account. In this paper, both methodologies are compared and used to analyze the environmental performance of passenger cars with different fuel types and from different vehicle segments. Similar rankings between both methodologies are obtained; however, the large impact of energy use (and CO₂ emissions) in the Clean Vehicle methodology disadvantages compressed natural gas cars, as well as diesel cars equipped with particulate filters, compared to the Ecoscore methodology.     

The diffusion of cleaner vehicles in CO2 emission trading designs

The accelerated diffusion of cleaner vehicles to reduce CO₂ emissions in transport can be explicitly integrated in emission trading designs by making use of cross-sectoral energy efficiency investment opportunities that are found in data on CO₂ emissions during the production and the use of cars and trucks. We therefore elaborate the introduction of tradable certificates that are allocated or grandfathered to manufacturers that provide vehicles (and other durable goods) that enable their customers to reduce their own CO₂ emissions. This certificate is an allowance for each tonne CO₂ avoided. Manufacturers can then sell these certificates on the emission market and use the revenues to lower the price of their cleanest vehicles. This mechanism should partially overcome the price difference with less efficient cars. In a simulation, we found that the introduction of the certificate in tradable permit systems can lead to very significant reductions of CO₂ emissions. The simulations indicate that CO₂ emissions resulting from the car fleet can be reduced by 25 to 38% over a period of 15 years (starting in 1999). For the truck fleet, the reduction potential is more limited but still very interesting.     

Reducing CO2 emissions of conventional fuel cars by vehicle photovoltaic roofs

The European Union has adopted a range of policies aiming at reducing greenhouse gas emissions from road transport, including setting binding targets for tailpipe CO₂ emissions for new light-duty fleets. The legislative framework for implementing such targets allows taking into account the CO₂ savings from innovative technologies that cannot be adequately quantified by the standard test cycle CO₂ measurement. This paper presents a methodology to define the average productivity of vehicle-mounted photovoltaic roofs and to quantify the resulting CO₂ benefits for conventional combustion engine-powered passenger cars in the European Union. The method relies on the analysis of a large dataset of vehicles activity data, i.e. urban driving patterns acquired with GPS systems, combined with an assessment of the shading effect from physical obstacles and indoor parking. The results show that on average the vehicle photovoltaic roof receives 58% of the available solar radiation in real-world conditions, making it possible to reduce CO₂ emissions from passenger cars in a range from 1% to 3%, assuming a storage capacity of 20% of the 12 V battery dedicated to solar energy. This methodology can be applied to other vehicles types, such as light and heavy-duty, as well as to different powertrain configurations, such as hybrid and full electric.     

Improving fuel consumption and CO2 emissions calculations in urban areas by coupling a dynamic micro traffic model with an instantaneous emissions model

Τhis study demonstrates the combination of a microscopic traffic simulator (AIMSUN) with an instantaneous emissions model (AVL CRUISE) to investigate the impact of traffic congestion on fuel consumption on an urban arterial road. The micro traffic model was enhanced by an improved car-following law according to Morello et al. (2014) and was calibrated to replicate measured driving patterns over an urban corridor in Turin, Italy, operating under adaptive urban traffic control (UTC). The method was implemented to study the impact of congestion on fuel consumption for the category of Euro 5 diesel <1.4 l passenger cars. Free flow and congested conditions led to respective consumption differences of −25.8% and 20.9% over normal traffic. COPERT 5 rather well predicted the impact of congestion but resulted to a much lower relative reduction in free flow conditions. Start and stop system was estimated to reduce consumption by 6% and 11.9% under normal and congested conditions, respectively. Using the same modelling approach, UTC was found to have a positive impact on CO₂ emissions of 8.1% and 4.5% for normal and congested conditions, respectively, considering the Turin vehicle fleet mix for the year 2013. Overall, the study demonstrates that the combination of detailed and validated micro traffic and emissions models offers a powerful combination to study traffic and powertrain impacts on greenhouse gas and fuel consumption of on road vehicles over a city network.     

Strategies to achieve deep reductions in metropolitan transportation GHG emissions: the case of Philadelphia

ABSTRACT

This paper investigates strategies that could achieve an 80% reduction in transportation emissions from current levels by 2050 in the City of Philadelphia. The baseline daily lifecycle emissions generated by road transportation in the Greater Philadelphia Region in 2012 were quantified using trip information from the 2012 Household Travel Survey (HTS). Emissions were projected to the year 2050 accounting for population growth and trends in vehicle technology for both the Greater Philadelphia Region and the City of Philadelphia. The impacts of vehicle technology and shifts in travel modes on greenhouse gas (GHG) emissions in 2050 were quantified using a scenario approach. The analysis of 12 different scenarios suggests that 80% reduction in emissions is technically feasible through a combination of active transportation, cleaner fuels for public transit vehicles, and a significant market penetration of battery-electric vehicles. The additional electricity demand associated with greater use of electric vehicles could amount to 10.8 TWh/year. The use of plug-in hybrid electric vehicles (PHEV) shows promising results due to high reductions in GHG emissions at a potentially manageable cost.     

Model aided policy development for the market penetration of natural gas vehicles in Switzerland

Introduction of alternative fuels in the passenger car fleet is widely discussed in the light of emission reductions. Worldwide experiences show that the market introduction depends on the actions of many stakeholders, like car industry, fuel companies and consumers. The process demands well-timed actions and investments, whilst economic chances and risks are distributed highly unequally. Policy makers set the framework conditions, although the influence of the height and timing of subsidies, tax reductions and other stimulation policies are not well understood yet.The market introduction of alternative fuel vehicles was studied with the example of natural gas cars in Switzerland. Stakeholder analysis and system dynamics modeling techniques were used to characterize the system. Analyses identify difficulties and chances in the market penetration process of natural gas cars. For example, a critical balance between fueling station upgrade investments and natural gas car sales is needed. Further, it is found that large time delays exist between strategic policy actions and frequently used market penetration indicators (e.g. car sales and infrastructure expansion), limiting the ability of policy makers to assess the performance of their strategy. Referring to elements of the Balanced Scorecard approach, a set of five alternative indicators is proposed to better measure the performance of the implemented strategy.     

Projecting adoption of truck powertrain technologies and CO2 emissions in line-haul networks

In this paper we present a mixed-integer linear program to represent the decision-making process for heterogeneous fleets selecting vehicles and allocating them on freight delivery routes to minimize total cost of ownership. This formulation is implemented to project alternative powertrain technology adoption and utilization trends for a set of line-haul fleets operating on a regional network. Alternative powertrain technologies include compressed (CNG) and liquefied natural gas (LNG) engines, hybrid electric diesel, battery electric (BE), and hydrogen fuel cell (HFC). Future policies, economic factors, and availability of fueling and charging infrastructure are input assumptions to the proposed modeling framework. Powertrain technology adoption, vehicle utilization, and resulting CO₂ emissions predictions for a hypothetical, representative regional highway network are illustrated. A design of experiments (DOE) is used to quantify sensitivity of adoption outcomes to variation in vehicle performance parameters, fuel costs, economic incentives, and fueling and charging infrastructure considerations. Three mixed-adoption scenarios, including BE, HFC, and CNG vehicle market penetration, are identified by the DOE study that demonstrate the potential to reduce cumulative CO₂ emissions by more than 25% throughout the period of study.     

Environmental life-cycle assessment of transit buses with alternative fuel technology

The paper presents a life-cycle assessment of costs and greenhouse gas emissions for transit buses deploying a hybrid input-output model to compare ultra-low sulfur diesel to hybrid diesel-electric, compressed natural gas, and hydrogen fuel-cell. We estimate the costs of emissions reductions from alternative fuel vehicles over the life cycle and examine the sensitivity of the results to changes in fuel prices, passenger demand, and to technological characteristics influencing performance and emissions. We find that the alternative fuel buses reduce operating costs and emissions, but increase life-cycle costs. The infrastructure requirement to deploy and operate alternative fuel buses is critical in the comparison of life-cycle emissions. Additionally, efficient bus choice is sensitive to passenger demand, but only moderately sensitive to technological characteristics, and that the relative efficiency of compressed natural gas buses is more sensitive to changes in fuel prices than that of the other bus types.