海洋平台中KK管节点表面裂纹应力强度因子的有限元计算方法

海洋平台中的KK管节点由于长期承受循环载荷而容易在焊缝处产生疲劳表面裂纹.对包含表面裂纹的KK节点的残余寿命的评估依赖于对表面裂纹应力强度因子的准确估算.本文首先提出了KK节点中表面裂纹的有限元网格产生方法,然后采用线弹性断裂力学理论,通过裂纹前缘的位移外推插值法分析了KK节点在轴向力作用下沿着表面裂纹的应力强度因子的分布情况.最后,通过对22个KK节点的模型分析,研究了节点的几何参数和裂纹形状参数对应力强度因子的影响情况.     

海上平台管节点疲劳性能研究

在研究D500系列管节点疲劳特性的基础上，吸取国内外研究成果，建立了适用较广的可靠的管节点疲劳寿命计算方法．文章给出了建立在大量数据基础上的S－N曲线，探讨了影响疲劳寿命的因素，进行了局部应力—应变法及断裂力学法计算分析，对海洋平台管节点提出了适用于工程实际的建议．     

轴力作用下X型焊接管节点热点应力的分布规律

海洋平台中的焊接管节点的疲劳寿命是由热点应力的大小和分布决定。热点应力的大小决定了管节点在疲劳失效前所能承受的循环荷载的次数,而热点应力的位置则决定了疲劳裂纹的萌生位置和扩展方式。文中采用有限元方法分析了承受轴向拉力作用的X型焊接管节点在焊缝周围的热点应力的分布情况,通过对112个X节点进行的模型分析,研究了节点几何参数对热点应力大小和分布规律的影响。     

一种新的海洋平台管节点应力评估方法

海洋工程焊接管节点受应力集中及复杂随机载荷的联合作用,容易发生疲劳破坏。为了提高焊接管节点结构疲劳寿命预测的准确性,文章以管壁厚方向上的一点作为疲劳评估点,提出了一种新的管节点结构应力计算方法。通过与国际上公开发表的疲劳试验数据进行比较,证明了文中方法应用于管节点结构的可行性及考虑壁厚方向应力梯度的有效性。基于数值计算,文中还提出了可用于T型管节点应力集中系数计算的参数公式,并对参数公式的精度进行了验证。     

Structural behavior and design of high-strength steel welded tubular connections under extreme loading

The present work is motivated by the increasing need for cost-efficient solutions in offshore structural systems for wind energy production and for improvement of their structural performance. The structural behavior and design of high-strength steel welded tubular connections (yield strength higher than 700 MPa) subjected to monotonic and strong cyclic loading is investigated. In the first part of the paper, an experimental investigation is presented on high-strength steel tubular X-joints subjected to monotonic and cyclic loading far beyond the elastic limit of the material, leading to weld fracture. Two grades of weld metal material are employed in the welding process of the specimens. The experimental results indicate that the weld material grade has a significant influence on the deformation capacity of the welded connection under monotonic loading conditions, and its low-cycle fatigue life. The experimental procedure is simulated using advanced finite element models, elucidating several features of joint behavior and complementing the experimental results. Overall, a good agreement is found between numerical simulations and experimental results, in terms of both global response and local strains at the vicinity of the welds. Furthermore, the structural performance of the welded tubular joints under consideration is assessed using available design methodologies in terms of both ultimate strength and low-cycle fatigue resistance, in an attempt to validate an efficient design methodology for low-cycle fatigue. The results from this research effort are aimed at developing the necessary background for the possible use of high-strength steel in tubular steel lattice structures, particularly in offshore platforms for renewable energy production. They can also be used as a basis for the possible amendment of relevant design specifications and recommendations for including special provisions for high-strength steel structural systems.     

T型接头焊趾表面裂纹应力强度因子的简化计算方法

T型接头是船舶与海洋结构物的典型结构形式之一,其焊趾处常常是疲劳热点区域。T型接头焊趾表面裂纹的应力强度因子是船舶与海洋结构的、基于断裂力学安全评定和疲劳寿命预测的基础。本文对T型接头表面裂纹应力强度因子的计算方法,尤其是Bow ness等人提出的T型接头焊趾表面裂纹应力强度因子的计算公式进行了分析,在此基础上导出了形式简单,物理意义明确的T型接头焊趾表面裂纹应力强度因子的简化计算公式,并和相关的应力强度因子的计算结果进行了比较,证明了本文简化方法的可行性。     

海洋平台结构系统疲劳可靠性分析方法

本文研究了海洋平台结构系统疲劳可靠性评估方法。文中对平台结构简生管节点疲劳可靠性分析模型进行了简单的评述，在该模型的基础上，建立了用S－N曲线模型与断裂力学模型分别计算平台完好管节点及有初始裂纹管节点疲劳寿命的平告结构系统疲劳可靠性分析模型。作为一个算例，文中运用作者开发的程序系统，对一固定式导管架平台进行了疲劳可靠性计算。     

变幅载荷作用下焊接接头疲劳寿命预测方法

船舶与海洋结构物在其服役过程中受到波浪等载荷的交变作用而引起结构的疲劳损伤.检测结果表明船舶及海洋结构的疲劳热点部位大多数是在构件相互连接的焊缝焊趾处.因此,研究典型接头表面裂纹应力强度因子统一计算方法以及变幅载荷作用下表面裂纹扩展规律对船舶与海洋结构物的寿命预测是十分重要的.本文讨论了裂纹闭合及开口比的计算,在Newman有效应力强度因子计算方法的基础上,提出了考虑因素更全面的有效应力强度因子幅计算式以及变幅载荷作用下船舶与海洋结构物典型焊接接头疲劳裂纹扩展寿命预测模型.     

Crack growth direction effects on corrosion-fatigue behaviour of offshore wind turbine steel weldments

In this study corrosion-fatigue tests have been conducted on fracture mechanics specimens extracted from an S355 G10+M structural steel welded plate. The tests have been performed on compact tension specimens with the crack tip located in the heat affected zone. The corrosion-fatigue test results from this study have been compared with the data available on the base metal as well as air tests on the same material. Moreover, the obtained results have been compared with the corrosion-fatigue data available in the literature on a wide range of steels and also the fatigue trends for welded joints in free-corrosion condition recommended in the BS7910 Standard. The effect of the specimen orientation, with respect to the weld region, is also examined in this study and it has been found that higher corrosion-fatigue crack growth rates are generally observed in the tests with 0° orientation. The results have also shown that the corrosive environment has significant effects on the fatigue crack growth acceleration at the beginning of the tests; however, as the crack propagates, the environmental damage effect on crack growth behaviour becomes less pronounced. The results presented in this study are discussed in terms of improvement in the structural integrity assessment of offshore wind turbine monopiles.     

Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints

Many accidents are caused by fatigue in welded built-up steel structures, and so it is important to estimate the fatigue lives of such structures quantitatively for safety reasons. By assuming that fatigue cracks cannot grow without an accumulation of alternating tensile/compressional plastic strain, one of the authors identified an improved effective stress intensity factor range ΔK _RPG based on the re-tensile plastic zone generating (RPG) load, which represents the driving force for fatigue cracks, and suggested that ΔK _RPG should be used as the parameter to describe fatigue crack growth behavior. The “FLARP” numerical simulation code in which ΔK _RPG is implemented as the fatigue crack growth parameter, was developed in order to predict fatigue crack initiation and propagation behavior. In this paper, it is demonstrated that FLARP gives accurate estimates for fatigue life by comparing the estimated fatigue crack growth curves and S–N curves with the experimental results for in-plane gusset welded joints, which are used in many welded steel structures. Moreover, the effect of induced bending moment due to the linear misalignment in the out of plane direction on the fatigue strength of in-plane gusset welded joints is investigated through numerical simulations.     

A probabilistic damage tolerance concept for welded joints. Part 1: data base and stochastic modelling

The present paper presents the necessary crack growth statistics and suggests stochastic models for a reliability analysis of the fatigue fracture of welded steel plate joints. The reliability levels are derived from extensive testing with fillet-welded joints for which the entire crack growth history has been measured, not only the final fatigue life. The statistics for the time to reach given crack depths are determined. Fracture-mechanics-derived crack growth curves are fitted to the measured experimental curves and the best fit defines the growth parameters involved for each test specimen. The derived statistics and distribution function for these parameters are used as variables in a Monte Carlo simulation (MCS). In addition a Markov model is developed as an alternative stochastic model. It is a Markov chain for which the discrete damage states are related to chosen crack depths in the material. This model works directly with the experimental time statistics. It is a “stochastic bulk approach” not involving any random variables or fracture mechanics modeling. Both models are fitted to the data base and scaled to in-service conditions. Both methods are compared and discussed. The aim is to provide data for the variables used in a MCS and to develop a Markov chain for fast reliability calculation, especially when predicting the most likely influence of numerous future inspections.     

Fatigue crack growth behaviour of A5083 series aluminium alloys and their welded joints

We investigated the difference in fatigue behaviour between the aluminium alloys A5083-O and A5083-H321, which are used as structural components in ships and high speed craft. We obtained S–N curves for the base materials and the welded joints made of A5083-O. The relationships between the fatigue crack propagation rates and the stress intensity factor ranges ΔK, ΔK _eff and ΔK _RPG (Toyosada et al. in Int J Fatigue 26(9):983–992, 2004) were determined. Additionally, the evolution of fatigue crack growth for the base materials and the welded joints made of A5083-O was measured. We also carried out numerical simulations of fatigue crack growth for both base metals and their welded joints made of A5083-O. The difference in fatigue crack growth behaviour for each alloy and the validity of the numerical simulations of fatigue crack growth based on the RPG stress criterion (Toyosada et al. 2004) in the base materials and their welded joints was investigated.     

疲劳载荷作用下焊接点三维线弹性弯曲裂纹路径预测

利用二阶摄动方法研究了疲劳载荷作用下结构线弹性裂纹的弯曲扩展问题并求解了三维动态应力强度因子.利用二阶摄动方法研究了疲劳载荷作用下裂纹路径预测时的应力准则与能量准则之间的关系.就均匀物质而言,在二阶摄动分析理论的框架内,两种准则指明了相同的三维疲劳弯曲裂纹扩展路径.但在具有非均匀断裂韧度的物质中,能量准则优越于应力准则.作为二阶摄动方法的实际运用,研究了焊接结构中疲劳线弹性裂纹的形态特征和弯曲扩展路径问题,综合考虑了诸如远场动态作用应力、焊接残余应力、局部物质衰变以及不同尺寸的缺陷的存在等因素,绘制出疲劳载荷作用下退化区域中裂纹弯曲扩展的临界轨迹曲线.     

肘板趾端表面裂纹在随机波浪载荷作用下的疲劳扩展预报

肘板趾端是船舶与海洋结构的疲劳热点。文章用三维有限元分析了趾端表面裂纹应力强度因子修正系数的变化规律,并与BS7910推荐的典型节点表面裂纹应力强度因子公式计算结果作了对比,结果表明趾端表面裂纹应力强度因子沿深度方向的放大系数和T型节点相差很小,而表面端点应力强度因子修正系数则当裂纹长度在肘板厚度范围内时和T型节点相差很小,超出后则相差较大。以某客滚船上肘板趾端应力范围长期分布服从Weibull分布,产生系列均值为零的应力幅,应力强度因子分别采用有限元结果和BS7910中T型接头公式进行计算,采用单一曲线模型计算该趾端表面裂纹的裂纹扩展。计算等效应力强度因子幅时,考虑焊接残余应力的影响。计算结果表明以T型接头的公式计算趾端表面裂纹应力强度因子和有限元结果相差很小。建议将T型节点表面裂纹应力强度因子计算公式用于趾端表面裂纹应力强度因子的计算,并采用单一曲线模型对随机波浪载荷下作用下船舶典型节点疲劳裂纹的扩展寿命进行了预报。     

Numerical simulation of fatigue crack propagation under biaxial tensile loadings with phase differences

Fatigue crack propagation under the biaxial tensile loading, which loading directions are normal and parallel to the initial crack position, is highlighted in this study. Most of in-service structures and vessels are subjected to many types of loading. Generally, these loadings have different axial components with different phases. However, the structural integrities of structures and vessels are evaluated according to design codes based on theoretical and experimental investigations under a uniaxial loading condition. Most of these codes are based on the S–N curves approach. An approach that does not use S–N curves has been favored by researchers, with the fracture mechanics approach preferred for evaluating the fatigue life of structures. An advanced fracture mechanics approach was developed based on the Re-tensile Plastic zone Generating (RPG) stress criterion for fatigue crack propagation. In this study, fatigue crack propagation tests under biaxial loading with six different phase and loading conditions are performed and the effect of the phase difference under biaxial loading is evaluated. A numerical simulation method of fatigue crack propagation based on the RPG stress criterion under different biaxial loading phase conditions is presented and compared to measured data.     

随机海况下的船体结构疲劳裂纹扩展

传统的疲劳问题一般都是采用S—N曲线及Miner累计损伤理论进行的,文章在基于断裂力学的基础上,通过权函数法来计算应力沿裂纹面的非线性效应力强度因子,鉴于船舶在海洋环境中受到载荷的随机性,充分考虑加载次序、过载峰和应力比等对裂纹扩展的影响,给出了船舶结构疲劳裂纹在随机载荷下的扩展寿命的计算过程。     

基于奇异强度理论的疲劳特性评估方法

疲劳是海洋结构物破坏的重要因素,为简化舰船结构疲劳评估方法,基于线弹性断裂力学和切口应力强度理论,针对典型薄板结构研究拐角节点处的应力强度,分析结构形式,利用ANSYS有限元模拟和MathCAD函数拟合,分别给出计算应力强度因子的＂奇异权函数法＂和＂奇异等效裂纹法＂的研究方法,同时给出简便算法和经验公式。进而应用Paris裂纹扩展法则进行结构奇异强度疲劳特性评估,并结合S-N曲线分析拐角节点处的应力集中,得到与结构尺寸相关的＂奇异应力集中系数＂函数。最后,针对切口应力,提出有限元分析所需要的＂奇异应力等效取值点＂的参考位置。希望能将奇异强度理论纳入船舶结构疲劳强度校核规范中做参考。     

Fatigue resistance of welded steel tubular X-joints

High-cycle fatigue experiments are performed on welded tubular steel X-joints, with braces and chord of equal diameter. They are scaled-down joints, used extensively in offshore wind platforms. Three different welding procedures are considered in specimen fabrication: manual, fully-automatic and manual with HFMI post-weld treatment. Τwo possible locations for crack initiation were identified: chord “crown” and “in-between location”, also verified by numerical calculations and fractography of failed specimens. Monotonic loading tests on fatigue-cracked specimens showed good performance in terms of ultimate strength and deformation capacity, despite the presence of through-thickness cracks. The results are compared with predictions from relevant design standards.     

基于形函数插值理论预测轴力作用下T型管节点热点应力的分布规律

海洋平台中管节点的疲劳寿命由焊缝周围热点应力的分布情况决定.该文采用有限元方法分析了承受轴向力作用下T节点焊缝周围的应力分布规律.通过对140个具有不同几何形状的T节点模型的有限元分析结果.提出了一种基于形函数插值理论的方法预测T节点焊缝周围的应力分布,并且通过比较插值法得到的结果和有限元结果进行比较,验证了这种方法的准确性.     

Stress magnification effect of initial deformation on the notch stress field and fatigue strength of thin plate welded joints

Compared with thick plate welded joint, the welding joint of thin plate will produce initial deformation due to its low bending rigidity. The existence of initial deformation will cause the welded structure to produce secondary bending effect, which will produce greater stress magnification effect at the weld toe and seriously affect the fatigue strength of thin plate welded joints. Therefore, based on the correction formula of thick plate, considering the influence of initial deformation and geometric nonlinearity of thin plate, this paper deduces the stress magnification factor formula at the weld toe of T-shaped and cruciform specimens. The accuracy of the revised formula is further verified by comparing the notch stress calculated by the modified formula with the FE results. Finally, the modified formula is applied to the notch stress and fatigue evaluation of typical thin plate welded joints respectively. The results show that the proposed notch stress calculation formula can fully consider the stress amplification effect of thin plate structure, and can be used to quickly evaluate the notch stress field and fatigue strength of thin plate welded joints.