Coordinated control strategies for active steering,differential braking and active suspension for vehicle stability,handling and safety improvement

ABSTRACT

In this paper, a coordinated control strategy is proposed to provide an effective improvement in handling stability of the vehicle, safety, and comfortable ride for passengers. This control strategy is based on the coordination among active steering, differential braking, and active suspension systems. Two families of controllers are used for this purpose, which are the high order sliding mode and the backstepping controllers. The control strategy was tested on a full nonlinear vehicle model in the environment of MATLAB/Simulink. Rollover avoidance and yaw stability control constraints have been considered. The control system mainly focuses on yaw stability control. When rollover risk is detected, the proposed strategy controls the roll dynamics to decrease rollover propensity. Simulation results for two different critical driving scenarios, the first one is a double lane change and the other one is a J-turn manoeuvre, show the effectiveness of the coordination strategy in stabilising the vehicle, enhancing handling and reducing rollover propensity.     

An adaptive integrated algorithm for active front steering and direct yaw moment control based on direct Lyapunov method

In this article, an adaptive integrated control algorithm based on active front steering and direct yaw moment control using direct Lyapunov method is proposed. Variation of cornering stiffness is considered through adaptation laws in the algorithm to ensure robustness of the integrated controller. A simple two degrees of freedom (DOF) vehicle model is used to develop the control algorithm. To evaluate the control algorithm developed here, a nonlinear eight-DOF vehicle model along with a combined-slip tyre model and a single-point preview driver model are used. Control commands are executed through correction steering angle on front wheels and braking torque applied on one of the four wheels. Simulation of a double lane change manoeuvre using Matlab^®/Simulink is used for evaluation of the control algorithm. Simulation results show that the integrated control algorithm can significantly enhance vehicle stability during emergency evasive manoeuvres on various road conditions ranging from dry asphalt to very slippery packed snow road surfaces.     

Vehicle Dynamic Control for In-Wheel Electric Vehicles Via Temperature Consideration of Braking Systems

?Vehicle dynamic control (VDC) systems play an important role with regard to vehicle stability and safety when turning. VDC systems prevent vehicles from spinning or slipping when cornering sharply by controlling vehicle yaw moment, which is generated by braking forces. Thus, it is important to control braking forces depending on the driving conditions of the vehicle. The required yaw moment to stabilize a vehicle is calculated through optimal control and a combination of braking forces used to generate the calculated yaw moment. However, braking forces can change due to frictional coefficients being affected by variations in temperature. This can cause vehicles to experience stability problems due an improper yaw moment being applied to the vehicle. In this paper, a brake temperature estimator based on the finite different method (FDM) was proposed with a friction coefficient estimator in order to solve this problem. The developed braking characteristic estimation model was used to develop a VDC cooperative control algorithm using hydraulic braking and the regenerative braking of an in-wheel motor. Performance simulations of the developed cooperative control algorithm were performed through cosimulation with MATLAB/Simulink and CarSim. From the simulation results, it was verified that vehicle stability was ensured despite any changes in the braking characteristics due to brake temperatures.     

基于蚁狮算法的UKF车辆状态参数估计器

为了准确获取分布式驱动电动汽车状态参数信息，满足车辆稳定性控制系统的需求，提出一种基于蚁狮算法的无迹卡尔曼滤波状态参数估计器。针对无迹卡尔曼滤波（UKF）过程中噪声协方差矩阵的不确定性，采用蚁狮优化算法（ALO）对其进行寻优，并引入奇异值分解（SVD）的方法来维持噪声协方差矩阵的正定性，此外，基于指数加权最小二乘法对车辆侧偏刚度进行辨识并将其作为状态参数估计器输入。基于MATLAB/Simulink和CarSim联合仿真平台，建立分布式驱动电动汽车参数估计模型，分别进行双移线工况和正弦迟滞工况仿真，并基于A&D5435快速原型开发平台进行双移线工况实车试验。仿真与试验结果表明：相比于SVDUKF算法估计结果，双移线仿真工况下，基于ALO-SVDUKF算法估计得到的质心侧偏角和横摆角速度的均方根误差分别降低了55.7%、30.7%，正弦迟滞仿真工况下，均方根误差分别降低了58.1%、85.1%，且在车辆处于极限失稳状态时仍能维持较好的估计效果；双移线试验工况下，横摆角速度的估计值与实际测量值之间的均方根误差仅为0.938 4（°）·s^-1；提出的基于ALO-SVDUKF算法的分布式驱动电动汽车状态参数估计器能够有效提高质心侧偏角和横摆角速度的估计精度，可为车辆稳定性控制提供精确的状态信息。     

Vehicle dynamics control by using a three-dimensional stabilizer pendulum system

Active safety systems of a vehicle normally work well on tyre–road interactions, however, these systems deteriorate in performance on low-friction road conditions. To combat this effect, an innovative idea for the yaw moment and roll dynamic control is presented in this paper. This idea was inspired by the chase and run dynamics animals like cheetahs in the nature; cheetahs have the ability to swerve while running at very high speeds. A cheetah controls its dynamics by rotating its long tail. A three-dimensional stabilizer pendulum system (3D-SPS) resembles the rotational motion of the tail of a cheetah to improve the stability and safety of a vehicle. The idea has been developed in a stand-alone 3D stabilizer pendulum system as well as in an integrated control system, which consists of an ordinary differential braking direct yaw control (DYC) and active steering control that is assisted by the 3D-SPS. The performance of the proposed 3D-SPS has been evaluated over a wide range of handling manoeuvres by using a comprehensive numerical simulation. The results show the advantage of 3D-SPS over conventional control approaches, which are ineffective on low-friction road conditions and high lateral acceleration manoeuvres. It should however be noted that the best vehicle dynamics performance is obtained when an integrated 3D-SPS and DYC and AFS is utilised.     

Integrated Control of Active Rear Wheel Steering and Direct Yaw Moment Control

SUMMARY

An integrated control system of active rear wheel steering (4WS) and direct yaw moment control (DYC) is presented in this paper. Because of the tire nonlinearity that is mainly due to the saturation of cornering forces, vehicle handling performance is improved but limited to a certain extent only by steering control. Direct yaw moment control using braking and/or driving forces is effective not only in linear but also nonlinear ranges of tire friction circle. The proposed control system is a model matching controller which makes the vehicle follow the desired dynamic model by the state feedback of both yaw rate and side slip angle. Various computer simulations are carried out and show that vehicle handling performance is much improved by the integrated control system.     

Regenerative braking strategies,vehicle safety and stability control systems: critical use-case proposals

The sustainable development of vehicle propulsion systems that have mainly focused on reduction of fuel consumption (i.e. CO₂ emission) has led, not only to the development of systems connected with combustion processes but also to legislation and testing procedures. In recent years, the low carbon policy has made hybrid vehicles and fully electric vehicles (H/EVs) popular. The main virtue of these propulsion systems is their ability to restore some of the expended energy from kinetic movement, e.g. the braking process. Consequently new research and testing methods for H/EVs are currently being developed. This especially concerns the critical ‘use-cases’ for functionality tests within dynamic events for both virtual simulations, as well as real-time road tests. The use-case for conventional vehicles for numerical simulations and road tests are well established. However, the wide variety of tests and their great number (close to a thousand) creates a need for selection, in the first place, and the creation of critical use-cases suitable for testing H/EVs in both virtual and real-world environments. It is known that a marginal improvement in the regenerative braking ratio can significantly improve the vehicle range and, therefore, the economic cost of its operation. In modern vehicles, vehicle dynamics control systems play the principal role in safety, comfort and economic operation. Unfortunately, however, the existing standard road test scenarios are insufficient for H/EVs. Sector knowledge suggests that there are currently no agreed tests scenarios to fully investigate the effects of brake blending between conventional and regenerative braking as well as the regenerative braking interaction with active driving safety systems (ADSS). The paper presents seven manoeuvres, which are considered to be suitable and highly informative for the development and examination of H/EVs with regenerative braking capability. The critical manoeuvres presented are considered to be appropriate for examination of the regenerative braking mode according to ADSS. The manoeuvres are also important for investigation of regenerative braking system properties/functionalities that are specified by the legal requirements concerning H/EVs braking systems. The last part of this paper shows simulation results for one of the proposed manoeuvres that explicitly shows the usefulness of the manoeuvre.     

高速公路ETC交易耗时估计与车道分区设计

大多数高速公路ETC车道的长度都是以停车视距计算方法为设计依据的,但这忽视了各省市ETC交易耗时的差异,且此依据与ETC系统可实现不停车自动收费的目标相矛盾。不合理的车道长度会导致部分车辆因时间不足而无法完成交易,或出现跟车干扰等现象,降低收费站服务水平。以陕西省170多万条交易数据为样本,采用随机过程与数理统计方法,对交易耗时进行数字特征分析和参数估计,并提出ETC车道划分为交易区和安全控制区,将置信度为99.9%的交易耗时估计结果和停车制动距离应用于区域长度设计中。陕西全省ETC系统建设实践证明,该方法提高了ETC车辆通过率,保障了行车安全,取得了良好效果。     

用于电子稳定程序的汽车模型和控制策略

电子稳定程序(ElectronicStabilityProgram)是行驶车辆的一种主动安全系统,它综合了制动防抱死系统,驱动力控制系统和横摆力矩控制系统,使行驶车辆的安全性得到很大的提高。本文首先建立用于电子稳定程序的汽车模型,包括车身模型、悬架模型、转向模型、轮胎模型、制动系统模型、发动机模型和传动系模型。然后建立了主动横摆控制的控制逻辑,通过加入制动防抱死系统和牵引力控制系统,构成了电子稳定程序的控制逻辑。最后对移线运动、紧急转向、制动转向、驱动转向4个典型的工况进行仿真,从而验证了电子稳定程序控制逻辑的正确性。     

Improvement of Vehicle Maneuverability by Direct Yaw Moment Control

SUMMARY

This paper deals with a study to theoretically formulate an effective method of improving vehicle performance, particularly, its characteristics in the nonlinear region, and to verify the feasibility of the proposed method by calculations and examinations. In order to analyze vehicle characteristics in the nonlinear region, a new method of analysis was developed for determining yaw moment and side force of the vehicle with a parameter of the side slip angle at the center of gravity when its center of gravity point was fixed. The study with this new method found that direct yaw moment control by proper distribution of traction and braking forces on the right and left tires could provide a very effective means of stabilizing vehicle characteristics, specifically for acceleration and deceleration, and enlarging the limit of vehicle maneuverability.     

Unified decision-making and control for highway collision avoidance using active front steer and individual wheel torque control

ABSTRACT

Collision avoidance is a crucial function for all ground vehicles, and using integrated chassis systems to support the driver presents a growing opportunity in active safety. With actuators such as in-wheel electric motors, active front steer and individual wheel brake control, there is an opportunity to develop integrated chassis systems that fully support the driver in safety critical situations. Here we consider the scenario of an impending frontal collision with a stationary or slower moving vehicle in the same driving lane. Traditionally, researchers have approached the required collision avoidance manoeuver as a hierarchical scheme, which separates the decision-making, path planning and path tracking. In this context, a key decision is whether to perform straight-line braking, or steer to change lanes, or indeed perform combined braking and steering. This paper approaches the collision avoidance directly from the perspective of constrained dynamic optimisation, using a single optimisation procedure to cover these aspects within a single online optimisation scheme of model predictive control (MPC). While the new approach is demonstrated in the context of a fully autonomous safety system, it is expected that the same approach can incorporate driver inputs as additional constraints, yielding a flexible and coherent driver assistance system.     

Integrated fuzzy/optimal vehicle dynamic control

There are basically two methods to control yaw moment which is the most efficient way to improve vehicle stability and handling. The first method is indirect yaw moment control, which works based on control of the lateral tire force through steering angle control. It is mainly known as active steering control (ASC). Nowadays, the most practical approach to steering control is active front steering (AFS). The other method is direct yaw moment control (DYC), in which an unequal distribution of longitudinal tire forces (mainly braking forces) produces a compensating external yaw moment. It is well known that the AFS performance is limited in the non-linear vehicle handling region. On the other hand, in spite of a good performance of DYC in both the linear and non-linear vehicle handling regions, continued DYC activation could lead to uncomfortable driving conditions and an increase in the stopping distance in the case of emergency braking. It is recommended that DYC be used only in high-g critical maneuvers. In this paper, an integrated fuzzy/optimal AFS/DYC controller has been designed. The control system includes five individual optimal LQR control strategies; each one, has been designed for a specific driving condition. The strategies can cover low, medium, and high lateral acceleration maneuvers on high-μ or low-μ roads. A fuzzy blending logic also has been utilized to mange each LQR control strategy contribution level in the final control action. The simulation results show the advantages of the proposed control system over the individual AFS or DYC controllers.     

基于线性路径跟踪控制的换道避撞控制策略研究

为实现车辆自主避撞，改善道路交通安全状况，提出一种基于线性路径跟踪控制的换道避撞控制策略。为实时确定制动和换道时机，获取跟车状态下自车和前车车速、加速度、相对距离以及驾驶人制动反应时间计算制动安全距离和换道安全距离，并在此基础上分别引入制动危险系数B和换道危险系数S评估制动与换道风险，使得车辆发生追尾碰撞的危险程度和主动干预阈值更直观。根据车辆期望横向加速度和期望横向位移的变化特性，采用5次多项式法规划符合驾驶人换道避撞特性的避撞路径。为保证换道避撞过程中驾驶人的安全舒适，采用最大横向加速度约束换道避撞轨迹。为实现对换道避撞路径的线性跟踪控制，保证车辆的操纵稳定性和横摆稳定性，基于车辆稳态动力学模型建立前馈控制，结合线性反馈控制消除换道路径的位置和横摆角偏差，修正参考路径实现直车道场景追尾避撞控制。仿真和实车交叉验证试验表明：根据车辆期望横向加速度和期望横向位移建立的符合驾驶人换道避撞特性的五次多项式换道路径与驾驶人实际换道避撞路径基本吻合，结合碰撞时间和车间时距的制动避撞控制策略能够在保证车辆行驶安全舒适性的同时有效避免车辆追尾碰撞，减少交通事故的发生。     

汽车爆胎特性建模与主动制动控制策略

为了提高汽车在突发爆胎事故时的稳定性,对爆胎汽车主动制动控制策略进行了研究。根据车轮爆胎时间与压力变化的关系,在UniTire模型基础上建立了爆胎模型;根据电子稳定性控制系统中横摆角速度及质心侧偏角对汽车稳定性影响的关系,基于二自由度汽车动力学模型,通过计算汽车横摆角速度及质心侧偏角实际值与理想值的偏差,并基于线性二次型调节器最优控制方法决策出最优附加横摆力矩,从而修正爆胎后汽车的运动状态。最后通过计算机仿真对所提策略的有效性进行了验证。结果表明：主动制动控制策略可以保证爆胎过程中汽车的行驶稳定性和安全性。     

Optimal Control of the Tractor-Semitrailer Truck

SUMMARY

This paper is concerned with the braking performance and the handling behavior of the tractor-semitrailer truck under optimal braking. Optimal control theory is used in order to deal with the problem and a combination of the steepest descent method and the Davidon Fletcher Powell method is used to solve it numerically. Results for some chosen braking maneuvers are obtained for a nonlinear truck model which has 14 degrees of freedom. These results show that, for the chosen maneuvers an idealized anti-skid braking is close to being optimal in the sense defined in this paper. Implementation of an idealized anti-skid braking on the tractor-semitrailer truck, however, may be not desirable.     

Optimal control of brakes and steering for autonomous collision avoidance using modified Hamiltonian algorithm

ABSTRACT

This paper considers the problem of collision avoidance for road vehicles, operating at the limits of friction. A two-level modelling and control methodology is proposed, with the upper level using a friction-limited particle model for motion planning, and the lower level using a nonlinear 3DOF model for optimal control allocation. Motion planning adopts a two-phase approach: the first phase is to avoid the obstacle, the second is to recover lane keeping with minimal additional lateral deviation. This methodology differs from the more standard approach of path-planning/path-following, as there is no explicit path reference used; the control reference is a target acceleration vector which simultaneously induces changes in direction and speed. The lower level control distributes vehicle targets to the brake and steer actuators via a new and efficient method, the Modified Hamiltonian Algorithm (MHA). MHA balances CG acceleration targets with yaw moment tracking to preserve lateral stability. A nonlinear 7DOF two-track vehicle model confirms the overall validity of this novel methodology for collision avoidance.     

Automotive Steering Control in a Split-µ Manoeuvre Using an Observer-Based Sliding Mode Controller

Summary In this paper a sliding mode integral action controller and sliding mode observer are used to enhance vehicle stability in a split- µ manoeuvre. Anti-lock braking systems (ABS) have become an integral part of modern cars, and they have dramatically improved vehicle handling in braking manoeuvres. However, when a vehicle attempts to brake on a surface with uneven friction coefficient such as on wet or icy roads, a so-called split- µ scenario, the yaw moment generated by the asymmetric braking can prove demanding for an inexperienced driver. The controller presented hereworks in conjunction with a conventional ABS system to provide safe and effective braking through steer-by-wire. This paper extends previous state-feedback work by only using certain measurable quantities in the controller, estimating further signals by employing an observer.     

Automotive Steering Control in a Split-µ Manoeuvre Using an Observer-Based Sliding Mode Controller

Summary In this paper a sliding mode integral action controller and sliding mode observer are used to enhance vehicle stability in a split- µ manoeuvre. Anti-lock braking systems (ABS) have become an integral part of modern cars, and they have dramatically improved vehicle handling in braking manoeuvres. However, when a vehicle attempts to brake on a surface with uneven friction coefficient such as on wet or icy roads, a so-called split- µ scenario, the yaw moment generated by the asymmetric braking can prove demanding for an inexperienced driver. The controller presented hereworks in conjunction with a conventional ABS system to provide safe and effective braking through steer-by-wire. This paper extends previous state-feedback work by only using certain measurable quantities in the controller, estimating further signals by employing an observer.     

山区公路爬坡车道的交通特性及驾驶安全性模拟评价

以山区公路上设置的某一爬坡车道为试验对象,利用驾驶模拟试验对其交通特性及驾驶安全性进行仿真。根据设计图和现场环境构建了三维虚拟试验场景,通过VISSIM生成试验路段交通流;32名受试者在4种交通条件下进行了驾驶模拟试验;模拟过程中记录车辆的速度、轨迹、加速度、制动力等数据;通过VISSIM仿真试验确定了该爬坡车道的交通量阈值。分析结果表明,在常规交通流情况下,该爬坡车道可提高主路上的车速及其平稳性,同时可减少来自对向车道的冲突;但随着交通流量趋于饱和,其有效性逐渐减弱甚至产生负面影响。     

Brain limbic system-based intelligent controller application to lane change manoeuvre

This paper presents the application of a novel neuromorphic control strategy for lane change manoeuvres in the highway environment. The lateral dynamics of a vehicle with and without wind disturbance are derived and utilised to implement a control strategy based on the brain limbic system. To show the robustness of the proposed controller, several disturbance conditions including wind, uncertainty in the cornering stiffness, and changes in the vehicle mass are investigated. To demonstrate the performance of the suggested strategy, simulation results of the proposed method are compared with the human driver model-based control scheme, which has been discussed in the literature. The simulation results demonstrate the superiority of the proposed controller in energy efficiency, driving comfort, and robustness.